Author Topic: Another chance to win tools, your choice of CXS or SysLite!  (Read 6396 times)

0 Members and 1 Guest are viewing this topic.

Offline Festool USA

  • Festool USA Employee
    FOG Administrator
  • *
  • Posts: 8373
    • Festool USA
Another chance to win tools, your choice of CXS or SysLite!
« on: December 13, 2012, 09:52 PM »
Ok, this really is the season of giving here at Festool USA. Head over to our website and write a testimonial, or what we call a "Festimonial", for your chance to win. We'll be randomly selecting five winners who will have their choice of a CXS (non-set) or SysLite.

http://www.festoolusa.com/festimonials-2013


U.S. and Canada only, excluding Quebec. Deadline for entry is 1/15/13. See website for complete details. Good luck!

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline Bikeboy80

  • Posts: 467
    • Drumm Design Remodel
Re: Another chance to win tools, your choice of CXS or SysLite!
« Reply #1 on: December 13, 2012, 10:14 PM »
Completed one last night  [smile]
The Green Koolaid sure is sweet...

Kapex w/crown stops, Domino DF 500 Set, Syslites, PS300, RTS400, RO150, OF1010 w/LR32 Kit, TS75, 75" + (2) 55" rails, RO90, ETS125, RAS, Custom abrasive systainer, CTmini, CT36AC w/blastgates, PLANEX w/harness, TI15, T12+3 set, MFT/3 cross cut, Universal Cleaning set, Turbo Suction Brush, 12 drawer Sortainer, Extra Systainers with job specific tool collections

Drumm Design Remodel

Offline neilc

  • Posts: 2474
Re: Another chance to win tools, your choice of CXS or SysLite!
« Reply #2 on: December 13, 2012, 10:17 PM »
Done!

Offline ScotF

  • Posts: 2473
Re: Another chance to win tools, your choice of CXS or SysLite!
« Reply #3 on: December 14, 2012, 12:50 AM »
I finished mine!  I am bound to win one of these contests eventually!

Scot

Offline Festool USA

  • Festool USA Employee
    FOG Administrator
  • *
  • Posts: 8373
    • Festool USA
Re: Another chance to win tools, your choice of CXS or SysLite!
« Reply #4 on: December 14, 2012, 01:06 AM »
Just a tip in case anyone missed it... You can enter more than once. You're able to submit a testimonial for each tool you own.  [wink]

Offline Steve Rowe

  • Posts: 828
  • Teach them safety when they are young.
Re: Another chance to win tools, your choice of CXS or SysLite!
« Reply #5 on: December 14, 2012, 11:16 AM »
Thanks Shane and Festool.  I submitted two entries.  While I could submit many more, I limited it to the two that have most improved my shop life; the RO-150E / CT-22E combo and the Domino.

Offline Kevin D.

  • Posts: 899
Re: Another chance to win tools, your choice of CXS or SysLite!
« Reply #6 on: December 14, 2012, 02:09 PM »
What if I have a CT22 for a dust extractor only.  The contest tool list only lists the newer models of CT's.  Would it be disqualified if I toggled a review of my CT22 but toggled the CT26 for it instead Shane?
Kapex, CT-SYS, SYS-Cart, Pro 5 Sander, CT36AC, TS75, MFT 1080, MF-SYS/2, PS300 EQ-Plus, Parallel Guides Set, LR32 SYS, RO 150FEQ-Plus, OF1400 EQ Plus, DOMINO 500 Q-Plus,  Domino XL, MFK 700 EQ-Set, FS-SYS/2, CT22 w/hose storage, D36HW-RS-Plus, FS 1900/2, FS 3000/2, FS 1080/2-LR32, FS 1400/2-LR32, Gecko, Festool Floor Mat, Festool Stein, Multi-Tool, tape measure, large and small Festool floor mats (foam rubber).

Offline Festool USA

  • Festool USA Employee
    FOG Administrator
  • *
  • Posts: 8373
    • Festool USA
Re: Another chance to win tools, your choice of CXS or SysLite!
« Reply #7 on: December 14, 2012, 03:26 PM »
What if I have a CT22 for a dust extractor only.  The contest tool list only lists the newer models of CT's.  Would it be disqualified if I toggled a review of my CT22 but toggled the CT26 for it instead Shane?

Kevin, the first option is unlisted or other.   [wink]

You won't be disqualified for choosing the wrong tool from the list. It just makes it easier for us to filter them.

Thanks.

Offline jacko9

  • Posts: 2349
Re: Another chance to win tools, your choice of CXS or SysLite!
« Reply #8 on: December 14, 2012, 06:34 PM »
Just a tip in case anyone missed it... You can enter more than once. You're able to submit a testimonial for each tool you own.  [wink]

Wow, that means I can submit 9 entries, that stack of Systaniers keeps getting higher!

Jack

Offline Kevin D.

  • Posts: 899
Re: Another chance to win tools, your choice of CXS or SysLite!
« Reply #9 on: December 14, 2012, 10:29 PM »
What if I have a CT22 for a dust extractor only.  The contest tool list only lists the newer models of CT's.  Would it be disqualified if I toggled a review of my CT22 but toggled the CT26 for it instead Shane?

