Author Topic: Quick and Simple Kapex Table  (Read 8115 times)

0 Members and 1 Guest are viewing this topic.

Offline sakurama

  • Posts: 76
    • My real work
Quick and Simple Kapex Table
« on: March 12, 2013, 05:45 PM »
I make no pretenses to being a woodworker. I much prefer metal but the precision of Festool stuff is appealing enough to make me want to tackle projects in wood. Well, that and buying a house that needs a lot of cabinets and builtins is sort of forcing my hand. I have loved seeing all the various Sysports and work benches and at some point I'll make one but I need to start with making cabinets for the garage so I can start to put things away to make space so I can make cabinets for the house so I can move in. Lots of projects.

Anyway, I thought I'd show a very rough and fast base I made for my Kapex. I used two 1080 tables and the shelf is held with the table joining rails - it just slides in and then I bolt the Kapex down. It should work for the time being.







I plan to make a better version down the road with a real fence but right now this is working out.

Gregor
new york • portland • www.gregorhalenda.com

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline jobsworth

  • Posts: 4696
  • Burger Babe Says: I Even Buy Green Bananas
Re: Quick and Simple Kapex Table
« Reply #1 on: March 12, 2013, 06:20 PM »
pretty slick idea
Loving the Calif sun....

Offline kfitzsimons

  • Posts: 295
Re: Quick and Simple Kapex Table
« Reply #2 on: March 12, 2013, 07:02 PM »
Great idea. Does the table of the saw swing enough to cut 45 degree angles? I don't have a Kapex and it looks like the handle might not swing far enough, but I'm sure you made it so it would work.

Offline festooltim

  • Posts: 332
Re: Quick and Simple Kapex Table
« Reply #3 on: March 13, 2013, 08:50 AM »
I did the same thing  although I made it wider to fit the crown extensions. Love the set up if there is enough space on job site to allow it. Makes a versatile setup.
Quantity is no substitute for Quality

2-mft3's ,  ct22,  ts55,  rotex125,  c12, kapex,  ras115,  65planer,  of1010,  LR32system, trion psb 300 eq,  parrallel guides,    sortainer,  routerbitsystainer,  guide rail acc. kit,  toolie,  t-shirt,  hat,  pen,  saftey glasses.

Offline sakurama

  • Posts: 76
    • My real work
Re: Quick and Simple Kapex Table
« Reply #4 on: March 13, 2013, 09:27 AM »
Yeah, it is pretty wide. I bought some aluminum angle that I'll use to remake it a little more accurately and I think I'll incorporate some height adjusters so I can dial it in a little better. It works right now so ill live with it until the garage is clear enough to build something more permanent.
new york • portland • www.gregorhalenda.com

Offline PeterK

  • Posts: 954
Re: Quick and Simple Kapex Table
« Reply #5 on: March 13, 2013, 12:24 PM »
Brilliant and simple!

Offline skids

  • Posts: 931
Re: Quick and Simple Kapex Table
« Reply #6 on: March 26, 2013, 07:37 PM »
Love it
The funniest thing about this particular signature is that by the time you realise it doesn't say anything it's to late to stop reading it

Offline Alan m

  • Posts: 3302
Re: Quick and Simple Kapex Table
« Reply #7 on: March 26, 2013, 07:41 PM »
very good idea
"A pessimist sees the difficulty in every opportunity; an optimist sees the opportunity in every difficulty."
- Sir Winston Churchill (1874-1965)

Offline MKintrup

  • Posts: 10
Re: Quick and Simple Kapex Table
« Reply #8 on: January 19, 2018, 07:05 AM »
This is an amazing cool idea - I think I have to clone it, thank you so much for sharing

kind regards from germany
martin