Having trouble with your Festool power tool? Well, we're here to help you. Before posting to the forum, give us a chance to diagnose and resolve your issue. In the U.S. and Canada, call us toll-free at 888-337-8600 on Monday-Friday between 8a-5p EST or contact us via email at service@festoolusa.com. For other countries, please visit http://www.festool.com for contact information for your local Festool service department.

Author Topic: Brand new guide rail crowned 1/8"  (Read 2330 times)

0 Members and 1 Guest are viewing this topic.

Offline Taos

  • Posts: 227
Brand new guide rail crowned 1/8"
« on: January 12, 2008, 09:16 PM »
Hi all,
I opened the box and immediately noticed a curve in the 1400/2  55" guide rail. I thought, no way. Yes it is. I taped a piece a black thread on one end and stretched it tight to the other end along the edge. I have a strong 1/8" crown in the middle. With the TS55 following along this I will continually cut curves. Wow.

Anybody experienced this? The box was not damaged and the crown is actually an extrusion issue and could never be bent this way.3661-0

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline bruegf

  • Posts: 794
  • Michigan
Re: Brand new guide rail crowned 1/8"
« Reply #1 on: January 12, 2008, 09:26 PM »
Time to call Festool and use that warranty!

Fred
Fred

Offline Taos

  • Posts: 227
Re: Brand new guide rail crowned 1/8"
« Reply #2 on: January 12, 2008, 11:59 PM »
Yea,
It's going back. Another discovery is that the blade wobbles badly. I removed it, checked for burrs, checked the arbor flanges for flatness (appear flat), rotated the blade 180 to try and cancel out the wobble, checked the blade itself (it is flat).

Must be the internal arbor itself but my dial indicator reads .037 out.

I'm returning the saw and guide rail and trying again.

Will update Monday or Tue. 1/14 - 1/15