Having trouble with your Festool power tool? Well, we're here to help you. Before posting to the forum, give us a chance to diagnose and resolve your issue. In the U.S. and Canada, call us toll-free at 888-337-8600 on Monday-Friday between 8a-5p EST or contact us via email at service@festoolusa.com. For other countries, please visit http://www.festool.com for contact information for your local Festool service department.

Author Topic: LS130 Leaking Oil  (Read 1640 times)

0 Members and 1 Guest are viewing this topic.

Offline jbasen

  • Posts: 737
LS130 Leaking Oil
« on: August 16, 2017, 11:46 AM »
I bought an LS130 a while back knowing that I wouldn't use it very often but, at the same time, knowing that when I did need it, it would be very useful. 

It has been sitting in its systainer for a number of months and when I went to use it this morning I found it sitting in a puddle of oil.  After cleaning up the oil the sander seems to work OK but needless to say, I'm concerned.


Thanks in advance for the help

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.

Offline Brice Burrell

  • Posts: 7351
  • Remodeling Contractor
    • The Green and Dark Blue blog
Re: LS130 Leaking Oil
« Reply #1 on: August 16, 2017, 11:56 AM »
There's likely no oil in the sander, its probably the grease separating.  This happens with other tools too and you shouldn't have any trouble.  If you really want you can call Festool service and see what they say. 
Check out my new blog, The Green and Dark Blue Blog.

Offline jbasen

  • Posts: 737
Re: LS130 Leaking Oil
« Reply #2 on: August 16, 2017, 11:57 AM »

Offline Rip Van Winkle

  • Posts: 301
Re: LS130 Leaking Oil
« Reply #3 on: August 28, 2017, 06:28 AM »
I have an LS130 that may go back to 2006 judging from the label. I don't use it frequently, but I've never have grease ir oil leak out from it.

Offline jbasen

  • Posts: 737
Re: LS130 Leaking Oil
« Reply #4 on: August 28, 2017, 10:08 AM »
Thanks @Rip Van Winkle.  Given that I think I'll give service a call and see what they say.