Having trouble with your Festool power tool? Well, we're here to help you. Before posting to the forum, give us a chance to diagnose and resolve your issue. In the U.S. and Canada, call us toll-free at 888-337-8600 on Monday-Friday between 8a-5p EST or contact us via email at service@festoolusa.com. For other countries, please visit http://www.festool.com for contact information for your local Festool service department.

Author Topic: CT22E Defective Plastic  (Read 596 times)

0 Members and 1 Guest are viewing this topic.

Offline formerfest00!fan

  • Posts: 1
CT22E Defective Plastic
« on: December 03, 2018, 06:17 PM »
So, when setting my dust extractor down from the benchtop to the floor, to my surprise, the wheel pops off. To my even further surprise, when looking closer the entire corner of the vacuum is shattered, thus rendering the entire unit useless. Note, I did not drop it, just set it down. Temperature in the workshop was 50 degrees fahrenheit.

Just got off the phone with Festool, and was told, even though it's a defective plastic that has since been replaced on newer models, mine's out of warranty and I'm on my own. They have a replacement part made of the correctly engineered plastic, but expect me to pay $150.00 for the privilege of continuing to use their fine product. I think I'd rather go back to my Fein.

Question is, since this seems to be a rather common problem, and the defect is admitted by the manufacturer, does anyone know of a class action lawsuit or other remedy in the works, or be interested in joining one?

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Online Peter Halle

  • Global Moderator
  • *
  • Posts: 11596
Re: CT22E Defective Plastic
« Reply #1 on: December 03, 2018, 06:52 PM »
Sorry to hear about your issue.  Regarding your questions about class actions etc., none that I have heard about.

Peter

Offline Holzhacker

  • Posts: 898
    • www.aic-chicago.com
Re: CT22E Defective Plastic
« Reply #2 on: December 03, 2018, 07:51 PM »
This is one of those posts that always seems odd to me and makes me wonder if I'm not just a softy on my tools. Which I am not. My CT22 has spent years getting bashed around on jobsites and still rocks. I've replaced the wheels several times. Stopped replacing the hose garage after the 2nd one.
While festools answer doesn't sound ideal, i'd patch it up and keep working.
"The Code is not a ceiling to reach but a floor to work up from"

Offline SRSemenza

  • Global Moderator
  • *
  • Posts: 8640
  • Finger Lakes Region, NY State , USA
Re: CT22E Defective Plastic
« Reply #3 on: December 03, 2018, 09:16 PM »
There has been a problem with "newer" model (but not the very newest) CT hose garages breaking. But I don't recall seeing many reports of older CT22 or CT33 housings breaking. Is it the hose garage ,which you might not have on your vac depending on age, or the actual lower part of the housing (near the wheel)? 

Seth