Author Topic: Latest TSO Product  (Read 7437 times)

0 Members and 1 Guest are viewing this topic.

Offline Cheese

  • Posts: 5802
Latest TSO Product
« on: December 15, 2018, 07:28 PM »
Check this out...and such a simple concept.  [smile]

https://youtu.be/1s0x4gtuxMM?t=6

Offline Peter Halle

  • Global Moderator
  • *
  • Posts: 11856
Re: Latest TSO Product
« Reply #1 on: December 16, 2018, 07:41 AM »
This topic has been restored.

Peter

Offline Gregor

  • Posts: 1238
Re: Latest TSO Product
« Reply #2 on: December 16, 2018, 08:32 AM »
Interesting.

Now combine that with the makita way of having a lower part that spreads the load to protect the slot bottoms from being deformed by the screws - with something that holds both parts together when removing the connector - and it would be something.

Offline blaszcsj

  • Posts: 430
  • I like building stuff with my hands.
Re: Latest TSO Product
« Reply #3 on: December 16, 2018, 09:27 AM »
This looks exactly like the rail connectors Woodpecker used to fix their parallel cut system a few years back.
OF1010 EQ Router | MFT/3 | DF500Q | Carvex 420 | ETS EC 150/3 | CT 36 Auto Clean | TSC55 | LR32 | OF1400 EQ Router | ZOBO Metric Set | CXS Li 2.6 - 90 Limited Edition | Universal Cleaning Set | HKC55 | Centrotec CE-SORT | RO150 FEQ | DTS 400 | RO90 DX | CTSYS | C18 Drill | SysLite KALII | Syslite STL 450 | RAS 115 E | OF2200 EB

Offline Cochese

  • Posts: 309
    • The 144 Workshop
Re: Latest TSO Product
« Reply #4 on: December 16, 2018, 09:29 AM »
Interesting, I was going to pick up the Betterley connector after Christmas.

Offline Svar

  • Posts: 1679
Re: Latest TSO Product
« Reply #5 on: December 16, 2018, 10:08 AM »
The connectors are quite thin. Can you trust them to remain straight and be rigid enough to act like alignment tool?

Online DynaGlide

  • Posts: 371
Re: Latest TSO Product
« Reply #6 on: December 16, 2018, 10:29 AM »
I think not having them like the Makita was a big miss.
@matts.garage

Offline Corwin

  • Posts: 2644
Re: Latest TSO Product
« Reply #7 on: December 16, 2018, 01:19 PM »
I like the idea of these. However, I think that some have rails that differ slightly and may only want one of these to align the inner (center) T-slots while leaving the outer (left edge) T-slots to be joined with a connector that does not self align.

Offline Svar

  • Posts: 1679
Re: Latest TSO Product
« Reply #8 on: December 16, 2018, 01:30 PM »
I like the idea of these. However, I think that some have rails that differ slightly and may only want one of these to align the inner (center) T-slots while leaving the outer (left edge) T-slots to be joined with a connector that does not self align.
Excellent point.


Offline duburban

  • Posts: 1027
Re: Latest TSO Product
« Reply #10 on: December 16, 2018, 05:57 PM »
cool, i agree.

Just cannot beat the wedge system. I made 2 pair and finally feel good about having my tracks connected.
helper: i used a festool "circular saw" to do something simple and it made it really hard

me: exactly, it makes simple cuts complicated and complicated cuts simple

Offline Peter Halle

  • Global Moderator
  • *
  • Posts: 11856
Re: Latest TSO Product
« Reply #11 on: December 16, 2018, 07:28 PM »
Two threads have been merged.

Peter Halle - Moderator

Offline dlu

  • Posts: 158
Re: Latest TSO Product
« Reply #12 on: December 16, 2018, 08:41 PM »
Cool, and disappointing - wish that they didn't have the grub screw bearing on the track. Even the "inverted flathead" screw that Woodpecker uses would be a big improvement IMHO.

Offline TSO_Products

  • Retailer
  • *
  • Posts: 71
    • TSO Products LLC
Re: Latest TSO Product
« Reply #13 on: December 17, 2018, 01:31 PM »
thank you all for the comments - and helpful feedback!
We also check our email box
                                              info@tsoproducts.com
for customer comments to hear from folks who actually have used the product.

