Having trouble with your Festool power tool? Well, we're here to help you. Before posting to the forum, give us a chance to diagnose and resolve your issue. In the U.S. and Canada, call us toll-free at 888-337-8600 on Monday-Friday between 8a-5p EST or contact us via email at service@festoolusa.com. For other countries, please visit http://www.festool.com for contact information for your local Festool service department.

Author Topic: T18 not fitting systainer with battery bumper fitted  (Read 2478 times)

0 Members and 1 Guest are viewing this topic.

Offline Mrdisin

  • Posts: 1
T18 not fitting systainer with battery bumper fitted
« on: June 12, 2016, 04:16 AM »
Just bought a basic T18 and all was going well until i tried to shut the systainer lid after fitting one of my batteries to the drill, it didnt fit!  After a bit of cursing I worked out that if i removed the protective frames from the battery it would fit.
These protectors came included with all my other battery kits and it will be a pain to remove them every time i put the drill away.
Anyone else have this problem?

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline Dangermouse

  • Posts: 119
Re: T18 not fitting systainer with battery bumper fitted
« Reply #1 on: June 23, 2016, 06:39 PM »
the spare battery in a C18 case won't fit with the battery bumper either

Offline skids

  • Posts: 931
Re: T18 not fitting systainer with battery bumper fitted
« Reply #2 on: April 02, 2017, 05:07 PM »
Yep I have the same issue..Crappy design by Festool on this one. I got it to work by modifying the part of the systainer that was hitting the bumper and by pushing really hard on the drill while it was seated in the insert. after doing that I was able to get it to seat enough that I can close the systainer relatively easily. Still no perfect since you have to put a bit of pressure on the lid to get it engage the lock.
The funniest thing about this particular signature is that by the time you realise it doesn't say anything it's to late to stop reading it