Author Topic: RTS posts soon to be released Domino Symtrax preview  (Read 9213 times)

0 Members and 1 Guest are viewing this topic.

Offline clark_fork

  • Posts: 272
RTS posts soon to be released Domino Symtrax preview
« on: November 12, 2016, 04:12 PM »
Here is a peek at the new Domino combination self-centering guide:

http://www.dominoguide.com/

« Last Edit: November 13, 2016, 06:50 PM by clark_fork »
Clark Fork

"A lot of people are afraid of heights. Not me, I'm afraid of widths."  Stephen Wright

"straight, smooth and square" Mr. Russell, first day high school shop class-1954

" What's the good of it?" My Sainted Grandmother

"You can't be too rich, too thin or have too many clamps." After my introduction to pocket joinery and now the MFT work process

"Don't make something unless it is both made necessary and useful; but if it is both necessary and useful,
don't hesitate to make it beautiful." -- Shaker dictum

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline ear3

  • Posts: 3692
Re: RTS posts soon to be released Domino Symtrax hint
« Reply #1 on: November 12, 2016, 10:55 PM »
Looking forward to it.
Kapex KS 120 w/UG Cart and Extensions • CXS Set • T18+3 w/Centrotec Installer's Set • PDC 18/4 • TS 75 • TSC 55 • HKC 55 w/250, 420 and 670 FSK rails • Carvex 420 w/Accessory Kit • Domino 500 Set • Domino 700 XL • OF 2200 w/Base Accessory Kit • OF 1400 • OF 1010 • MFK 700 EQ Set • LR 32 • MFS 400 w/2000, 1000, and 700 extensions • Rotex 90 • Rotex 150 • LS 130 • ETS-EC 150/5 • ETS-EC 150/3 • Pro 5 LTD • RTS 400 • RAS 115.04 • RS 2 • HL 850 • Vecturo OS 400 • CT 26 w/BT module • CT Sys w/Long-Life Bag • MFT/3

Offline Rick Christopherson

  • Retailer
  • *
  • Posts: 1591
    • http://www.rts-engineering.com/
Re: RTS posts soon to be released Domino Symtrax hint
« Reply #2 on: November 13, 2016, 11:38 AM »
Geez, doesn't take you guys long. I just barely got those sites done like only a day ago.  [doh]

Offline Claimdude

  • Posts: 352
Re: RTS posts soon to be released Domino Symtrax hint
« Reply #3 on: November 13, 2016, 06:17 PM »
I have both of those Domino accessories but the pictures look the same as mine. Are the new ones improved in some way?

Thanks
Jack

Also a Maxsys x 2 owner.

Offline Rick Christopherson

  • Retailer
  • *
  • Posts: 1591
    • http://www.rts-engineering.com/
Re: RTS posts soon to be released Domino Symtrax hint
« Reply #4 on: November 13, 2016, 06:19 PM »
If you are seeing 2 pictures, it's because your browser hasn't refreshed. The whole web site has a new look.

Offline cariesexton

  • Posts: 4
Re: RTS posts soon to be released Domino Symtrax preview
« Reply #5 on: December 10, 2016, 03:38 PM »
How can I pre-order? [big grin]

Offline Claimdude

  • Posts: 352
Re: RTS posts soon to be released Domino Symtrax preview
« Reply #6 on: December 10, 2016, 07:28 PM »
Rick,

Count me in! I really like the new Symtrex.

Jack

Offline Rick Christopherson

  • Retailer
  • *
  • Posts: 1591
    • http://www.rts-engineering.com/
Re: RTS posts soon to be released Domino Symtrax preview
« Reply #7 on: December 10, 2016, 08:29 PM »
I'm still a little swamped with other stuff. Granted, Maxsys just went in to it's second production run, so that's one hurdle off my plate.

Offline DoubleL

  • Posts: 44
Re: RTS posts soon to be released Domino Symtrax preview
« Reply #8 on: December 11, 2016, 03:28 AM »
I would also like info on ordering.