We will respond to the questions in the preceding posts after we see a pattern. If we have made design choices that are not spot on, or fall short of reasonable customer expectations, we will acknowledge that and fix them to the extent that may be feasible. That's how we and our products get better [smile]

Hans and Eric


Offline Svar

  • Posts: 1679
Re: Latest TSO Product
« Reply #14 on: December 17, 2018, 02:30 PM »
I think not having them like the Makita was a big miss.
Perhaps only a thin spacer under the set screw. In TSO design the connector is acting as a straight edge and needs to be rigid. It is already quite thin. Making it in two pieces (like Makita's) will weaken it even more.
As previously mentioned an inverted flat head, perhaps with plastic padding, should work well.

Online Richard/RMW

  • Posts: 1840
Re: Latest TSO Product
« Reply #15 on: December 17, 2018, 03:59 PM »
Or just use non-marring set screws like these and don't crank them down too tight.

https://www.mcmaster.com/set-screws

Love the TSO products that I have (latest order showed up today) and really respect Hans and Eric for their innovation however $50 does seem a mite steep.

RMW
As of 10/17 I am out of the Dog business and pursuing other distractions. Thanks for a fun ride!

Offline gunnyr

  • Posts: 168
    • https://www.instagram.com/compassfinecarpentry/
Re: Latest TSO Product
« Reply #16 on: December 18, 2018, 08:38 PM »
The Betterly StraightLine Tool is $109, the Festool Connectors are $40 for the pair.  $50 for a tool that replaces both seems pretty good to me!  As I already have the Betterly and two sets of Festool Connectors I don't see the need for the TSO product, if I didn't have the Betterly I would jump on these!

I don't understand the concern about dimpling the guide rails with the connector set screws.  I simply snug down the set screws and move on.  Yep, my rails have dimples in them.  To date it has not affected their functionality.  What am I missing?
Semper Fi,
Jeff

TS 55 REQ|HKC 55|PSB 420|DF 500|PRO 5 LTD|ETS 150/3|DTSC 400|RO 90|RO 150|OF 1400|MFK 700|LR 32|MFS 400/700|CXS (2)|PDC 18|DWC 18-4500|CT MIDI|CT 26|CT 48|MFT/3 (2)|VAC SYS-SET|DUO-SET|SYSLITE KAL II
US Marines - UK Wildcats - Cincinnati Reds

Offline TSO_Products

  • Retailer
  • *
  • Posts: 71
    • TSO Products LLC
Re: Latest TSO Product
« Reply #17 on: December 18, 2018, 11:24 PM »
Richard,
Thank you for your kind remarks about TSO and your set screw suggestion – which is exactly what is  standard on the GRC-12 Connectors (see picture)

Your comment about TSO being “a mite” pricey tells us we need to be more clear:
It’s easy to overlook that it requires two (2) connectors while Makita and Festool sell and price them as individual units
Because the Makita connector consist of two stamped steel strips it’s easy to think the set, consisting of two stamped steel strips provides two connectors but actually  requires 2 sets of these. So here is the cost picture:

TSO GRC-12 consisting of 2 fully machined connectors $ 49.95
MAKITA one 2-piece stamped steel strip Connector $ 24.99  requires 2 sets = $ 49.98
Festool Connectors $ 20.00 ea. – requires 2 = $ 40.00

Thanks guys for your interest
Hans and Eric

Offline tjbnwi

  • Posts: 5924
  • Cedar Tucky Indiana
Re: Latest TSO Product
« Reply #18 on: December 18, 2018, 11:29 PM »
@TSO Products,

Thank you for clearing up the set screw question. My guess was they were soft nose set screws, but it is not clear in the video or on the website.

Tom

Online Richard/RMW

  • Posts: 1840
Re: Latest TSO Product
« Reply #19 on: December 19, 2018, 08:27 AM »
Richard,
Thank you for your kind remarks about TSO and your set screw suggestion – which is exactly what is  standard on the GRC-12 Connectors (see picture)

Your comment about TSO being “a mite” pricey tells us we need to be more clear:
It’s easy to overlook that it requires two (2) connectors while Makita and Festool sell and price them as individual units
Because the Makita connector consist of two stamped steel strips it’s easy to think the set, consisting of two stamped steel strips provides two connectors but actually  requires 2 sets of these. So here is the cost picture:

TSO GRC-12 consisting of 2 fully machined connectors $ 49.95
MAKITA one 2-piece stamped steel strip Connector $ 24.99  requires 2 sets = $ 49.98
Festool Connectors $ 20.00 ea. – requires 2 = $ 40.00

Thanks guys for your interest
Hans and Eric

No offense intended guys, the comment wasn't meant in relation to other alternatives. I should reserve my yapping on prices, cost is relative to value & value is dependent on utility/functionality.

