Having trouble with your Festool power tool? Well, we're here to help you. Before posting to the forum, give us a chance to diagnose and resolve your issue. In the U.S. and Canada, call us toll-free at 888-337-8600 on Monday-Friday between 8a-5p EST or contact us via email at service@festoolusa.com. For other countries, please visit http://www.festool.com for contact information for your local Festool service department.

Author Topic: ETS EC150/5 LED Not working  (Read 1861 times)

0 Members and 1 Guest are viewing this topic.

Offline coezoo

  • Posts: 6
ETS EC150/5 LED Not working
« on: January 11, 2017, 08:34 PM »
I just noticed after a couple months of operation that my LED light on the ETS has never lit up.  I've never seen it light up.  Have had it connected to a CT-26 the whole time.  Shouldn't it glow green when the sander is operating, and flash if the dust hose is removed while operating?  Am I doing something wrong or does the sander need servicing?  Thanks!

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.

Offline antss

  • Posts: 1453
Re: ETS EC150/5 LED Not working
« Reply #1 on: January 11, 2017, 10:03 PM »
Check your manual, but I think that only comes on if you have the no start/without hose connected feature enabled .

If enabled, the sander won't start with out a hose connected.  I don't use that feature, so I may have it backwards. 

Offline ddb

  • Posts: 17
Re: ETS EC150/5 LED Not working
« Reply #2 on: January 11, 2017, 11:50 PM »
Yes, I think you're right. The LED is only used when the feature to automatically stop when the hose detaches is enabled.

to enable it, check you're manual, there's some button holding sequence you'd have to go through