Having trouble with your Festool power tool? Well, we're here to help you. Before posting to the forum, give us a chance to diagnose and resolve your issue. In the U.S. and Canada, call us toll-free at 888-337-8600 on Monday-Friday between 8a-5p EST or contact us via email at service@festoolusa.com. For other countries, please visit http://www.festool.com for contact information for your local Festool service department.

Author Topic: How to un-warp MFT table top?  (Read 1173 times)

0 Members and 1 Guest are viewing this topic.

Offline Ross 71

  • Posts: 49
How to un-warp MFT table top?
« on: February 16, 2018, 08:20 PM »
Well I guess the title tells the story. I thought I'd stored my MFT in the dry, but the damp has got to it. There's a 1/4" hump across the middle of the tabletop. What can I do? And also, what should I have done to prevent this. Sealer coat, maybe?
This winter has been wet and wet, the air is very damp, but that's England for you, so how can I stop this happening again.
If you need a tool and don't buy it, You will ultimately find that you have paid for it but don't have it- Henry Ford

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline duc996

  • Posts: 125
Re: How to un-warp MFT table top?
« Reply #1 on: February 16, 2018, 08:25 PM »
If it’s only a 1/4” hump then I would just sand it flat. I actually sprayed oil base polyurethane on mine and it has been great. I also have my MFT placed in my garage. HTH.

Online neilc

  • Posts: 2396
Re: How to un-warp MFT table top?
« Reply #2 on: February 16, 2018, 09:33 PM »
You might reverse the top and make some braces under the bottom to bring it back to level if you can spring the top.  At 3/4" it might give you the flex you need.  But given you have holes across the table, you should be able to glue a board between a row of holes underneath as an option and clamp it down while the glue sets.

Alternatively, buy a piece of lightweight MDF and a 20mm bit and copy that top to a replacement.