I highly value stuff that just works for it's intended purpose, which your guide squares are a prime example of, and I am sure these connectors fit that category as well.

Keep up the great work.

RMW
As of 10/17 I am out of the Dog business and pursuing other distractions. Thanks for a fun ride!

Offline Chippiegary

  • Posts: 8
Re: Latest TSO Product
« Reply #20 on: December 19, 2018, 05:23 PM »
Was wondering if these connectors are going to be available in the Uk ?,post and packing from USA makes them ridiculously expensive , asked the question via email from Tso no reply yet ?

Offline neilc

  • Posts: 2625
Re: Latest TSO Product
« Reply #21 on: December 20, 2018, 06:29 PM »
Just received my set.  I'll try them out in the next couple of days.


Offline Peter Halle

  • Global Moderator
  • *
  • Posts: 11856
Re: Latest TSO Product
« Reply #22 on: December 20, 2018, 07:49 PM »
@neilc , looking forward to your thoughts!

Peter

Offline Cochese

  • Posts: 309
    • The 144 Workshop
Re: Latest TSO Product
« Reply #23 on: December 21, 2018, 10:28 AM »
@neilc , looking forward to your thoughts!

Peter

Same. When you consider the Betterley is $100 and still needs a set of connectors, for $50 this seems like a pretty smart play if everything lines up like it should.

Offline Gregor

  • Posts: 1238
Re: Latest TSO Product
« Reply #24 on: December 23, 2018, 04:52 AM »
@TSO_Products is there a european distributor? Shipping these from the US would be prohibitive costwise.

Offline TSO_Products

  • Retailer
  • *
  • Posts: 71
    • TSO Products LLC
Re: Latest TSO Product
« Reply #25 on: December 23, 2018, 12:36 PM »
Was wondering if these connectors are going to be available in the Uk ?,post and packing from USA makes them ridiculously expensive , asked the question via email from TSO no reply yet ?

YES,  www.axminster.co.uk will have stock as soon as we get production ramped up to supply everyone. Our dealers are not set up yet Meanwhile we can fill individual small orders  and ship via US Postal International First Class. We will announce it via our TSO INSIDER newsletter. GO to www.tsoproducts.com and click on subscribe.

Thank you for asking!

Hans and Eric

Offline TSO_Products

  • Retailer
  • *
  • Posts: 71
    • TSO Products LLC
Re: Latest TSO Product
« Reply #26 on: December 23, 2018, 12:48 PM »
@TSO_Products is there a european distributor? Shipping these from the US would be prohibitive costwise.

@Gregor - on the European continent TSO Products are well stocked by http://www.bannedlink.com/ in Amsterdam.
as we replied earlier to the availability question in the UK, we are gearing up to supply stock of the GRC-12 Connector Set to our international dealers. In the meantime we can fill small individual International orders via US Postal International First Class mail.

Hans and Eric

Offline TSO_Products

  • Retailer
  • *
  • Posts: 71
    • TSO Products LLC
Re: Latest TSO Product
« Reply #27 on: December 23, 2018, 01:00 PM »
I like the idea of these. However, I think that some have rails that differ slightly and may only want one of these to align the inner (center) T-slots while leaving the outer (left edge) T-slots to be joined with a connector that does not self align.

@Corwin - glad you raised that question because we addressed that close tolerance concern and guide rail variability from the beginning. Remember that our GRS-16 series Guide Rail Squares are designed to handle the normal production variances of Guide Rail Extrusions. We sweated that quite a bit in the beginning to get it right and have that issue well in hand. Your comment highlights the fact that there is more to getting it right than meets the eye.

Thank you for nudging us to point this out. We regularly ask ourselves if we are providing too much information about our products and our customer's eyes glaze over or if we don't provide enough. We'll add a paragraph about this on our website product page.

Hans

Offline neilc

  • Posts: 2625
Re: Latest TSO Product
« Reply #28 on: December 23, 2018, 10:28 PM »
I put the GRC-12 connectors on a pair of 1080 guide rails.

