Having trouble with your Festool power tool? Well, we're here to help you. Before posting to the forum, give us a chance to diagnose and resolve your issue. In the U.S. and Canada, call us toll-free at 888-337-8600 on Monday-Friday between 8a-5p EST or contact us via email at service@festoolusa.com. For other countries, please visit http://www.festool.com for contact information for your local Festool service department.

Author Topic: Festool sys roller  (Read 1610 times)

0 Members and 1 Guest are viewing this topic.

Offline sladedavid

  • Posts: 1
Festool sys roller
« on: June 13, 2018, 06:34 PM »
Hi all,
I own a festool roller and I lost the strap that holds all my boxes together.
I rang festool Uk and they quoted me £50 for a new strap!
Which I think is crazy considering I can get a new roller for under £100.
Has anyone any ideas as to what I could use.
Thanks
David

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline Dick Mahany

  • Posts: 366
Re: Festool sys roller
« Reply #1 on: June 13, 2018, 07:35 PM »
how about some nylon backstrap webbing like this

Offline Sparktrician

  • Posts: 3618
Re: Festool sys roller
« Reply #2 on: June 14, 2018, 07:59 AM »
how about some nylon backstrap webbing like this

That kit doesn't seem to have the sliding ends necessary to work with the SysRoll.   [sad]
- Willy -

 "Remember, a chip on the shoulder is a sure sign of wood higher up." - Brigham Young

Offline Bvps

  • Posts: 6
Re: Festool sys roller
« Reply #3 on: June 14, 2018, 12:29 PM »
Hi from Germany

The original price of the strap is round about 22.--€ plus shipping in Germany. You should try another dealer!

Offline Bvps

  • Posts: 6
Re: Festool sys roller
« Reply #4 on: June 14, 2018, 12:33 PM »

Offline neilc

  • Posts: 2498
Re: Festool sys roller
« Reply #5 on: June 14, 2018, 05:13 PM »
Could you not make some sliding end pieces from aluminum strap?  Or route some from wood that could  slide into the channels and attach the strapping to it with screws or staples?

Offline Peter_C

  • Posts: 661
Re: Festool sys roller
« Reply #6 on: June 15, 2018, 01:24 AM »
Personally I wish my strap was locked in place. If it were me, I would use some webbing and sew up a quick release buckle with a couple of footman loops on each outside end with screws and 1/4" nuts holding them in place in the t-track. If you can't sew webbing you can get plastic pieces that don't need to be sewn in.

Might have to modify my own on that thought...hmmm