Having trouble with your Festool power tool? Well, we're here to help you. Before posting to the forum, give us a chance to diagnose and resolve your issue. In the U.S. and Canada, call us toll-free at 888-337-8600 on Monday-Friday between 8a-5p EST or contact us via email at service@festoolusa.com. For other countries, please visit http://www.festool.com for contact information for your local Festool service department.

Author Topic: XL 700 Depth issues  (Read 1142 times)

0 Members and 1 Guest are viewing this topic.

Offline MunsonT45

  • Posts: 3
XL 700 Depth issues
« on: January 26, 2018, 07:02 PM »
I’m not sure if anyone has seen this before or not. Back in November I bought a 700 during the recon sale. I had to send it in for service in December. I received the unit back about 2 weeks ago, and while making test cuts, everything seemed to be working properly. I used it for real for the first time yesterday and all was going well until I test fit the last panel. I had it set to a depth of 25mm. When I dry fit the piece, it had only cut it to about 15mm. Since all the other pieces that day had gone perfect, I just assumed I had incorrectly set the depth, even though the machine was still set at 25mm. So I reset the machine to 25mm and recut all the dominoes on that piece...same result, only about 15mm. I moved all the stops around to make sure they were not interfering with the cut and still nothing. I ended up having to set the machine to 30mm to get a 25mm cut. I’m not sure what the heck was going on since I had made several dozen cuts that day that were perfect. Everything was confirmed right and appeared to be operating normally other than the depth of the last series of cuts. Suggestions?

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline Peter Halle

  • Global Moderator
  • *
  • Posts: 11496
  • Another Avatar Coming Soon
Re: XL 700 Depth issues
« Reply #1 on: January 26, 2018, 07:41 PM »
I would suggest that you check your cutter to make sure the tip hasn't broken off and then based on your obeservations contact Festool on Monday would be my suggestion.

Peter
« Last Edit: January 26, 2018, 07:44 PM by Peter Halle »