Having trouble with your Festool power tool? Well, we're here to help you. Before posting to the forum, give us a chance to diagnose and resolve your issue. In the U.S. and Canada, call us toll-free at 888-337-8600 on Monday-Friday between 8a-5p EST or contact us via email at service@festoolusa.com. For other countries, please visit http://www.festool.com for contact information for your local Festool service department.

Author Topic: CTL Midi  (Read 634 times)

0 Members and 2 Guests are viewing this topic.

Offline AndyMan1

  • Posts: 6
CTL Midi
« on: September 20, 2018, 04:20 AM »
Hi all, new here to the FOG forum.

I have a CTL Midi with a Long Life bag.

Even though i have cleaned the Midi, Bag and Filter thoroughly i am finding that loads of dust and debris is sitting on top of the bag, in the filter and even in the base of the machine when i open up the Vac.

I am wondering whether i have a missing seal between the bag and internal port.

Any advice?
« Last Edit: September 20, 2018, 04:29 AM by AndyMan1 »

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline Alex

  • Posts: 5698
Re: CTL Midi
« Reply #1 on: September 20, 2018, 11:22 AM »
I never have this with my Mini. There is only one seal and it's in the bag itself, the white rubber ring around the hole in the paper top.

Just make sure it's properly seated.

Offline AndyMan1

  • Posts: 6
Re: CTL Midi
« Reply #2 on: September 20, 2018, 11:50 AM »
Thanks for the reply Alex, yes the top is seated properly every time, both side clips snap locked without force but the problem still exists.

Offline cblanton42

  • Posts: 85
Re: CTL Midi
« Reply #3 on: September 20, 2018, 01:03 PM »
Maybe your bag has a small tear in it somewhere, have you checked the bag itself?  I have a midi and have never had any dust outside the bag and in the bottom like you're getting but I'm using regular bags.  You might try a regular bag and see if that results in dust outside the bag too, if so, it would eliminate a problem with your long life bag and point to a problem with the connection to the bag.

Good luck!
CB 

Offline AndyMan1

  • Posts: 6
Re: CTL Midi
« Reply #4 on: September 21, 2018, 04:06 AM »
#cblanton42  Thats exactly what my thoughts were so i have ordered some Hepa Filter bags to see if this makes a difference.

Fingers crossed !

Offline AndyMan1

  • Posts: 6
Re: CTL Midi
« Reply #5 on: September 21, 2018, 12:08 PM »
Hi again all, sussed the problem and boy, do i feel dumb.
Turns out the long life bag has an additional white seal at the port opening which had somehow locked itself to the bag closure lid.

Everything is working as it should now but guys, thanks for the comments and help.
Ta.