Having trouble with your Festool power tool? Well, we're here to help you. Before posting to the forum, give us a chance to diagnose and resolve your issue. In the U.S. and Canada, call us toll-free at 888-337-8600 on Monday-Friday between 8a-5p EST or contact us via email at service@festoolusa.com. For other countries, please visit http://www.festool.com for contact information for your local Festool service department.

Author Topic: RO90 Has Stopped Working  (Read 1759 times)

0 Members and 1 Guest are viewing this topic.

Offline DoWooder

  • Posts: 6
RO90 Has Stopped Working
« on: December 18, 2017, 03:30 AM »
Hi All

My RO90 Sander has stopped working.  It hasn't had any issues in the past.  I used it about 2 weeks ago.  When I came to turn it on yestersday it's just dead.  No life at all.  Tried different plugits and different wall outlets.  Nothing.

It's outside warranty.  Is there anything I can check myself before I send it back to Festool for repair?

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.

Offline Bert Vanderveen

  • Posts: 496
Re: RO90 Has Stopped Working
« Reply #1 on: December 18, 2017, 07:03 AM »
Check the brushes (my first supposition).
Cheers, Bert Vanderveen

TS55 · TS55R · OF1010 · DF500 Mk2 · MFT/3 + TSB1-MW 1000 + VL + CMS TS55 + CMS PS300 + LA-CS 70/CMS · CTL Midi · RTS400 EQ · 2 x CXS Li 1,5 · T15+3 Li 4,2 · TI15 Impact Li 4,2 · Centrotec Sets 2008 + 2015 · PSB300 · LR32-SYS · RO150 · Kapex KS120 · 2 x MFK700 · RO90 · OFK700 · BS75 · OFK500 · OF2200 · CMS-GE … | Mirka 1230L P&C | Hammer A3 31 Silent Power · Hammer N4400 

Offline Alex

  • Posts: 5846
Re: RO90 Has Stopped Working
« Reply #2 on: December 18, 2017, 07:09 AM »
Since you have already tried a different Plug-it cable, I would have a look at the brushes, they might be worn.

I owned this sander but I never opened it up, I guess you can access them through the removeable panel on the back of the sander.

If it's just the brushes you can order new ones and install them yourself.

A thing you should also look at is the plug-it cable and the socket on the tool, to see if there are no burn marks there. Sometimes, if the plug is not seated properly, you can get arcing there which destroys both the plug-it cord and the socket. If this happens you need to replace both.

Beyond that, it might be the electronics circuit or the field coil, and those are more advanced and expensive repairs which Festool should do.

« Last Edit: December 18, 2017, 10:23 AM by Alex »

Online SoonerFan

  • Posts: 434
Re: RO90 Has Stopped Working
« Reply #3 on: January 01, 2018, 03:49 PM »
I agree with @Alex, if beyond brushes just send it in.  At least for me, the other likely issues are beyond my skill to repair myself.