I will have a look at them. I accept your point about working overhead with a sander as I have been doing this with an ETS150/3 so understand about the weight. I didn't know the cordless sanders could take AC power, that would make them more versatile.

In that instance I would probably target the delta or small orbital machine for doing trim work. The random orbit I would stay with my current corded offering.

Thanks for the response Peter.

Quote from: Grakat on July 30, 2017, 06:55 AM

Hope you all are keeping well.

@Kev the battery sanders aren't really on the radar for me. The selling point of Festool is supposed to be dust extraction via the CT range. They all require 230v. So it's a bit dumb to have a cordless sander that should be used with a corded CT.

Only a few more things to go and my needs will be largely met anyway.

Hi Graham

You may be missing the point with the cordless sanders. I must confess that I had wondered why have a cordless sander but I have completely changed my mind. Have you tried them yet?

They do give you complete freedom from the power cord and the vacuum hose. Dust collection is pretty good despite that. Imagine working overhead or certainly above shoulder height for extended periods - say when working on the house. The weight reduction by having no hose or power lead has an immediate effect and will reduce fatigue by quite a margin. I had to nip out to do a quick sanding job on a piece of furniture that I had made for someone and would have managed with just one of these but had to take a CT along as well.

You can connect them to an extractor and also have them powered from the mains which gives even greater flexibility.

There is no loss of performance due to them being a cordless tool. I tried them all recently in Germany and would recommend that everyone should try one or all three out before making a judgement.

Here is a clip, not available to the general public:



Peter

Anyone know a decent dealer in Melbourne they would be able to do me a deal?

Spoke to a few I've bought from before and some ruled it out.

I own a HKC55 and it's an absolute ripper, changed the way I do a lot of things.

It's prompted me to pull the trigger the the HK75.

I'm wanting to do a deal with a different size track, as I already have the 420, my preference would be the smaller one, as I have other tracks from my TS to use on sheet goods.

I may even buy 3 x 1050 tracks in the same order.

Hi there.

Just had a look. Sword saw is new, there's $100 off the OF1400 which is on my list. Otherwise will wait for the next offering.

I think TTS will be seeking to renew their price fixing arrangement soon. It's either Aug 17 or Aug 18.

Anyone know a decent dealer in Melbourne they would be able to do me a deal?

Spoke to a few I've bought from before and some ruled it out.

I own a HKC55 and it's an absolute ripper, changed the way I do a lot of things.

It's prompted me to pull the trigger the the HK75.

I'm wanting to do a deal with a different size track, as I already have the 420, my preference would be the smaller one, as I have other tracks from my TS to use on sheet goods.

I may even buy 3 x 1050 tracks in the same order.

Good luck with that. I work weekends at a dealer in Adelaide, there are no 'deals' to be done on festool pricing. Doesn't matter if you want 1 sander, or a saw extractor 3 rails and 2 routers in the one order, the price is the price. We aren't even allowed to take the 1400mm rail out of a ts pack and swap it for say the 1080mm or 1900mm rail and adjust the price accordingly as seems common in the USA. I recently put through a huge order for a customer that was in to the 5 figured mark on various tools. I had to put the festool stuff through on a separate invoice just incase festool thought I was offering a deal on their stuff by discounting the other stuff. Yes, they do periodically audit dealer invoices on their products!

Quote from: Kev on August 08, 2017, 09:42 AM

The fact that Festool Australia's pricing these days irritates the snot out of me is no secret. Can't believe they're saying $199 is a "special" price for the old sortainers ... and I bet everyone is rushing out to buy a $95 "Y" hose connector!

It's as if they've given up trying to offer a real promotion and these promotional brochures are just a "going through the motions" thing.

When you can fund a quick visit to Europe with the savings you could make on a handful of Festool items you really have to ask if the fear of no local warranty is enough to keep you buying locally.

@Kev For me it was a no brainer, I bought my domino 500 in the UK rather than in Aus and saved just under $700 Aus by doing so. This is a crazy price difference, more than the price of an ETS 150 sander in Aus.
 My domino was registered automatically by the UK tool shop at my parents house in the UK, so if it does go wrong I can ship it both ways back to the UK for less than $100, only down side I see is I could be without the tool for probably longer if It does need repairing but in saying that the last tool I sent back to Festool Australia for repair ended up taking a six weeks due to their total incompetence.

The incompetence is not total.
My vacuum got fixed.
(But it did arrive 3-4 weeks late as they shipped it to another state.)

My Domino 700 was ~$1000 less overseas. One does not need to be a rocket scientist to understand the cost.

In their defence they probably did not believe that they use power tools in SA with the power grid... 

In their defence they probably did not believe that they use power tools in SA with the power grid... 

They probably have to drive to VIC to charge them 

Hello All,

I can't remember which insurance company it was, but it had a green logo. There is a TV advert for business insurance where the featured business was a cabinetmaking/joinery business. For the keen of eye Festool was plugged quite heavily.

@Holmz

Yes that's the one.

Looks like the price fixing model has enabled TTS to design a new website. Still no new promo. It's only Xmas time, why would power tools not be on promo.

New website,
New HQ,
New prices.......coming soon,

<<comment deleted>> - Peter Halle Moderator

I have work for the RO150 and am hoping it comes up on promo. Call me a cheapskate but if its $100 off then that's money in my pocket. It and the OF1400 are the two items on the need to have list.

As a hobbyist I'm not losing money while I wait.

Don't hold your breath....

What about a second hand &/or private import purchase?  They're generally a very reliable tool, with serviceable parts easily replaced.  You could potentially save yourself a motzah, even including high postage costs.  A 220/240v machine originating from the UK or continental Europe can typically be picked up for around half the local new price.

@aloysius

Who do you deal though for this process. Would you be so kind as to share some details either here or by PM and I will look into it.

PM sent.

Hello All

Hope you all are well.

There's $100 off the RO 150. Combined with a gift card I got from work should make it a bit more palatable. Love it when my work subsidises my hobby. They did it big time on the Domino lol.