Having trouble with your Festool power tool? Well, we're here to help you. Before posting to the forum, give us a chance to diagnose and resolve your issue. In the U.S. and Canada, call us toll-free at 888-337-8600 on Monday-Friday between 8a-5p EST or contact us via email at service@festoolusa.com. For other countries, please visit http://www.festool.com for contact information for your local Festool service department.

Author Topic: CT22E Vac - Replacing Thermal Sensor  (Read 1329 times)

0 Members and 1 Guest are viewing this topic.

Offline Lorin

  • Posts: 3
CT22E Vac - Replacing Thermal Sensor
« on: July 07, 2018, 02:25 PM »
Looking for how to instructions on replacing the Thermal Sensor Festool part # 452149


Mission Accomplished !!!
« Last Edit: July 08, 2018, 09:24 PM by Lorin »

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline Alex

  • Posts: 5699
Re: CT22E Vac - Replacing Thermal Sensor
« Reply #1 on: July 07, 2018, 02:49 PM »
Open the vac by removing the apropriate screws, locate the sensor, unplug it from the main board, replace, put the vac back together.

Offline Gregor

  • Posts: 986
Re: CT22E Vac - Replacing Thermal Sensor
« Reply #2 on: July 08, 2018, 06:14 AM »
This. Having a printout of the EKAT drawing at hand while at it will help to locate all screws.