The GRC-12 units are slightly thicker than the Festool ones given the bevel.  They are made from aluminum rather than steel.  They include allen head screws and a wrench rather than typical straight-head screws for adjustment.  (BTW, I also made a set of connectors similar to the Makita ones out of a couple of pieces of steel and they work, but the allen screws are a little small for much torque to tighten them and I don't use them as much as I have used the Festool connectors because of that.)

I installed the GRC-12 units in one rail, tightened them and then slid the second rail in place leaving a slight space between the two rails - maybe 1/16" and tightened them up with no straightedge.  Upon checking with a Festool level for a straightedge, the outside edge was off by .004" over the length of the level.  However, when aligning the level to the inside extrusion, it was dead-on with no measurable error in alignment.

I then picked up the guide rail in the middle and shook it a bit while on the edge, to see how it deflected when two were clamped together.  I did notice upon placing it back down on the bench that the rails were no longer straight.  They were out of alignment by perhaps 1/8" and I had to straighten them out.  I did not try a similar technique with the Festool connectors but I would bet they too would slip.  I had hoped the GRC-12 connectors would 'hold' given the beveled clamping method.  But there is a lot of force across a nearly 2200mm rail when you start shaking it.

To be honest, I'm pretty careful with connected rails when moving them so my 'shake test' might be considered a bit extreme.  But I wanted to see if the connectors would keep things in alignment. 

I'll spend some more time with them and report back what I find.

I'd say the connectors are definitely easier to install and get set up - and I like the hex head screws for easier adjustment.  Based on a quick test, they aligned upon first install very well.  But I think regardless of the connectors (festool, TSO, Makita) you're going to want to still use care when moving connected rails to insure they stay straight.

neil


TSO thickness



Festool thickness



.004 alignment variation on outside extrusion of rail



No alignment variation on inside extrusion

Offline ScotF

  • Posts: 2585
Re: Latest TSO Product
« Reply #29 on: December 24, 2018, 12:34 AM »
Good test, Neil. Thanks for the pics and write-up. I am curious why these would not be longer - seems that a longer length would be more secure. I too am careful when connecting rails, but I have had them move and it is frustrating. I was hoping this would solve that issue, but looks like that might not be the case. I would be interested in hearing how these perform as you put them through more testing.  Thanks!

Online Richard/RMW

  • Posts: 1840
Re: Latest TSO Product
« Reply #30 on: December 24, 2018, 07:22 AM »
Neil thanks for the testing/results. One of the best aspects of the squares is not even having to wonder if it.s square, i.e. I just attach and cut. If you have to stop and check the joined rails frequently just for peace of mind it will somewhat eliminate the benefits of their self aligning aspect.

Just my [2cents]

RMW
As of 10/17 I am out of the Dog business and pursuing other distractions. Thanks for a fun ride!

Offline NL-mikkla

  • Posts: 296
  • www.m144h.com
Re: Latest TSO Product
« Reply #31 on: December 24, 2018, 09:45 AM »
LOL, simple adjustment to an old ongoing problem/discussion.
Festool must feel silly for not thinking of this solution.

Offline ChuckM

  • Posts: 934
Re: Latest TSO Product
« Reply #32 on: December 24, 2018, 01:49 PM »
LOL, simple adjustment to an old ongoing problem/discussion.
Festool must feel silly for not thinking of this solution.
Big, bureaucratic companies are more prone to ignoring or missing opportunities to improve little things, while small, entrepreneurial businesses are more responsive to or quicker in responding to market feedback.

Offline TSO_Products

  • Retailer
  • *
  • Posts: 71
    • TSO Products LLC
Re: Latest TSO Product
« Reply #33 on: December 28, 2018, 02:31 PM »
FOG Members and customers:
We appreciate the comments and feedback. Neil’s report is very helpful, too – thank you. 
We made a mistake in judgement to start shipping because we got such excellent results in testing- obviously not sufficiently “life-like” testing – Lesson learned:
                                     no new TSO products go into production without outside BETA testing.

Based on what we have learned, we launched an initiative to test further design refinements.  When we have new parts to BETA test, we will put them in the hands of volunteer individuals, including some current purchasers, to see how far we can improve on the original design.

