Author Topic: Fence Dogs with MFT3 and Incra Track System  (Read 1454 times)

0 Members and 1 Guest are viewing this topic.

Offline thedevme

  • Posts: 105
Fence Dogs with MFT3 and Incra Track System
« on: January 09, 2019, 03:59 PM »
Looking for pics to see if anyone has used these Fence Dogs with the 52" Incra Track System.  I would like to purchase and use with 2 MFT3 tables but do not want to waste my money.  I've seen that they are compatible but I can not find one picture that actually verifies these claims. Thank you

https://benchdogs.co.uk/collections/frontpage/products/fence-dogs

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline simonh

  • Posts: 62
Re: Fence Dogs with MFT3 and Incra Track System
« Reply #1 on: January 09, 2019, 04:09 PM »
I posted a picture here with the Fence Dogs and Incra 52" rail on an MFT

http://festoolownersgroup.com/festool-tools-accessories/mft-3-table-cut-repeatability/msg566900/#msg566900

Offline thedevme

  • Posts: 105
Re: Fence Dogs with MFT3 and Incra Track System
« Reply #2 on: January 09, 2019, 04:12 PM »
Thank you so much I don't know how I missed it must have not put in the right keywords - going to order them now.

Offline box185

  • Posts: 69
Re: Fence Dogs with MFT3 and Incra Track System
« Reply #3 on: January 09, 2019, 04:58 PM »
I posted an alternative approach here.

http://festoolownersgroup.com/festool-tools-accessories/mft-3-table-cut-repeatability/msg567007/#msg567007

Seems to accomplish the goal, without purchasing the Fence Dogs.

Paul

Offline thedevme

  • Posts: 105
Re: Fence Dogs with MFT3 and Incra Track System
« Reply #4 on: January 09, 2019, 05:09 PM »
Thanks @box185

Offline jeffm13

  • Posts: 16
Re: Fence Dogs with MFT3 and Incra Track System
« Reply #5 on: January 23, 2019, 01:18 AM »
The fence dogs are great.  I purchased two pair and I'm very happy with them.  I started out using them with a 30x60mm extrusion from Misumi Engineering on a home-made mft assembly bench.  I have since added a standard MFT fence from Festool (30mm is a bit tall for some operations).  The fence dogs work great with both. I did use some 6mm Misumi nuts with the Misumi extrusions because they're a bit bigger. But the nuts supplied with the fence dogs fit in the channels on the Festool fence just fine.
Festool: TS75, DF500, DF700, OF1400, LR32, ETS EC 150/5, DTS400, RS2E, T18, TXS, CT36, PS420, FS1400 (2), FS1400/2-LR 32, FS 2424/2-LR 32, Tradesman/Installer Cleaning Set; TSO: MTR-18, GRS-16 PE; UJK: Parf Dogs, Super Dogs, Parf Guide System MkII, Seneca: Parallel Guides, Domiplate, Domishim; Makita: 3000mm Guide Rail; Jessem: Mast-R-Lift w/metric conversion kit, Pow-R-Tec Router, Mast-R-Fence, Mit-R-Slide, ClearCut Stock Guides; Grizzly: G0441 Cyclone, G0691 Table Saw; Laguna: 18BX Bandsaw; Robland: X31 Combination Machine; Incra: MagnaLock Cleansweep; Woodpecker: 1281-300mm, 600mm T-Square, 1200mm Ruler, 1200mm Story Stick Pro; Bosch: GCM12SD Glide Miter Saw

Offline thedevme

  • Posts: 105
Re: Fence Dogs with MFT3 and Incra Track System
« Reply #6 on: January 23, 2019, 05:36 PM »
The fence dogs are great.  I purchased two pair and I'm very happy with them.  I started out using them with a 30x60mm extrusion from Misumi Engineering on a home-made mft assembly bench.  I have since added a standard MFT fence from Festool (30mm is a bit tall for some operations).  The fence dogs work great with both. I did use some 6mm Misumi nuts with the Misumi extrusions because they're a bit bigger. But the nuts supplied with the fence dogs fit in the channels on the Festool fence just fine. (Attachment Link)

@jeffm13 I actually just got mine in last week and I love them as well - I bought two one for my table and another for my ripping table.  They also work with the Incra fence as well.