Having trouble with your Festool power tool? Well, we're here to help you. Before posting to the forum, give us a chance to diagnose and resolve your issue. In the U.S. and Canada, call us toll-free at 888-337-8600 on Monday-Friday between 8a-5p EST or contact us via email at service@festoolusa.com. For other countries, please visit http://www.festool.com for contact information for your local Festool service department.

Author Topic: TS75 in CMS : flimsy Festool trigger lock fails....  (Read 1347 times)

0 Members and 1 Guest are viewing this topic.

Offline matt17

  • Posts: 3
TS75 in CMS : flimsy Festool trigger lock fails....
« on: May 05, 2019, 06:14 AM »
Hello

I have a year old TS75 in a CMS table - it's brilliant, apart from the flimsy C shaped trigger lock (the original Festool part) which flexes under load, and thus doesn't always hold the trigger depressed - meaning the saw fails to start when requested.

I saw another thread where a user had made his own, more robust (wooden) replacement trigger lock. Has anyone else done this - or found another solution?

Matthew

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline jobsworth

  • Posts: 5670
  • Festool Baby.....
Re: TS75 in CMS : flimsy Festool trigger lock fails....
« Reply #1 on: May 05, 2019, 12:41 PM »
I made my own. Not because the plastic one was flimsy but because I wanted to save it as they are unavailable here in the NA (that I know of).

Its simple really, I use the scroll saw module for the CMS to cut it out.

Its no biggie, I used 1/4 ply. Ya know I might just make one out of 1/2 baltic birch ply. See how that works.

Offline Bainiet

  • Posts: 23
Re: TS75 in CMS : flimsy Festool trigger lock fails....
« Reply #2 on: May 08, 2019, 07:07 AM »
 8) Yeah, the plastic one is very thin.

 I used it as a template to scribe the contour on some scrap, rounded it over, drilled a hole and put some wire through it to fix it to the insert.

Same story for the "push stick".

If you're not up to making this yourself, you should maybe sell the CMS set...  [crying]
Why does the stockpile of white+green boxes grow? It started with just 1, now it's over 26...