Having trouble with your Festool power tool? Well, we're here to help you. Before posting to the forum, give us a chance to diagnose and resolve your issue. In the U.S. and Canada, call us toll-free at 888-337-8600 on Monday-Friday between 8a-5p EST or contact us via email at service@festoolusa.com. For other countries, please visit http://www.festool.com for contact information for your local Festool service department.

Author Topic: Conturo error code 9  (Read 583 times)

0 Members and 1 Guest are viewing this topic.

Offline Jonny

  • Posts: 1
Conturo error code 9
« on: March 19, 2019, 06:37 PM »
Hi all.

My Conturo has started to come up with error code 9 then shuts itself down,anyone know what this is?  it will be going back to Festool but I’m pretty sure it’s out of warranty now so was wondering how scared I should be of the repair bill!

Thanks

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline Chris161190

  • Posts: 36
Re: Conturo error code 9
« Reply #1 on: March 21, 2019, 04:01 PM »
We’ve just taken delivery of our conturo today, our local rep brought it in and advised us that a few machines were getting error codes and not running due to dust and debris getting into the fans inside the machine. Aparently there are three fans and if obstructed or blocked/ gunked up the fans will need replacing as they won’t operate and hence neither will the machine... I don’t know if this is specifically error code 9 but if you have no fan noise coming on when trying to turn it on I’d guess it’s that...

Our rep advised us to make sure the machine is kept clean and away from sanding and routing dust as much as possible. Basically stating that it’s a machine designed to glue edgings on and as a result shouldn’t really be in contact with that much dust and other contaminates. Obviously in the real world you can’t avoid it completely but I took note of what he said!

Chris.