Having trouble with your Festool power tool? Well, we're here to help you. Before posting to the forum, give us a chance to diagnose and resolve your issue. In the U.S. and Canada, call us toll-free at 888-337-8600 on Monday-Friday between 8a-5p EST or contact us via email at service@festoolusa.com. For other countries, please visit http://www.festool.com for contact information for your local Festool service department.

Author Topic: TS-55 REBQ Won’t Plunge  (Read 602 times)

0 Members and 1 Guest are viewing this topic.

TS-55 REBQ Won’t Plunge
« on: September 18, 2018, 03:37 PM »
Forgive me if this has been covered. Search didn’t return any results.

I have a relatively new track saw and went to use it today and the trigger and release button are locked in place. The plunge mechanism and start button can’t be engaged at all. The roving knife is also partially out and will not click back into the body. The blade lock also won’t full engage so the blade clicks as it turns but won’t lock so it can be removed.

Am I missing something or does this guy need to go in for service?

Thanks

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline Dick Mahany

  • Posts: 396
Re: TS-55 REBQ Won’t Plunge
« Reply #1 on: September 18, 2018, 04:03 PM »
You could remove the blade cover easily (5 screws) and look visually to see if there is something jammed possibly in the riving knife retraction mechanism.  It seems odd that the riving knife is only partially retracted. You could also use a wood block to keep the blade from rotating once the cover is off to remove it for further inspection.  Might be worth a try. 

Take care not to loose the small spring that is on the anti splinter window up front as they can sometimes fall out when the blade cover is removed.

Offline Gregor

  • Posts: 1075
Re: TS-55 REBQ Won’t Plunge
« Reply #2 on: September 19, 2018, 06:11 PM »
Operate the blade change lever once (the one to lock the blade half-out so you can change it), should do the trick.

If that dosn't do it: if under 3 years old send it in to get it fixed by Service all Included (=free).