Meanwhile we have stopped accepting orders and notified purchasers of this product. If we can demonstrate in BETA testing that we have in fact achieved the desired improvements we will exchange customer owned GRC-12’s at no charge before resuming production shipments. Customers who wish to return their GRC-12 will of course get a refund with free return shipping.

The first step is to get to next design revision and complete testing. We expect this will take us into February. Meanwhile, thank you for your continued support.

Hans

Online Richard/RMW

  • Posts: 1840
Re: Latest TSO Product
« Reply #34 on: December 28, 2018, 03:36 PM »
Kudos Hans, well played. Hope your new design meets a set & forget standard, it will be a great addition to the product line.

RMW

FOG Members and customers:
We appreciate the comments and feedback. Neil’s report is very helpful, too – thank you. 
We made a mistake in judgement to start shipping because we got such excellent results in testing- obviously not sufficiently “life-like” testing – Lesson learned:
                                     no new TSO products go into production without outside BETA testing.

Based on what we have learned, we launched an initiative to test further design refinements.  When we have new parts to BETA test, we will put them in the hands of volunteer individuals, including some current purchasers, to see how far we can improve on the original design.

Meanwhile we have stopped accepting orders and notified purchasers of this product. If we can demonstrate in BETA testing that we have in fact achieved the desired improvements we will exchange customer owned GRC-12’s at no charge before resuming production shipments. Customers who wish to return their GRC-12 will of course get a refund with free return shipping.

The first step is to get to next design revision and complete testing. We expect this will take us into February. Meanwhile, thank you for your continued support.

Hans
As of 10/17 I am out of the Dog business and pursuing other distractions. Thanks for a fun ride!

Offline ChuckM

  • Posts: 934
Re: Latest TSO Product
« Reply #35 on: December 28, 2018, 03:42 PM »
No way a company such as Festool or Bosch or the like can respond to the market in a speedy manner like that.

By the way, a while back, TSO has indicated a new Domino Joiner accessory is being worked on. Any update on that (we don't know what it is or what it does based on the scan info. provided at that time)?
« Last Edit: December 28, 2018, 03:44 PM by ChuckM »

Offline Cochese

  • Posts: 309
    • The 144 Workshop
Re: Latest TSO Product
« Reply #36 on: December 28, 2018, 04:39 PM »
FOG Members and customers:
We appreciate the comments and feedback. Neil’s report is very helpful, too – thank you. 
We made a mistake in judgement to start shipping because we got such excellent results in testing- obviously not sufficiently “life-like” testing – Lesson learned:
                                     no new TSO products go into production without outside BETA testing.

Based on what we have learned, we launched an initiative to test further design refinements.  When we have new parts to BETA test, we will put them in the hands of volunteer individuals, including some current purchasers, to see how far we can improve on the original design.

Meanwhile we have stopped accepting orders and notified purchasers of this product. If we can demonstrate in BETA testing that we have in fact achieved the desired improvements we will exchange customer owned GRC-12’s at no charge before resuming production shipments. Customers who wish to return their GRC-12 will of course get a refund with free return shipping.

The first step is to get to next design revision and complete testing. We expect this will take us into February. Meanwhile, thank you for your continued support.

Hans

Man, while I'm disappointed that I can't order (literally had my card out), I appreciate the attention to detail.

Offline TSO Products

  • Retailer
  • *
  • Posts: 758
    • TSO Products
Re: Latest TSO Product
« Reply #37 on: December 28, 2018, 08:22 PM »
No way a company such as Festool or Bosch or the like can respond to the market in a speedy manner like that.

By the way, a while back, TSO has indicated a new Domino Joiner accessory is being worked on. Any update on that (we don't know what it is or what it does based on the scan info. provided at that time)?

@ChuckM  - while it's off-topic for this thread let me share with you that BETA testing resulted in the addition of another feature benefit which is going back into machining the next btach of BETA test units. NO Launch date yet. Staytuned to TSO INSIDER newsletter  [smile]
Hans
TSOproducts.com

Home of the GRS-16 and GRS-16 PE  plus TPG Parallel Guide -  the MTR-18 Triangle and Work Holding solutions plus AXMINSTER UJK in the USA

Offline box185

  • Posts: 69
Re: Latest TSO Product
« Reply #38 on: December 29, 2018, 01:02 PM »
It seems to me that a design based on the Wedgelock product would be a better option. If only they were available in a suitable size.

