Having trouble with your Festool power tool? Well, we're here to help you. Before posting to the forum, give us a chance to diagnose and resolve your issue. In the U.S. and Canada, call us toll-free at 888-337-8600 on Monday-Friday between 8a-5p EST or contact us via email at service@festoolusa.com. For other countries, please visit http://www.festool.com for contact information for your local Festool service department.

Author Topic: Does anyone have a vac with a hose garage intact?  (Read 12077 times)

0 Members and 1 Guest are viewing this topic.

Offline Lettusbee

  • Posts: 28
Re: Does anyone have a vac with a hose garage intact?
« Reply #30 on: March 18, 2017, 10:26 PM »
I purchased both a CT26 and a midi this last summer.  The CT26 was already broken when I opened the box.  It was of course replaced by the vendor.  But still.  Decades of experience in plastics manufacturing, and we have to put up with this?   It's just a little weird some of the idiosyncrasies we accept in pursuit of superior tools.

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline Laminator

  • Posts: 287
Re: Does anyone have a vac with a hose garage intact?
« Reply #31 on: March 18, 2017, 11:08 PM »
I recently had to repair the top of my oldest 26 where the work center rests on it. I lazily used it to push myself from my knees after changing the bag and it cracked about 8".  I used pl8 adhesive and filled the hollow channel completely.  It now feels solid as a polyurethane rock.

Offline jools

  • Posts: 256
Re: Does anyone have a vac with a hose garage intact?
« Reply #32 on: March 19, 2017, 02:53 AM »
My 3yo midi is missing bits and has a cracked corner. Treated no different to a cheap vac which is in pristine condition.
It's seems to happen in the cold more.
It started with one little sander

Offline scholar

  • Posts: 81
Re: Does anyone have a vac with a hose garage intact?
« Reply #33 on: March 19, 2017, 07:56 AM »
My CT26 is getting on a bit now and is all in one piece.  The only problem I have with that is the old style systainer catches and I really wish Festool would redesign the top with a T-Loc catch.

My CT Mini did suffer a small bit breaking off the corner of the hose guide on the "garage", but I replaced the whole top with the new T-Loc style, since when it has survived unscathed.

Cheers

« Last Edit: March 19, 2017, 09:30 AM by scholar »

Offline jools

  • Posts: 256
Re: Does anyone have a vac with a hose garage intact?
« Reply #34 on: March 19, 2017, 09:50 AM »
That's where my midi broke first and I have the older systainer latches style. Was it hard to change @scholar ?
It started with one little sander


Offline HarveyWildes

  • Posts: 525
Re: Does anyone have a vac with a hose garage intact?
« Reply #36 on: March 19, 2017, 10:44 AM »
I purchased both a CT26 and a midi this last summer.  The CT26 was already broken when I opened the box.  It was of course replaced by the vendor.  But still.  Decades of experience in plastics manufacturing, and we have to put up with this?   It's just a little weird some of the idiosyncrasies we accept in pursuit of superior tools.

I have a CT36 with an intact hose garage that came that way.  It is in a home shop, so doesn't get tradesman use, but it has survived the granddaughters, who clean my shop once a month or so for spending money.

For all of that, I actually do use the garage quite a bit when I'm in the shop.  I use it to stage whatever tool I'm using at the moment that requires dust collection.  Usually a systainer for the tool I'm using with the CT and another for consumables (dominos or sandpaper).

Offline Stan Tillinghast

  • Posts: 21
Re: Does anyone have a vac with a hose garage intact?
« Reply #37 on: April 20, 2017, 05:53 PM »
My old CT 33 still has its hose garage intact; the newer (and more used) CT 36 has a broken garage. Everyone wants to sell me a garage for the CT 33, but the design is different. I can't find a part number for the hose garage for the CT 36. I recall the garage was an accessory for the 33 but standard on the 36.
Does anyone have a US source and part number for the hose garage replacement for the CT 36?

Offline SRSemenza

  • Global Moderator
  • *
  • Posts: 7824
  • Finger Lakes Region, NY State , USA
Re: Does anyone have a vac with a hose garage intact?
« Reply #38 on: April 20, 2017, 07:33 PM »
My old CT 33 still has its hose garage intact; the newer (and more used) CT 36 has a broken garage. Everyone wants to sell me a garage for the CT 33, but the design is different. I can't find a part number for the hose garage for the CT 36. I recall the garage was an accessory for the 33 but standard on the 36.
Does anyone have a US source and part number for the hose garage replacement for the CT 36?

Looks like 496237 on the EKAT. Contact a dealer to order.

You can find parts diagrams on the Festool Spare Parts selection on the Festool Websites drop down in the top bar.

Seth

Offline Bob D.

  • Posts: 580
Re: Does anyone have a vac with a hose garage intact?
« Reply #39 on: April 20, 2017, 07:42 PM »
My CT36 is still in great shape after 6+ years but it rarely gets pulled out from under the outfeed table of my tablesaw.
-----
It's a table saw, do you know where your fingers are?

Offline PA floor guy

  • Posts: 284
Re: Does anyone have a vac with a hose garage intact?
« Reply #40 on: April 20, 2017, 07:42 PM »
I'm so glad to see this post. I have spoken with Shane and Tyler about it already. Tyler is gonna get this resolved with festool Directly.   THIS IS A HUGE ISSUE FOR ME!!!!!!!!!!
    Each day that goes by gets me more irritated, having 5 festool vacs.  All broken garages.     

Offline Brice Burrell

  • Posts: 7203
  • Remodeling Contractor
    • The Green and Dark Blue blog
Re: Does anyone have a vac with a hose garage intact?
« Reply #41 on: April 20, 2017, 08:46 PM »
I'm so glad to see this post. I have spoken with Shane and Tyler about it already. Tyler is gonna get this resolved with festool Directly.   THIS IS A HUGE ISSUE FOR ME!!!!!!!!!!
    Each day that goes by gets me more irritated, having 5 festool vacs.  All broken garages.   

I hope you mean Festool is going to fix the issue with the plastic, and not just your broken vacs.
Check out my new blog, The Green and Dark Blue Blog.

Offline Stan Tillinghast

  • Posts: 21
Re: Does anyone have a vac with a hose garage intact?
« Reply #42 on: April 20, 2017, 10:33 PM »
SRSemenza, thanks for checking on that part number 496237. Yes, EKAT does show that as the correct part for the CT 36. I was going by the images I see online for that part, which is the picture for the older hose garage as far as I can tell. I will check with the local dealer, thanks. Or maybe I won't and will wait until Festool makes an unbreakable hose garage.  [wink]