Author Topic: JAMft - Just Another ...  (Read 9633 times)

0 Members and 1 Guest are viewing this topic.

Offline Irgendwer

  • Posts: 6
JAMft - Just Another ...
« on: March 16, 2015, 03:26 PM »
Hello,

When reading through the forums, i thought maybe my Version of a Multi Function Workbench might be of interest to some.

Just some pictures to start with:





* Werkbank.pdf (119.16 kB - downloaded 1058 times.)

If i would build one again, i wouldn't put those bevels on the Aluminium rails any more.
They were intended to provide access to all slots on all 4 sides of the table, but they're a mess to cut.
Same goal can be reached by having the long front rail about 12mm shorter on both ends (24mm total).

The profiles are ITEM, Size 8 (mainly 80/40). I just found out they're also available in NA http://www.item24us.com/

The normal Festool clamps fit into the slots.

The FS-Rapid doesn't fit out of the box, but i think you could do it by exchanging the nut.

Max


Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline lyam

  • Posts: 2
Re: JAMft - Just Another ...
« Reply #1 on: June 04, 2017, 07:44 AM »
hello just see your table i want one  like this  can you put  the plan for the little piece you use to make the feet folding  please

Offline Bob D.

  • Posts: 662
Re: JAMft - Just Another ...
« Reply #2 on: June 04, 2017, 08:27 AM »
Nicely done option to the MFT. Looks to be roughly the same
overall dimensions. 80/20 parts are not cheap though, how
does the price of all your parts plus the top compare to a MFT?

What I like about yours is the size can be adjusted to fit the
available work space or if you need something larger for your
projects you can expand it in length or width or both if need be.
-----
It's a table saw, do you know where your fingers are?