Having trouble with your Festool power tool? Well, we're here to help you. Before posting to the forum, give us a chance to diagnose and resolve your issue. In the U.S. and Canada, call us toll-free at 888-337-8600 on Monday-Friday between 8a-5p EST or contact us via email at service@festoolusa.com. For other countries, please visit http://www.festool.com for contact information for your local Festool service department.

Author Topic: Broken Manual/Auto Switch on my ac 36 Dust Extractor  (Read 972 times)

0 Members and 1 Guest are viewing this topic.

Offline steve hinde

  • Posts: 1
Broken Manual/Auto Switch on my ac 36 Dust Extractor
« on: November 05, 2017, 01:20 AM »
Has any one broken the circular green switch that turns there dust extractor on-off? have you gotten a replacement and fixed your self?

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.

Offline Gregor

  • Posts: 1163
Re: Broken Manual/Auto Switch on my ac 36 Dust Extractor
« Reply #1 on: November 05, 2017, 02:09 AM »
Had that on one of mine (I got it used for a low price, already being in that state). According to feedback from festool service (who fixed it thanks to service all included) IIRC the seal around the switch shaft had failed, leading to water entering (as it had been either used outside or cleaned with a water hose), corroding the switch up to a standstill - they replaced the seals and the switch, wouldn't have been that expensive in case it would have been out of warranty (mine had a month left).
« Last Edit: November 05, 2017, 02:12 AM by Gregor »