Author Topic: Fein Table-Top and Drill Jigs Support with Vecturo  (Read 1243 times)

0 Members and 1 Guest are viewing this topic.

Offline jbasen

  • Posts: 685
Fein Table-Top and Drill Jigs Support with Vecturo
« on: July 26, 2017, 10:11 PM »
Does anyone know if the Fein Table-Top and Drill Jigs Support (part # 9 26 02 083 01 0) is compatible with the Vecturo.  If not, is there an alternate solution for making precision vertical cuts with a Vecturo in the way the Fein Adapter allows you to plunge the tool with a drill press stand?

Here is a link to the item on the Fein web site:

https://fein.com/en_uk/oscillators/accessories/general-accessories/table-top-and-drill-jigs-support-order-no-9-26-02-083-01-0/

Thanks in advance for the help

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline jbasen

  • Posts: 685
Re: Fein Table-Top and Drill Jigs Support with Vecturo
« Reply #1 on: August 01, 2017, 03:10 PM »
I've had 341 views but nobody seems to know the answer to my question.   :'(

I also tried contacting Klingspor; one of the few companies I could find that is both a Festool dealer and carried the Fein Table-Top and Drill Jigs Support.  All I got back them was a quote straight from their lawyer.  "Festool does not support or condone using third party accessories, Blah, Blah, Blah."  Totally worthless.  [mad]

Does anyone know which Fein Supercut model the Vecturo is?  Then I can simply contact Fein to see if that Supercut model works with the Fein accessory I'm interested in.  There are multiple Supercut Construction models and also the Supercut Automotive line.  My guess is that it is the F.S.C 2.0 Q but I'd like to make sure.

Thanks




Offline antss

  • Posts: 1071
Re: Fein Table-Top and Drill Jigs Support with Vecturo
« Reply #2 on: August 01, 2017, 03:43 PM »
You're going to get much the same answer.

Vecturo is a Vecturo , not a Supercut xxx.xxxx. So no one is likely tell you an exact matchy matchy for certain number.  That is a newish and rare accessory so it's unlikely that anyone has rolled the dice to do exactly what you're asking.

Maybe you can be the pioneer and do a write up here for those that follow.
« Last Edit: August 02, 2017, 09:30 AM by antss »

Offline JMe

  • Posts: 3
Re: Fein Table-Top and Drill Jigs Support with Vecturo
« Reply #3 on: August 02, 2017, 09:12 AM »
jbasen,

try www.dm-tools.co.uk they also sell Fein and Festool

Hope that may help you

Jacques

Offline jbasen

  • Posts: 685
Re: Fein Table-Top and Drill Jigs Support with Vecturo
« Reply #4 on: August 02, 2017, 07:33 PM »
Thanks.  I'm continuing to research this and will report back when I'm able to figure it out.

Offline jbasen

  • Posts: 685
Re: Fein Table-Top and Drill Jigs Support with Vecturo
« Reply #5 on: August 07, 2017, 10:57 AM »
I believe that the Fein Table-Top and Drill Jigs Support can be used with a Vecturo though I haven't bought one yet to validate this.  There are 2 allen head screws on the Vecturo that hold the collar used for attaching the depth stop and plunge base attachments.  If you remove these 2 screws then the collar can be removed from the Vecturo.  I believe that the 2 threaded holes left on the Vecturo are the same as the holes on Multimaster and can be used to attach the  table-top and drill jigs support. 

Based on this I'll probably buy one of the Fein jigs later this fall and will then know for sure.

I also sent a message to Fein asking if the Supercut construction FSC 2.0 Q would work with the jig but never got a response.

Hope this helps.