Author Topic: 1400 Router Pros and Cons  (Read 22718 times)

0 Members and 1 Guest are viewing this topic.

Offline Steven Owen

  • Posts: 239
Re: 1400 Router Pros and Cons
« Reply #60 on: November 10, 2017, 01:18 PM »
I have narrowed my choice of routers to 3 Routers, P. C. 892, P. C. 7518, or Triton 2-1/4 H.P, any suggestions to help narrow my choices.

Router Table 1st choice, Incra Wonder Fence With Positioner with Incra Lift, I like JessEm however it appears from reviews Customer Service is not a strong point after the sale.

Thanks

PC 7518 would be my choice for a router that will remain mounted in a router table.
He is looking for 230V though or yeah i agree the PC has proven itself for years, though I prefer my Milwaukee in the table over it.

I thought the 7519 was single speed not making it ideal for a router table.  People make an argument against the Milwaukee that it cannot quickly change collets.  Granted, it’s not a great idea to use anything less than 1/2 inch bits on a 3.5 HP router.

I’m surprised there isn’t a 230v version the the variable speed 7518.

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline Holmz

  • Posts: 3969
Re: 1400 Router Pros and Cons
« Reply #61 on: November 12, 2017, 01:08 AM »

...

Why would anyone waste a pricey Mafell on a router table?   It would be cheaper to put a powerful motor in a lift and put the Mafell to use on challenging free tasks where it really shines.

Do you missed the numerous posts about the PC or the Trition as being good choices for a table?

Sometimes it is not about cost, but other factors.
...
Luckily most of my current needs are satisfied with the 8-mm bits. But I have some doors coming up, and this thread parallels the same chin scratchings.

It wasn’t meant as an insult.  I was doing the math in my head for price of a Mafell or OF 2200 and a solid router table, you’re coming pretty close to the price of a decent quality Shaper.

Wasn't taken as an insult...
I do not have room for a shaper and router.
I do not know much about shapers, but I made some door with a router once, and getting a monster router seems to make sense... but as you pointed out, maybe it does not.

Offline Steven Owen

  • Posts: 239
Re: 1400 Router Pros and Cons
« Reply #62 on: November 12, 2017, 03:19 AM »

...

Why would anyone waste a pricey Mafell on a router table?   It would be cheaper to put a powerful motor in a lift and put the Mafell to use on challenging free tasks where it really shines.

Do you missed the numerous posts about the PC or the Trition as being good choices for a table?

Sometimes it is not about cost, but other factors.
...
Luckily most of my current needs are satisfied with the 8-mm bits. But I have some doors coming up, and this thread parallels the same chin scratchings.

It wasn’t meant as an insult.  I was doing the math in my head for price of a Mafell or OF 2200 and a solid router table, you’re coming pretty close to the price of a decent quality Shaper.

Wasn't taken as an insult...
I do not have room for a shaper and router.
I do not know much about shapers, but I made some door with a router once, and getting a monster router seems to make sense... but as you pointed out, maybe it does not.

It would always come down to how you’re using the router.  If you’re pushing through extremely hard exotics it may make sense to use the Mafell in the table.

We have a smaller variety of exotics available in Canada because some exotics can’t handle our climate or and some exotics simply cost too much to sell in our market.  A Milwaukee 5625 mounted in a router lift can handle any of he wood types readily available in Canada.  A 5625 and Incra mount cost about $850 Canadian.  That’s hardly a budget solution.
« Last Edit: November 12, 2017, 03:46 PM by Steven Owen »

Offline Holmz

  • Posts: 3969
Re: 1400 Router Pros and Cons
« Reply #63 on: November 12, 2017, 06:17 AM »
You also have 110v and +1 as the country code... which means that a PC is also an option.

Offline Steven Owen

  • Posts: 239
Re: 1400 Router Pros and Cons
« Reply #64 on: November 12, 2017, 03:49 PM »
You also have 110v and +1 as the country code... which means that a PC is also an option.

I don’t like the newer PC’s that have been rolling off the assembly line in recent years.  Stanley has been on a cost cutting spree trying to get more PC tools into Lowes and Home Depot stores.  The PC bearings are very low quality.