Author Topic: Out feed table for Cabinet Saw  (Read 1497 times)

0 Members and 1 Guest are viewing this topic.

Offline gtin723

  • Posts: 14
Out feed table for Cabinet Saw
« on: January 07, 2018, 03:56 PM »
Finally built my out feed table for my cabinet saw.  Didn't need a monster table just a foldable table that stores out of the way when not in use.  Plans were from internet and all the dimensions had to be adjusted to fit individual saw but it works really well and a few coats of poly to offer some protection.  Used what I had in scraps mostly, some maple that was glued up for the beam and used for edging. 

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline SoonerFan

  • Posts: 416
Re: Out feed table for Cabinet Saw
« Reply #1 on: January 07, 2018, 08:14 PM »
Great job!  Looks great and I am sure the extra table space will be great.  Thanks for sharing.

Offline gtin723

  • Posts: 14
Re: Out feed table for Cabinet Saw
« Reply #2 on: January 07, 2018, 08:29 PM »
Thanks for the comments.  It really is amazing how much more enjoyable the cabinet saw is with the extra support.  You don't have to worry about moving around the saw to support the material.  The extension is only a little over 26" of additional support, as I wanted it to fold down out of the way and not hit the dust port, but it really makes a big difference.

Have a great new year!

Online HarveyWildes

  • Posts: 807
Re: Out feed table for Cabinet Saw
« Reply #3 on: January 08, 2018, 09:45 AM »
Nice!  The extra support makes a huge difference.