http://www.wakefield-vette.com/products/accessories/wedgelocks.aspx

Offline TSO Products

  • Retailer
  • *
  • Posts: 758
    • TSO Products
Re: Latest TSO Product
« Reply #39 on: December 29, 2018, 01:32 PM »
It seems to me that a design based on the Wedgelock product would be a better option. If only they were available in a suitable size.

http://www.wakefield-vette.com/products/accessories/wedgelocks.aspx

@box185  - thank you for offering a helpful suggestion. We agree and we seriously looked at the wedge approach as well as other means of adjusting the crossection of the Connector. But very quickly the complexity, production cost and resulting selling price moved this out of final consideration. We're not afraid of revisiting any of these alternatives should we not be successful in producing a "TSO worthy" configuration of the current concept.

Keep the suggestions coming while we modify and test the current concept!
Hans
TSOproducts.com

Home of the GRS-16 and GRS-16 PE  plus TPG Parallel Guide -  the MTR-18 Triangle and Work Holding solutions plus AXMINSTER UJK in the USA

Offline TSO Products

  • Retailer
  • *
  • Posts: 758
    • TSO Products
Re: Latest TSO Product
« Reply #40 on: December 29, 2018, 02:02 PM »
more on the wedgelock concept:
here is a link with a more detailed illustration
                  http://www.wakefield-vette.com/products/accessories/wedgelocks/-d-series.aspx

One of the challenges TSO faced in choosing the design direction was the fact that our Connector would need to be adjustable from the "side' of the assembly - rather than in the preferred longtitudinal direction. The wedgelock design as you can see from the exploded catalog view is aleady a complex set of parts in its existing arrangement. Now add the need for adjustment from the side and you can see why we felt we should move on to other approaches.

That said, the idea of searching for inspiration in unrelated technical fields is certainly the right one.
During the Cold War era the Soviet Union made a concerted effort to find ways to apply results of their space program research to other commercial applications. After "that"  Wall came down, this research effort became public. I took the opportunity to attend a day long training  session in  a Lockheed Martin conference room to familiarize myself with this approach to inventing solutions. Certainly opened my mind to always look much more broadly at possible solutions.

I could imagine that in the medical field there are methods and devices which could inspire. In our woodworking applications the challenge quickly narrows down to low product cost at (relatively) very low unit volume - which limits what you can spend on tooling.

Keep the ideas coming!

Hans
TSOproducts.com

Home of the GRS-16 and GRS-16 PE  plus TPG Parallel Guide -  the MTR-18 Triangle and Work Holding solutions plus AXMINSTER UJK in the USA

Offline box185

  • Posts: 69
Re: Latest TSO Product
« Reply #41 on: December 29, 2018, 02:57 PM »

One of the challenges TSO faced in choosing the design direction was the fact that our Connector would need to be adjustable from the "side' of the assembly - rather than in the preferred longtitudinal direction. The wedgelock design as you can see from the exploded catalog view is aleady a complex set of parts in its existing arrangement. Now add the need for adjustment from the side and you can see why we felt we should move on to other approaches.


It seems that the socket head could be accessible along the direction of the slot in the Festool Guide Rail using a ball driver - similar to some of the 80/20 connectors.

Among other applications, the Wedgelock product is used in military applications - holding circuit card assemblies in the equipment chassis. This application endures significant vibration testing without failure.

I agree that looking for solutions outside of the box is useful - one of the reasons that a forum is so valuable. Everyone has a different experience.

I’ve contacted the manufacturer of the Wedgelock to find out if the have other sizes available. The Festool application is probably larger than what they typically deal with, but I wanted to ask.

Offline TSO Products

  • Retailer
  • *
  • Posts: 758
    • TSO Products
Re: Latest TSO Product
« Reply #42 on: December 29, 2018, 03:32 PM »
@box185 - you're quite right that a ball driver with a long enough blade or a flexible shaft driver could be made to work. Where we derailed with the wedge or other expansion device was the cost imposed by market level pricing for such a low volume item in woodworking.
it would be interesting to see a proforma itemized list of parts with production and tooling cost for every single line item, plus tooling amortization and see what selling price would have to result.

Ask what the individual cost of the mass produced "D" Wedgelock is.

