Woodworking & Power Tools Forum - Festool Owners Group > FESTOOL DISCUSSIONS > Festool Jigs & Tool Enhancements > Festool Vac Sys - veneer press kit?
Pages: [1]   Go Down
« previous next »
  Print  
Author Topic: Festool Vac Sys - veneer press kit?  (Read 3054 times)
0 Members and 1 Guest are viewing this topic.
mattfc

Offline Offline

Location: Hertfordshire, UK
Member Since: Oct 2008
Posts: 465
« on: October 24, 2008, 06:00 AM »
Love the idea of the Vac Sys, haven't seen it in action yet, and is also pretty expensive. I might be able to justify it if I could use for dual purposes, such as for a vac press. What do you guys think, I have had a look at the spec, vacuum pressure seems fine, although flow rate is quite low compared to specific vacuum presses, that said, I guess the bulk of the "easy" air could be removed first with a vacuum cleaner, then the vac sys for the final stage.

Pump capacity: 2.7 m3/h at 50 Hz, 3.5 m3/h at 60 Hz
Imperial conversion= 1.75cubic foot min


Minimum vacuum: ≥ 810 mbar/ ≥ 81 %
Imperial conversion=1700 punds /sq ft

Thoughts?

Thanks
Matt
Logged
Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.

Bill Wyko

Offline Offline

Location: Tucson AZ 30 miles from water, 3 feet from heck.
Member Since: Mar 2008
Posts: 813
« Reply #1 on: October 28, 2008, 04:03 AM »
Go to www.veneersupplies.com Joe has vacuum systems for just about everything and plans and parts to make it yourself.
Logged
The bitterness of poor quality, lingers long after the cheap price is forgotten.
mattfc

Offline Offline

Location: Hertfordshire, UK
Member Since: Oct 2008
Posts: 465
« Reply #2 on: October 29, 2008, 05:50 AM »
Thanks for the link (although am UK based), any view as to whether the Festool Vac has enough power, or would another vacuum pump be required?
Logged
Eli

Offline Offline

Location: Melbourne, Australia
Member Since: Jul 2007
Posts: 2480


A Yankee in Kangaroo Court


WWW
« Reply #3 on: October 29, 2008, 06:54 AM »
I think it's probably got enough power. I tried it last weekend, it's got a lot of suck. I'm sure it's built quite well. Although it's continuous duty, a veneer vac doesn't seem huge, the ones I've seen. About comparable physical size. It could handle it I bet.
Logged
Do nothing, stay ahead.
Pages: [1]   Go Up
  Print  
« previous next »
 
Jump to: