Author Topic: One for the Aussies...  (Read 274475 times)

0 Members and 1 Guest are viewing this topic.

Offline Kev

  • Posts: 7647
Re: One for the Aussies...
« Reply #660 on: April 25, 2016, 06:03 AM »
I'm on the path of a couple of jet fighters that always do a low, high speed flyover .. they don't seem to want me to forget when it's ANZAC day!!

anyway

Lest we forget ...

Offline Untidy Shop

  • Posts: 2562
Re: One for the Aussies...
« Reply #661 on: April 25, 2016, 09:39 AM »
I'm on the path of a couple of jet fighters that always do a low, high speed flyover .. they don't seem to want me to forget . . .


Yes @Kev, I know how that can be upsetting. During the Australian GrandPrix I was on the roof of the Melbourne House with paint and brush at hand when I was buzzed by the RAAF F18 commencing its low run in to Albert Park at the commencement of its display. Such a shock and paint everywhere!  [eek]  [big grin]
If you don't like Signatures, just go to Look and Layout and tick No Signatures.

“The test of the machine is the satisfaction it gives you. There isn't any other test. If the machine produces tranquility it's right. If it disturbs you it's wrong until either the machine or your mind is changed.”
― Robert M. Pirsig, Zen and the Art of Motorcycle Maintenance: An Inquiry Into Values

Offline Untidy Shop

  • Posts: 2562
Re: One for the Aussies...Festool or Facebook makes it hard
« Reply #662 on: April 27, 2016, 10:25 PM »
Let's see now; how can we make it just a little bit harder for our customers to enjoy our Facebook page!  [blink]  [eek]

Is this 'security check'  the work if Tooltechnic Aust., or Facebook?

« Last Edit: April 27, 2016, 10:32 PM by Untidy Shop »
If you don't like Signatures, just go to Look and Layout and tick No Signatures.

“The test of the machine is the satisfaction it gives you. There isn't any other test. If the machine produces tranquility it's right. If it disturbs you it's wrong until either the machine or your mind is changed.”
― Robert M. Pirsig, Zen and the Art of Motorcycle Maintenance: An Inquiry Into Values

Offline Kev

  • Posts: 7647
Re: One for the Aussies...Festool or Facebook makes it hard
« Reply #663 on: April 27, 2016, 11:16 PM »
Let's see now; how can we make it just a little bit harder for our customers to enjoy our Facebook page!  [blink]  [eek]

Is this 'security check'  the work if Tooltechnic Aust., or Facebook?

(Attachment Link)

@Untidy Shop what were you doing when you got that?

Offline Grakat

  • Posts: 208
Re: One for the Aussies...
« Reply #664 on: April 28, 2016, 03:53 AM »
Probably bagging out their price fixing arrangement while asking them when they are going to do any product demos in NSW.

Regards
Graham

Festool ETS150/3, TS55, CT26, DF500+ Domino set, PS300, HKC55

Offline Kev

  • Posts: 7647
Re: One for the Aussies...
« Reply #665 on: April 28, 2016, 04:10 AM »
Probably bagging out their price fixing arrangement while asking them when they are going to do any product demos in NSW.

@Grakat @Untidy Shop

Ironic you should say that - I just posted a question about Domino SV-SY S D14 [big grin] ... no extra security questions encountered either.

https://www.facebook.com/festoolaustralia

Offline Grakat

  • Posts: 208
Re: One for the Aussies...
« Reply #666 on: April 28, 2016, 07:41 AM »
But you are a preferred customer Kev. I'm guessing you have Valet parking, and they lend you a Sysrock when you go to the drive in movies.

The rest of us plebs get the security check lol
Regards
Graham

Festool ETS150/3, TS55, CT26, DF500+ Domino set, PS300, HKC55

Offline Kev

  • Posts: 7647
Re: One for the Aussies...
« Reply #667 on: April 28, 2016, 07:59 AM »
But you are a preferred customer Kev. I'm guessing you have Valet parking, and they lend you a Sysrock when you go to the drive in movies.

The rest of us plebs get the security check lol

@Grakat

I get so sick of those virgins throwing rose petals in from of my feet ... [big grin]

Offline Grakat

  • Posts: 208
Re: One for the Aussies...
« Reply #668 on: April 28, 2016, 08:26 PM »
@Kev

That's OK Kev I am sure you can serenade them with music from your Sysrock.  [big grin]
Regards
Graham

Festool ETS150/3, TS55, CT26, DF500+ Domino set, PS300, HKC55

Offline Untidy Shop

  • Posts: 2562
Re: One for the Aussies...
« Reply #669 on: April 29, 2016, 05:41 AM »
@Kev @Grakat

Well fellow Festoolians, of course conspiracy theories were running through my mind!  [big grin]

However I was using my IPad in a public library in Melbourne when I got that message. Had not got it in the same library any time before, so why now?  [smile] [eek]

Just arrived at home base and rechecked, all appears well for now?

I suppose the rose petals Kev, were Festool Green?
http://www.all-my-favourite-flower-names.com/green-roses.html

« Last Edit: April 29, 2016, 09:56 AM by Untidy Shop »
If you don't like Signatures, just go to Look and Layout and tick No Signatures.

“The test of the machine is the satisfaction it gives you. There isn't any other test. If the machine produces tranquility it's right. If it disturbs you it's wrong until either the machine or your mind is changed.”
― Robert M. Pirsig, Zen and the Art of Motorcycle Maintenance: An Inquiry Into Values

Offline Untidy Shop

  • Posts: 2562
Re: One for the Aussies..HK55 EQ240 News.
« Reply #670 on: April 29, 2016, 09:43 PM »
Well at times I have been critical here of Tooltechnics Aust.  [smile]

But today I want to congratulate them and especially Lauree in Marketing.

I have projects coming up that will be enhanced by an HK55 EQ240V; that is, the corded version. My dealers main Festool rep  last week did not know, "may be a year"! [eek]

So just now I sent a Message via Festool's Facebook and within 10 mins received the following reply -

Hi Stephen, the HK will be released in Australia but we are waiting for approval here is Australia and supply from Germany. It will be released the second half of this year. Kind regards Lauree (marketing executive Festool Australia)


Outstanding.  [smile] [smile]
« Last Edit: April 29, 2016, 09:50 PM by Untidy Shop »
If you don't like Signatures, just go to Look and Layout and tick No Signatures.

“The test of the machine is the satisfaction it gives you. There isn't any other test. If the machine produces tranquility it's right. If it disturbs you it's wrong until either the machine or your mind is changed.”
― Robert M. Pirsig, Zen and the Art of Motorcycle Maintenance: An Inquiry Into Values

Offline Kev

  • Posts: 7647
Re: One for the Aussies..HK55 EQ240 News.
« Reply #671 on: April 30, 2016, 03:16 AM »
Well at times I have been critical here of Tooltechnics Aust.  [smile]

But today I want to congratulate them and especially Lauree in Marketing.

I have projects coming up that will be enhanced by an HK55 EQ240V; that is, the corded version. My dealers main Festool rep  last week did not know, "may be a year"! [eek]

So just now I sent a Message via Festool's Facebook and within 10 mins received the following reply -

Hi Stephen, the HK will be released in Australia but we are waiting for approval here is Australia and supply from Germany. It will be released the second half of this year. Kind regards Lauree (marketing executive Festool Australia)


Outstanding.  [smile] [smile]
That's interesting .. I've asked two questions publicly ... one has been ignored and the other one has vanished [mad]

@Untidy Shop

Offline Untidy Shop

  • Posts: 2562
Re: One for the Aussies...
« Reply #672 on: April 30, 2016, 07:59 AM »
That's interesting .. I've asked two questions publicly ... one has been ignored and the other one has vanished [mad]
@Untidy Shop
@Kev

They do not seem to reply quickly to general Facebook posts. However, this time I went through Facebook using Messanger.

Open your Facebook a/c, link to Festool and open the Message Icon.


« Last Edit: April 30, 2016, 08:05 AM by Untidy Shop »
If you don't like Signatures, just go to Look and Layout and tick No Signatures.

“The test of the machine is the satisfaction it gives you. There isn't any other test. If the machine produces tranquility it's right. If it disturbs you it's wrong until either the machine or your mind is changed.”
― Robert M. Pirsig, Zen and the Art of Motorcycle Maintenance: An Inquiry Into Values

Offline Grakat

  • Posts: 208
Re: One for the Aussies...
« Reply #673 on: May 02, 2016, 08:59 PM »
Will they be bringing out the HK85 in a corded version. I could see a need for that if it was to become available in Australia.

Went to the local premium dealer on Sunday, their stocks seemed down. Didn't even have an RO150 on display  [embarassed] There were a few other items not on the shelf either.
Regards
Graham

Festool ETS150/3, TS55, CT26, DF500+ Domino set, PS300, HKC55

Offline Kev

  • Posts: 7647
Re: One for the Aussies...
« Reply #674 on: May 02, 2016, 09:33 PM »
Will they be bringing out the HK85 in a corded version. I could see a need for that if it was to become available in Australia.

Went to the local premium dealer on Sunday, their stocks seemed down. Didn't even have an RO150 on display  [embarassed] There were a few other items not on the shelf either.

@Grakat

It's a worry that!!

New Festool Australia "promo catalogue" .. apart from a bundle discount of $100 on a vac+machine and a few bonus giveaways, nothing new to rave about.

 

Offline thylaxene

  • Posts: 27
Re: One for the Aussies...
« Reply #675 on: May 02, 2016, 10:25 PM »
Not happy Jan. Bought a HKC 55 kit on Saturday having the rail bag as a bonus would have been nice! Emailed Festool AU... lets see what they say! [wink]

Cheers.

Offline Untidy Shop

  • Posts: 2562
Re: One for the Aussies...
« Reply #676 on: May 02, 2016, 11:28 PM »
@Kev @thylaxene @Grakat
Well having just downloaded this latest 'Promotion' Cat. I note -
. A$100 discount on DE/Tool packages does not generally equal the usual 10% and currently 15% discount offered in the US.
. Of the Tool Bonuses, the A$313 of blades with the Vecturo is good value, the bonuses with the BHC and Jigsaws are reasonable and the rest,  such as those with the EL65, are basically 'Fan' trinkets.
. Reasonable discounts on storage.

Overall I would rate a slight improvement over the last promotion. However probably some emphasis on slow moving stock such as the sander models featured. Would have liked batt. bonuses to continue.

AND
It would have been great if the current discount promotion being offered in the UK had been replicated here.

__________________
@Grakat

Why not ask them about the 85; see Reply # 673.  [smile]
« Last Edit: May 02, 2016, 11:46 PM by Untidy Shop »
If you don't like Signatures, just go to Look and Layout and tick No Signatures.

“The test of the machine is the satisfaction it gives you. There isn't any other test. If the machine produces tranquility it's right. If it disturbs you it's wrong until either the machine or your mind is changed.”
― Robert M. Pirsig, Zen and the Art of Motorcycle Maintenance: An Inquiry Into Values

Offline thylaxene

  • Posts: 27
Re: One for the Aussies...
« Reply #677 on: May 02, 2016, 11:35 PM »
Yeah the SDS bits with the BHC skin makes it very tempting.

Offline Locky

  • Festool Dealer
  • *
  • Posts: 148
Re: One for the Aussies...
« Reply #678 on: May 03, 2016, 01:44 AM »
They also have the conturo kit on sale which is a good deal, $923 off

Offline Kev

  • Posts: 7647
Re: One for the Aussies...
« Reply #679 on: May 03, 2016, 02:40 AM »
Yeah the SDS bits with the BHC skin makes it very tempting.
@Locky @Untidy Shop @thylaxene @Grakat

Yeh - got excited about that until I examined the detail ... They've "full priced" the Conturo as if you would buy the Conturo and the accessory kit as separate items. On a $10K+ purchase they're effectively offering a real 6.5% discount. Not enough for me to "impulse buy".

The possible real bargain is the VAC-SYS set with the bonus heads. That's more like a 21% discount. Curious whether the bonus heads come in the Conturo bundle (it's not mentioned) - it would change things if it did.

The VAC-SYS combo offered is confusing though ... if you buy 580070 (pump) and 580071 (vacuum clamping unit and foot release) for $1,890, you don't get the the hose ($150 worth that you do get in the $1,845 full kit 201655) ... so are you only really getting a $320 net benefit in the end? Why not also offer the bonus with the full kit 201655).  If they offered a bonus set of heads with each clamping unit, I'd buy a two head system right now!

Also curious about the version of the MFT/3 that really comes with the kit. Why the "non basic" version in this combo and why not ex the value of the standard MFT top?

The MFK700 discount isn't too bad ... $105 off of a $755 tool ... that's 14%, but that's the bottom machine ... why not offer 15% of all MFK models? ... if you get the MFK you WILL buy the fences and at that point you're back to square one.

Bundles need to be honest bundles and discounts need not to be teaser traps. Hopefully these are oversights, but examining the detail makes me underwhelmed .. at the very least you appear to be needing to buy a bracket for you vac head unit and a hose to make your Conturo bundle fully functional.

So to be totally transparent and not seem like I'm just having a dig ...

Quantity   Name   Unit price   Total price   
   KA 65 CONTURO Edge Bander Set KA 65 CONTURO Edge Bander Set Product no.: 574617   $5,225.00   $5,225.00   Remove Item(s)
   MFK 700 Basic Laminate Trimmer MFK 700 Basic Laminate Trimmer Product no.: 574457   $650.00   $650.00   Remove Item(s)
   8mm Router Cutter R1 x D28 x KL12.7 8mm Router Cutter R1 x D28 x KL12.7 Product no.: 499811   $244.00   $244.00   Remove Item(s)
   MFT 3 Basic Multifunction Table MFT 3 Basic Multifunction Table Product no.: 500608   $999.00   $999.00   Remove Item(s)
   Perforated Timber top for MFT 3 for use the KA 65 Edge Bander Perforated Timber top for MFT 3 for use the KA 65 Edge Bander Product no.: 500366   $240.00   $240.00   Remove Item(s)
   VAC SYS Compressed Air Pump Set VAC SYS Compressed Air Pump Set Product no.: 201655   $1,845.00 / set(s)   $1,845.00   Remove Item(s)
   Adaptor Plate for KA65 Edge Bander for MFT Table Adaptor Plate for KA65 Edge Bander for MFT Table Product no.: 500175   $545.00   $545.00   Remove Item(s)
Subtotal         $9,748.00

... above is a cut and past of a cart that has the correct combination of items to be cost optimal (basic MFT/3 and VAC-SYS combo set that does come with a hose)

This has all the parts, but pricing with the Conturo set ...

Quantity   Name   Unit price   Total price   
   KA 65 CONTURO Edge Bander Set KA 65 CONTURO Edge Bander Set Product no.: 574617   $5,225.00   $5,225.00   Remove Item(s)
   MFK 700 Basic Laminate Trimmer MFK 700 Basic Laminate Trimmer Product no.: 574457   $650.00   $650.00   Remove Item(s)
   8mm Router Cutter R1 x D28 x KL12.7 8mm Router Cutter R1 x D28 x KL12.7 Product no.: 499811   $244.00   $244.00   Remove Item(s)
   Perforated Timber top for MFT 3 for use the KA 65 Edge Bander Perforated Timber top for MFT 3 for use the KA 65 Edge Bander Product no.: 500366   $240.00   $240.00   Remove Item(s)
   Adaptor Plate for KA65 Edge Bander for MFT Table Adaptor Plate for KA65 Edge Bander for MFT Table Product no.: 500175   $545.00   $545.00   Remove Item(s)
   MFT 3 Large Multi-function Workbench MFT 3 Large Multi-function Workbench Product no.: 495315   $1,299.00   $1,299.00   Remove Item(s)
   VAC SYS Compressed Air Pump System VAC SYS Compressed Air Pump System Product no.: 580070   $975.00   $975.00   Remove Item(s)
   VAC SYS SE 1 - VACUUM UNIT VAC SYS SE 1 - VACUUM UNIT Product no.: 580061   $915.00   $915.00   Remove Item(s)
Subtotal         $10,093.00

This has the pricing of the Conturo and the accessory set unbundles ...

Quantity   Name   Unit price   Total price   
   MFK 700 Basic Laminate Trimmer MFK 700 Basic Laminate Trimmer Product no.: 574457   $650.00   $650.00   Remove Item(s)
   8mm Router Cutter R1 x D28 x KL12.7 8mm Router Cutter R1 x D28 x KL12.7 Product no.: 499811   $244.00   $244.00   Remove Item(s)
   Perforated Timber top for MFT 3 for use the KA 65 Edge Bander Perforated Timber top for MFT 3 for use the KA 65 Edge Bander Product no.: 500366   $240.00   $240.00   Remove Item(s)
   Adaptor Plate for KA65 Edge Bander for MFT Table Adaptor Plate for KA65 Edge Bander for MFT Table Product no.: 500175   $545.00   $545.00   Remove Item(s)
   MFT 3 Large Multi-function Workbench MFT 3 Large Multi-function Workbench Product no.: 495315   $1,299.00   $1,299.00   Remove Item(s)
   VAC SYS Compressed Air Pump System VAC SYS Compressed Air Pump System Product no.: 580070   $975.00   $975.00   Remove Item(s)
   VAC SYS SE 1 - VACUUM UNIT VAC SYS SE 1 - VACUUM UNIT Product no.: 580061   $915.00   $915.00   Remove Item(s)
   KA 65 CONTURO Edge Bander KA 65 CONTURO Edge Bander Product no.: 574610   $4,795.00   $4,795.00   Remove Item(s)
   KA 65 Edge Bander Trimmer Systainer Set KA 65 Edge Bander Trimmer Systainer Set Product no.: 500177   $650.00   $650.00   Remove Item(s)
Subtotal         $10,313.00

To get near the suggested saving it seems they must also be assessing the bundle on the full price version of the MFK700. Plus don't forget to buy an MFT mounting bracket for the vac clamping head an a hose to connect up you unit (494977 @ $365 and 495293 @ $150).


Offline Untidy Shop

  • Posts: 2562
Re: One for the Aussies...
« Reply #680 on: May 03, 2016, 02:40 AM »
They also have the conturo kit on sale which is a good deal, $923 off

Some time in the very near future at Northern Abrasives -
H  E  L  L  O       Kev.  [big grin]

Edit - A great joke, even if I do say so myself, slammed down by just 19 seconds difference in posting time.  [eek]


__________________

Interesting that these additional promotions are not part of the main promotion catalogue. If it was not for Locky and Kev, I would have missed it. Not that these items are on my future list though, but for some customers who are - ??!

@Locky @Kev




« Last Edit: May 03, 2016, 02:51 AM by Untidy Shop »
If you don't like Signatures, just go to Look and Layout and tick No Signatures.

“The test of the machine is the satisfaction it gives you. There isn't any other test. If the machine produces tranquility it's right. If it disturbs you it's wrong until either the machine or your mind is changed.”
― Robert M. Pirsig, Zen and the Art of Motorcycle Maintenance: An Inquiry Into Values

Offline Kev

  • Posts: 7647
Re: One for the Aussies...
« Reply #681 on: May 03, 2016, 02:55 AM »
They also have the conturo kit on sale which is a good deal, $923 off

Some time in the very near future at Northern Abrasives -
H  E  L  L  O       Kev.  [big grin]

Edit - A great joke, even if I do say so myself, slammed down by just 19 seconds difference in posting time.  [eek]


__________________

Interesting that these additional promotions are not part of the main promotion catalogue. If it was not for Locky and Kev, I would have missed it. Not that these items are on my future list though, but for some customers who are - ??!

@Locky @Kev

@Untidy Shop your radar is in perfect calibration - I was in there just two hours ago [big grin]

Offline ggc

  • Posts: 29
Re: One for the Aussies...
« Reply #682 on: May 03, 2016, 06:50 AM »
Good news on the Tanos front, I can make a pallet load order happen at a reasonable price.  Bad news is that I need to place an order this week to connect with the cheap shipping I have access to.  Other bad news (for me) is that the container lands in Melbourne instead of the Gold Coast, but I reckon a motorhome relocation holiday/roadtrip will fix that problem

Realistically that doesn't leave a lot of time to organise a group buy and collect money, but to get to a decent discount from Tanos it really needs to be a full pallet, and I just don't need that many systainers in my life. 
Sooo, if people send me a request via PM for what they want, I'll add it to the order until  i reach a pallet load.  No payment up front (there's still a chance I won't make the shipping cut-off), but you'll only have 2 weeks to pay (direct transfer or paypal) after it lands in Australia before I put it on ebay.

Pricing will be as per Tanos 2015 pricelist (tanos.de - service- downloads)except for the Tloc Sortainers and SYS-combis which are available on the tanos website or in the 2016 pricelist if you can find it.   
Further price reduction will be based on discount received from Tanos - 20% to cover customs/European transport/international money transfers/shrinkage/risk/stress etc. 
So if the order is big enough and I get a 30% discount from tanos, the price to the individual will be 10% (30%-20%) less than the tanos rrp* the exchange rate.  Based on current exchange rate, that means an empty SysIV would be around $82AUD. 

