Author Topic: TS-55 "holster"  (Read 5815 times)

0 Members and 1 Guest are viewing this topic.

Offline dogutsukawu

  • Posts: 20
TS-55 "holster"
« on: May 25, 2010, 04:32 AM »
Others have built shelves and platforms on which to place the TS-55 between cuts to keep it safe and out of the way.  But the weight of the saw makes it awkward and a strain on the wrist to lift from a platform that is more or less horizontal and below the MFT.  My version more closely resembles a gun holster in concept.  The saw is rests almost vertically in the "holster" so that it can be inserted and removed easily without straining the wrist.  Notice the row of dominos in the bottom of the holster to catch the front edge of the sole and prevent the saw from tipping backward.

22327-0

22329-1

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline FEStastic

  • Posts: 102
Re: TS-55 "holster"
« Reply #1 on: May 25, 2010, 05:35 AM »
very Cool  [big grin]

How is it mounted ? Can it move ?

Ive found that my wrist is straining and will give this a try Thanks

Offline tigger

  • Posts: 193
Re: TS-55 "holster"
« Reply #2 on: May 25, 2010, 07:30 AM »
I have to say, this is clever. Good job!
If it 'aint Festool, it 'aint a tool !

Offline Rob-GB

  • Posts: 1087
Re: TS-55 "holster"
« Reply #3 on: May 25, 2010, 12:51 PM »
Nice concept! I like that you thought about the offside splinter guard by rebating the right side of the base to accomodate it, too.
Well thought out. [thumbs up]
Rob.

Offline dogutsukawu

  • Posts: 20
Re: TS-55 "holster"
« Reply #4 on: May 25, 2010, 01:00 PM »
The holster is "hung" from the T-slot underneath the MFT side rail with 2 bolts, washers, and nuts.  Loosening the bolts will allow the holster to be moved along the rail or removed entirely.

Offline bonesbr549

  • Posts: 543
  • I'd rather be woodworking
Re: TS-55 "holster"
« Reply #5 on: May 25, 2010, 01:47 PM »
Thats cool. I've often thought I like something like that.  I keep my ct33e close with the hose cady on top.  I have a mdf cut out that sits on top (wher you can put a systainer) and just plop it on that.   Your's looks cool.  Mind sharing the dimensions so we could replicate?

Offline Greg Powers

  • Posts: 2282
  • Metric convert
    • Stargate Unofficiial
Re: TS-55 "holster"
« Reply #6 on: May 26, 2010, 12:16 PM »
Great Solution! I want one...
Greg Powers
Size:XL

Offline GarryMartin

  • Posts: 1796
Re: TS-55 "holster"
« Reply #7 on: January 28, 2019, 03:48 AM »
Not my photos, but I have a few photos saved in notebooks from a time before they were lost. These are the images in the original post.




Offline Mario Turcot

  • Posts: 907
Re: TS-55 "holster"
« Reply #8 on: January 28, 2019, 07:07 AM »
Thank you Garry  [thumbs up]
Mario

Offline thedevme

  • Posts: 105
Re: TS-55 "holster"
« Reply #9 on: January 28, 2019, 06:17 PM »
@GarryMartin literally saves the images on all of the amazing posts pre DB era lol you literally are the man