Author Topic: router adjustable jig  (Read 65852 times)

0 Members and 1 Guest are viewing this topic.

Offline RENO

  • Posts: 45
router adjustable jig
« on: September 18, 2015, 12:41 PM »
built with 18mm plywood 4 meter alluminum curtain-rail, 6mm inbus
i used 3mm screws every 10cm to mount the rail sturdy
it all costs a few bucs on material (20 Euro thats about 21 Dollar)





« Last Edit: September 19, 2015, 12:14 AM by RENO »
OF900-TF900-PS2-TS55-DR7,2-DX93E-RO90DX-CS50-KAPEX120-basis1&expansion-and some more non Festool stuf to work my way in woodworking

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline waho6o9

  • Posts: 1336
    • Garage Door Handyman.com
Re: router adjustable jig
« Reply #1 on: September 18, 2015, 03:34 PM »
Excellent work Reno!

Offline mdamsma

  • Posts: 10
Re: router adjustable jig
« Reply #2 on: September 18, 2015, 05:01 PM »
Reno
where did you buy the rail ?
gamma/karwei/praxis ? ( all dutch shops for our foreign readers ☺)

Menno

Offline mike_aa

  • Posts: 1022
Re: router adjustable jig
« Reply #3 on: September 18, 2015, 07:30 PM »
RENO,
Nice and Simple!  I like it.

Does the same type of ball hex head screwdriver like the one supplied with the Festool MFS work on this?  Is that the reason for the extra flat bottom holes?

Thanks, Mike A.

Offline RENO

  • Posts: 45
Re: router adjustable jig
« Reply #4 on: September 19, 2015, 12:08 AM »
@ mdamsma:  Hornbach gordijnrail 1 t/m 3 mtr. voor de 2 mtr betaal je 5,5Euronen incl schroefjes en runners
ze hebben daar ook m6 imbus en m6 vierkante moerplaatjes
Ik heb m3 x 25 houtschroefjes gebruikt welke om de 10cm geboord met 5,2mm om de kopjes te verzinken
OF900-TF900-PS2-TS55-DR7,2-DX93E-RO90DX-CS50-KAPEX120-basis1&expansion-and some more non Festool stuf to work my way in woodworking

Offline RENO

  • Posts: 45
Re: router adjustable jig
« Reply #5 on: September 19, 2015, 12:09 AM »
@mike; i use a long non branded ballhead inbuswrench
OF900-TF900-PS2-TS55-DR7,2-DX93E-RO90DX-CS50-KAPEX120-basis1&expansion-and some more non Festool stuf to work my way in woodworking

Offline mdamsma

  • Posts: 10
Re: router adjustable jig
« Reply #6 on: September 19, 2015, 11:18 AM »
Reno,

Thanx, I've made the


It works oke.
But yours is so much easier to build

I keep it in my mind.

Groet Menno

Offline RENO

  • Posts: 45
Re: router adjustable jig
« Reply #7 on: September 19, 2015, 01:23 PM »
Hi Menno,
Thanks for your idea, because it was actually the basis for my curtain-rail jig
As i used my jig today, i noticed the missing of tracks for the festool-clamps
You made the T slots with your router, so you can clamp it anywhere.
I don't own a T-router bit, so i have to buy one soon. any suggestions what an where to buy?
OF900-TF900-PS2-TS55-DR7,2-DX93E-RO90DX-CS50-KAPEX120-basis1&expansion-and some more non Festool stuf to work my way in woodworking

Offline mdamsma

  • Posts: 10
Re: router adjustable jig
« Reply #8 on: September 19, 2015, 05:58 PM »
http://www.rvstools.nl/?catalogcategory/439216862/Sleutelgatfrees,+HM.aspx&catalog=1
Reno
I bought mine by van Rossum in Zwolle they have a webshop alswell
I bought both see the link

not to expensive

Menno



Offline emilykmiller79

  • Posts: 1
Re: router adjustable jig
« Reply #9 on: February 22, 2018, 12:53 PM »
Do you have step by step instructions on how to build this?

Offline Coen

  • Posts: 349
Re: router adjustable jig
« Reply #10 on: February 22, 2018, 03:54 PM »
http://www.rvstools.nl/?catalogcategory/439216862/Sleutelgatfrees,+HM.aspx&catalog=1
Reno
I bought mine by van Rossum in Zwolle they have a webshop alswell
I bought both see the link

not to expensive

Menno

Your deeplink doesn't work. But search for 150-8. At least; I guess that's the one you mean?

Offline mdamsma

  • Posts: 10
Re: router adjustable jig
« Reply #11 on: February 23, 2018, 06:20 PM »
Yep that’s the right one