Having trouble with your Festool power tool? Well, we're here to help you. Before posting to the forum, give us a chance to diagnose and resolve your issue. In the U.S. and Canada, call us toll-free at 888-337-8600 on Monday-Friday between 8a-5p EST or contact us via email at service@festoolusa.com. For other countries, please visit http://www.festool.com for contact information for your local Festool service department.

Author Topic: 1010 Router mis-aligned  (Read 2503 times)

0 Members and 1 Guest are viewing this topic.

Offline yoda

  • Posts: 24
1010 Router mis-aligned
« on: January 12, 2012, 10:49 PM »
So I've been wondering for a while now why my left hand and right hand doors were always leaving a different reveal at the top. And I finally found the problem today as I was mortising out some hand pulls for pocket doors. The center of the collet is not centered on the collar. And yes I tried different collars and different bits. I guess I'm sending it in for service. Anyone else ever had this problem? Not only that, but I'm going to have to send in my kapex for the second time for the exact same issue as before (leaking grease out of the head and it won't move up on it's own). Frustrating.

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline Brice Burrell

  • Posts: 7350
  • Remodeling Contractor
    • The Green and Dark Blue blog
Re: 1010 Router mis-aligned
« Reply #1 on: January 12, 2012, 10:55 PM »
I'm not sure I understand exactly the problem, by collar do you mean copy ring/guide bushing?
Check out my new blog, The Green and Dark Blue Blog.

Offline yoda

  • Posts: 24
Re: 1010 Router mis-aligned
« Reply #2 on: January 12, 2012, 11:14 PM »
Collar, copy ring. Yes.

Offline festoolviking

  • Posts: 361
Re: 1010 Router mis-aligned
« Reply #3 on: January 13, 2012, 02:09 AM »
Hi!

Are you using the Centering mandrel 492187 ? That is a must for copying rings.

festoolviking
Festoolviking

Offline William Herrold

  • Posts: 448
  • "failure is imminent"
Re: 1010 Router mis-aligned
« Reply #4 on: January 13, 2012, 08:24 AM »
Hopefully in the future Festool will include the centering mandrel in the box with the router, as it is a necessary tool for mounting copy rings.
A quick fix, which I've used in the past, is to use a bit bit matching the inside diameter of the copy ring. Later, I obtained a centering mandrel in a bushing kit from Leigh.
I've had this issue , although slight, with my OF1400, and it IS frustrating to find out there is a centering issue after the damage is already done.

"I don't believe anything, but I have a lot of suspicions"
 R.A.W.

Offline yoda

  • Posts: 24
Re: 1010 Router mis-aligned
« Reply #5 on: January 13, 2012, 07:58 PM »
I actually found out about the centering mandrel right after I posted my problem. It's funny because I've used the porter cable router for years and never had to center my bits on the guides. It was just perfect out of the factory. It was not a plunge router though, could this be the difference?  I have a few of the metric template guides and these work fine with the mandrel. However for all my jigs I'm set up to use a 51/64" guide so I use the guide bushing adapter that came with the router. It's a plastic insert that has no play in it, so I cannot center the guide on the bit. Is there another option out there (where's my imperial template guides Festool!?) or do I have to make 50 new jigs?

Offline Dongar

  • Posts: 81
Re: 1010 Router mis-aligned
« Reply #6 on: January 14, 2012, 11:49 PM »
Leigh Jigs makes a guide bush adapter number 704R for the 1010 that can be centered with the centering mandrel.
Don