All shipping in Australia to be the responsibility of the purchaser, but it looks like I can arrange pickup in Melbourne or the Gold Coast.  Can also package up an order for pickup by courier.

also, it needs to fit in a systainer or maxi-sys to maximise the shipping volume, so no roll carts or tanos mobil

so this did actually happen, sat in Italy for far too long (cheap shipping always has a cost), but it's landed in Melbourne.

Offline ggc

  • Posts: 29
Re: One for the Aussies...
« Reply #683 on: May 03, 2016, 07:48 PM »
So I've got some spare systainers, and some where I haven't been able to contact the person who requested them.
If you're interested, it's car boot sale time.
I'll be in the Altona, Melbourne area 5-6 and maybe 7th of May, after that driving back to the Gold Coast with a  stopover around the Central coast.   Attachment shows the items I have remaining and the prices, part numbers are as per the Tanos catalogue.  Contact via PMs.

Offline Untidy Shop

  • Posts: 2562
Re: One for the Aussies... Veritas Demo Tour Down Under.
« Reply #684 on: May 05, 2016, 04:15 AM »
Veratas Demonstrations Down Under.

Vic Tesolin - Veritas expert and author of the ‘Minimalist Woodworker’ and Wally Wilson - Lee Valley senior manager, are visiting Australia for a two week all things Veritas demonstration tour.

Full details -
https://www.carbatec.com.au/veritas-tour-2016
If you don't like Signatures, just go to Look and Layout and tick No Signatures.

“The test of the machine is the satisfaction it gives you. There isn't any other test. If the machine produces tranquility it's right. If it disturbs you it's wrong until either the machine or your mind is changed.”
― Robert M. Pirsig, Zen and the Art of Motorcycle Maintenance: An Inquiry Into Values

Offline Grakat

  • Posts: 208
Re: One for the Aussies...
« Reply #685 on: May 05, 2016, 06:55 AM »
I think the theme of this promotion is that TTS have a lot of vacuum cleaners to shift. [big grin]

Seems you only get a discount if you buy a tool with the extractor. Even jigsaws, which don't really benefit from the extractor, get the treatment as well. The OF1400 is not on special, that is the normal list price.
Regards
Graham

Festool ETS150/3, TS55, CT26, DF500+ Domino set, PS300, HKC55

Offline Kev

  • Posts: 7647
Re: One for the Aussies...
« Reply #686 on: May 05, 2016, 07:54 AM »
I think the theme of this promotion is that TTS have a lot of vacuum cleaners to shift. [big grin]

Seems you only get a discount if you buy a tool with the extractor. Even jigsaws, which don't really benefit from the extractor, get the treatment as well. The OF1400 is not on special, that is the normal list price.

Every promotion I've waited to see if the OF2200 set would be discounted ...  [sad] never is - so tonight I bit the bullet. One of the few Festools I didn't have that I wanted.

It was Router Night at Northern Abrasives .. so it was time [wink]

I was borderline on the discounted MFK700, but the stupid OFK/MFK basic/set and accessories does my head in. Rod (owner of Northern Abrasives) had a great idea .. suggested they should sell the basic MFK and have an accessory set with ALL the different pieces like with the OF2200. I'd buy that!

On a slightly different note relating to @Untidy Shop mentioning the HK55, we could see the HK85 round the same time.

Offline Bohdan

  • Posts: 791
Re: One for the Aussies...
« Reply #687 on: May 05, 2016, 08:05 AM »

Every promotion I've waited to see if the OF2200 set would be discounted ...  [sad] never is - so tonight I bit the bullet. One of the few Festools I didn't have that I wanted.

About time you got your self a real router set.

Offline Kev

  • Posts: 7647
Re: One for the Aussies...
« Reply #688 on: May 05, 2016, 08:11 AM »

Every promotion I've waited to see if the OF2200 set would be discounted ...  [sad] never is - so tonight I bit the bullet. One of the few Festools I didn't have that I wanted.

About time you got your self a real router set.

Well .. I do have the daddy, mummy and baby set now [smile]

Offline Grakat

  • Posts: 208
Re: One for the Aussies...
« Reply #689 on: May 05, 2016, 09:07 PM »
@Kev looks like you are spoiled for choice over there at Northern Abrasives. We tend to struggle a bit more in the Wild Wild West. [big grin]

If the HK85 came our way I would be interested.  [big grin]
Regards
Graham

Festool ETS150/3, TS55, CT26, DF500+ Domino set, PS300, HKC55