Author Topic: Power Mod for MFT/3  (Read 1989 times)

0 Members and 1 Guest are viewing this topic.

Offline bobberner

  • Festool Dealer
  • *
  • Posts: 52
Power Mod for MFT/3
« on: July 18, 2017, 09:11 PM »
Hi guys,

Here is a little thing I worked up out of scraps for convenience. It might not be very apparent in the photo, but I have one 1/4-20 bolt and wing nut to keep the device from moving around. My compressor and Midi are plugged in. The power strip only has a 15 amp breaker and my TS75 tripped it while I was ripping some 2" slightly warped oak.
As addictive as crack but more expensive.

Oohhhhhhhhhh, Festool.........

MFT/3, TS 75, RO 150, OF 1400, CT Midi.

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline ben_r_

  • Posts: 777
Re: Power Mod for MFT/3
« Reply #1 on: July 21, 2017, 06:23 PM »
Heres the 20 amp power strip I use: LINK
If at first you don't succeed, redefine success!

Offline Geoffrey

  • Posts: 3
Re: Power Mod for MFT/3
« Reply #2 on: July 22, 2017, 08:43 AM »
I have that same power strip plugged into a 20 amp circuit. Needed it for the DeWalt 735 planer.