Having trouble with your Festool power tool? Well, we're here to help you. Before posting to the forum, give us a chance to diagnose and resolve your issue. In the U.S. and Canada, call us toll-free at 888-337-8600 on Monday-Friday between 8a-5p EST or contact us via email at service@festoolusa.com. For other countries, please visit http://www.festool.com for contact information for your local Festool service department.

Author Topic: Lubricating the Kapex  (Read 447 times)

0 Members and 1 Guest are viewing this topic.

Offline Birdhunter

  • Posts: 2516
  • Woodworker, Sportsman, Retired
Lubricating the Kapex
« on: April 30, 2019, 04:45 AM »
I’ve happily used my Kapex 120 for years. Lately, it has gotten more difficult to rotate the base. Yes, I do fully depress the rotation lever while turning the base. I also thoroughly vacuum the exterior of the Kapex before quitting in the evening. The Kapex gets light use and is treated gently while in use.

Is there a way to lubricate the rotational bearings? I’ve looked on YouTube with no luck.
Birdhunter

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline Jiggy Joiner

  • Posts: 298
Re: Lubricating the Kapex
« Reply #1 on: April 30, 2019, 06:54 AM »
I have read and heard similar in the past, and loosening the pivot nut slightly seems to sort it.
Apparently there is a conical washer under the nut, that can stiffen the movement up over time?
I have had other saws in the past that tightened up, I had to remove the fence, the pivot nut etc, then clean and lubricate, re torque the pivot nut, or count the turns when removing.
For many Kapex owners though, just slightly loosening the nut is enough.