I use a shorter fence but that's where I set it in the euro style.
Thanks pal I spent some time fooling with it today. Talking to Tom he tightens this fence by, first tightening the micro adj,mthere the v groove knob and finally the lever for the back fence I call the hook.
So I checked the toe in of the fence everything was fine. But a while ago I fooled with the hook adj, so I took the fence apart and adj it got it sorted working smooth.
Ran se stock thigh a tad better but still unacceptable even with a panther blade. So I tried it with the angle stop that came with it as a fence , nope same thing. Put a longer extrusion on it like a American style fence , a little better. Fooled with the adj of the euro style fence moved it up and back in proportion to the rear of the blade. Got some improvement but not where I want it.
So I took the saw out f the module and checked to toe in. I felt it needed some adj. so I adj it.
I ran it on a guide rail, and it came out acceptable for using a panther blade. I reassembled the module and tried it. Came out better. Still got saw marks but not as bad as the ones I showed originally. But I thought hey it's a panther blade
so I'm happy for now the way things turned out.
Thanks everyone for your help.