Hans
TSOproducts.com

Home of the GRS-16 and GRS-16 PE  plus TPG Parallel Guide -  the MTR-18 Triangle and Work Holding solutions plus AXMINSTER UJK in the USA

Offline rst

  • Posts: 2156
Re: Latest TSO Product
« Reply #43 on: December 29, 2018, 04:55 PM »
Whenever I design a jig or tool modification, I always subject it to the KISS principle, a philosophy very similar to Ocam's Razor... Keep It Simple Stupid.  It always amazes me how many things a designed in an overly complicated manner.  I sell service and repair Gyro Tech automatic doors.  The gearbox for their automatic swinging doors was the original non-hydraulic or air operated door opener.  It was designed by one man in the 60's and every part excepting the motor and controls is exactly like the original today.  How many designs can claim that...not even Festool.

Offline JD2720

  • Posts: 1078
Re: Latest TSO Product
« Reply #44 on: December 29, 2018, 06:36 PM »
I put the GRC-12 connectors on a pair of 1080 guide rails.


No alignment variation on inside extrusion
(Attachment Link)

Isn't the inside extrusion, where the saw rides, the only extrusion that needs to be in alignment?
That is where my alignment jigs mount.

Offline TSO Products

  • Retailer
  • *
  • Posts: 758
    • TSO Products
Re: Latest TSO Product
« Reply #45 on: December 29, 2018, 11:18 PM »
I put the GRC-12 connectors on a pair of 1080 guide rails.


No alignment variation on inside extrusion
(Attachment Link)

Isn't the inside extrusion, where the saw rides, the only extrusion that needs to be in alignment?
That is where my alignment jigs mount.

@JD2720  -You are correct to the extent  that you are talking about "lining up the two ends of the upside-down t-slot the saw rides on. That's the easy part. The challenge is to keep both tracks pointed, as perfectly as possible, in a straight line.

hope that helps clarify when we're talking about "aligning"

Hans
TSOproducts.com

Home of the GRS-16 and GRS-16 PE  plus TPG Parallel Guide -  the MTR-18 Triangle and Work Holding solutions plus AXMINSTER UJK in the USA

Offline box185

  • Posts: 69
Re: Latest TSO Product
« Reply #46 on: December 30, 2018, 12:13 AM »
I had some time this evening to look at pricing for the Wakefield-Vette Wedgelock products.

http://www.wakefield-vette.com/products/accessories/wedgelocks.aspx

I searched for the 426C7 series and found this

http://www.nextwarehouse.com/item/?2076899_g10e&gclid=EAIaIQobChMIvrDhyOHG3wIVhLrACh34cQgTEAkYAiABEgIQOfD_BwE

Another search for the 422C-480UMB-CKP product ( slightly narrower ) yielded this.

https://www.ttiinc.com/content/ttiinc/en/apps/part-detail.html?partsNumber=422C-480UMB-CKP&mfgShortname=WKV&utm=ga-shopping&channel=ppc&source=google&campaigns=tti-brand&gclid=EAIaIQobChMI_s-RvuTG3wIVE57ACh1qXg8wEAkYASABEgJfqvD_BwE

Both of these parts are too small for the Festool Rail Guide, but this information is provided for reference. It does seem that a narrow strip of material could be attached to the Wedgelock, making it fit into the Festool Guide Rail.

Offline Gregor

  • Posts: 1238
Re: Latest TSO Product
« Reply #47 on: December 30, 2018, 07:28 AM »
While the principle of the wedgelock is great when your want to apply pressure along a seam (or a card in a holder) it might fall short when it comes to aligning the t-slots at the seam between two FS rails. This would need some testing.

But to have a rail connector operate on the sides of the t-slots (instead of top and bottom, as all current solutions do) would IMHO be a good idea to follow as the sides of the slot have to be parallel and in one line to get a straight cut.

A slight deviation in the vertical direction would worst case hinder movement of the saw (it might catch on the ledge) if there would be an offset at the rails seam, but that shouldn't happen when the rails lie on a flat surface when being connected and the flexibility of the rail itself should compensate for any slight non-parallelism on the vertical axis...

Offline skids

  • Posts: 949
Re: Latest TSO Product
« Reply #48 on: January 04, 2019, 10:19 AM »
good test Neilc...I think the very fact the rails move is what makes these TSO connectors more valuable..Every time you move them easier to square them back up with out additional straight edges.
The funniest thing about this particular signature is that by the time you realise it doesn't say anything it's to late to stop reading it