Thanks.

Larry

Offline Gwerner

  • Posts: 251
  • They call me George...
Re: RTS posts soon to be released Domino Symtrax preview
« Reply #9 on: December 11, 2016, 04:36 AM »
Granted, Maxsys just went in to it's second production run, so that's one hurdle off my plate.

That's great to hear, I ordered a Maxsys this morning.

Offline Rick Christopherson

  • Retailer
  • *
  • Posts: 1591
    • http://www.rts-engineering.com/
Re: RTS posts soon to be released Domino Symtrax preview
« Reply #10 on: December 11, 2016, 05:12 AM »
Granted, Maxsys just went in to it's second production run, so that's one hurdle off my plate.

That's great to hear, I ordered a Maxsys this morning.

Thanks for your order. Yes, I got it.

Well I wasn't out of inventory yet, but when I opened up sales for redistribution a couple months ago, it sure got depleted quickly. I went with an even larger production run this time, and I'm thrilled with my suppliers that even with the custom components, they still hit about a 10-day turnaround for me. That's just unheard of.

I was actually sweating it there for a few days, because there are a couple of dealers that have been going like gangbusters, and any one of their orders could have wiped out my inventory before the new inventory arrived. 

Offline RobBob

  • Posts: 1362
Re: RTS posts soon to be released Domino Symtrax preview
« Reply #11 on: December 11, 2016, 10:40 AM »
@Rick Christopherson  That's great news, Rick.  I sure do like the Maxsys on my CT26. 

Maybe that provides incentive to take another look at designing a remote for the Mini and Midi?   [big grin]

Offline Rick Christopherson

  • Retailer
  • *
  • Posts: 1591
    • http://www.rts-engineering.com/
Re: RTS posts soon to be released Domino Symtrax preview
« Reply #12 on: December 11, 2016, 02:04 PM »
OK, let me throw out a little eye candy to distract you guys for a little while. This is my most favorite design. 1500 horsepower Nissan GT-R Intercooler end caps. The thing is, my client just went to a new machine shop to have these massive beauties machined at a much lower price. They remove almost 50 pounds of aluminum from the original billet.

So if my client trusts this new shop, so do I. I just need to contact him to see if he can do my more delicate machining. So that's where I'm at. I just need to get the design drawings completed and over to him.


Offline RKA

  • Posts: 1590
Re: RTS posts soon to be released Domino Symtrax preview
« Reply #13 on: December 11, 2016, 03:19 PM »
Wow, those are beauties!  Makes the aftermarket bits I'm familiar with look crude in comparison. 
-Raj

Offline mlkm18

  • Posts: 19
Re: RTS posts soon to be released Domino Symtrax preview
« Reply #14 on: December 12, 2016, 05:16 AM »
Can we pre-order? I surely want one.

Offline ben_r_

  • Posts: 1168
Re: RTS posts soon to be released Domino Symtrax preview
« Reply #15 on: December 18, 2016, 02:09 PM »
Im interested. How much?
If at first you don't succeed, redefine success!

Offline Cheese

  • Posts: 6004
Re: RTS posts soon to be released Domino Symtrax preview
« Reply #16 on: December 18, 2016, 02:34 PM »
OK, let me throw out a little eye candy to distract you guys for a little while. This is my most favorite design. 1500 horsepower Nissan GT-R Intercooler end caps...They remove almost 50 pounds of aluminum from the original billet.

Nice stuff...I especially like the machining around the lip seal areas.

Offline ihadmail

  • Posts: 9
Re: RTS posts soon to be released Domino Symtrax preview
« Reply #17 on: March 23, 2017, 11:11 PM »
Any firther update on when this will be available?

Offline kbwoodworker

  • Posts: 12
Re: RTS posts soon to be released Domino Symtrax preview
« Reply #18 on: February 02, 2019, 07:43 PM »
I'd like to purchase either the new Symtrax or one of the older models like the CT-10.  Are any of these going to be available in the future?