Kevin, the first option is unlisted or other.   [wink]

You won't be disqualified for choosing the wrong tool from the list. It just makes it easier for us to filter them.

Thanks.

Thanks Shane.  Completely missed the "Other" category.  My bad!
Kapex, CT-SYS, SYS-Cart, Pro 5 Sander, CT36AC, TS75, MFT 1080, MF-SYS/2, PS300 EQ-Plus, Parallel Guides Set, LR32 SYS, RO 150FEQ-Plus, OF1400 EQ Plus, DOMINO 500 Q-Plus,  Domino XL, MFK 700 EQ-Set, FS-SYS/2, CT22 w/hose storage, D36HW-RS-Plus, FS 1900/2, FS 3000/2, FS 1080/2-LR32, FS 1400/2-LR32, Gecko, Festool Floor Mat, Festool Stein, Multi-Tool, tape measure, large and small Festool floor mats (foam rubber).

Offline Kevin D.

  • Posts: 899
Re: Another chance to win tools, your choice of CXS or SysLite!
« Reply #10 on: December 20, 2012, 08:57 PM »
Just got an email this afternoon from the VP of marketing at Festool USA asking to use one of my testimonials in an upcoming catalogue which of course I agreed to in exchange for a comp T-Shirt.  So I guess they do really use these entries for something.
Kapex, CT-SYS, SYS-Cart, Pro 5 Sander, CT36AC, TS75, MFT 1080, MF-SYS/2, PS300 EQ-Plus, Parallel Guides Set, LR32 SYS, RO 150FEQ-Plus, OF1400 EQ Plus, DOMINO 500 Q-Plus,  Domino XL, MFK 700 EQ-Set, FS-SYS/2, CT22 w/hose storage, D36HW-RS-Plus, FS 1900/2, FS 3000/2, FS 1080/2-LR32, FS 1400/2-LR32, Gecko, Festool Floor Mat, Festool Stein, Multi-Tool, tape measure, large and small Festool floor mats (foam rubber).

Offline Festool USA

  • Festool USA Employee
    FOG Administrator
  • *
  • Posts: 8373
    • Festool USA
Re: Another chance to win tools, your choice of CXS or SysLite!
« Reply #11 on: January 15, 2013, 08:38 AM »
Ok, this really is the season of giving here at Festool USA. Head over to our website and write a testimonial, or what we call a "Festimonial", for your chance to win. We'll be randomly selecting five winners who will have their choice of a CXS (non-set) or SysLite.

http://www.festoolusa.com/festimonials-2013


U.S. and Canada only, excluding Quebec. Deadline for entry is 1/15/13. See website for complete details. Good luck!

Just a friendly reminder. Today's the last day to get your testimonial in for a chance to win. Good luck to everyone!

Offline builderbob

  • Posts: 1361
    • RJP Remodeling
Re: Another chance to win tools, your choice of CXS or SysLite!
« Reply #12 on: January 15, 2013, 08:41 AM »
I need to submit mine still. What time today does this close?  Thx

Bob
Kapex, TS55, CMS GE, Carvex 420, Domino DF500, MFK 700, OF 2200, OF 1400, OF 1010, EHL65, RAS 115, RTS 400, RO150, ETS 150/3, ETS 125, CT 22 (2), CXS (2), C-15+3, T-12+3, PSB 300 & more MFT's than i can count!

Offline Bikeboy80

  • Posts: 467
    • Drumm Design Remodel
Re: Another chance to win tools, your choice of CXS or SysLite!
« Reply #13 on: January 17, 2013, 03:12 PM »
Any word on the winners? [tongue]
The Green Koolaid sure is sweet...

Kapex w/crown stops, Domino DF 500 Set, Syslites, PS300, RTS400, RO150, OF1010 w/LR32 Kit, TS75, 75" + (2) 55" rails, RO90, ETS125, RAS, Custom abrasive systainer, CTmini, CT36AC w/blastgates, PLANEX w/harness, TI15, T12+3 set, MFT/3 cross cut, Universal Cleaning set, Turbo Suction Brush, 12 drawer Sortainer, Extra Systainers with job specific tool collections

Drumm Design Remodel

Offline Festool USA

  • Festool USA Employee
    FOG Administrator
  • *
  • Posts: 8373
    • Festool USA
Re: Another chance to win tools, your choice of CXS or SysLite!
« Reply #14 on: January 17, 2013, 04:09 PM »
Sorry, I should have posted them, but I had just gotten the last confirmation.

Here are the random winners:

Michael Van Overloop, Hudsonville, MI
Bob Brown, Sedona, AZ
Roger Qualheim, Camas, WA 
Gregg Howard, Mattawan, MI
Tom Prusak, North Royalton, OH

Thanks to all who participated.

While it's a bummer that we didn't have any FOG members who were winners, the plan is to have more frequent contests and giveaways here this year. So, don't give up.  [thumbs up]

Be sure to enter for a chance at a great Systainer/SysPort/Sortainer package this month at http://www.festoolsweepstakes.com.

Offline RGallup

  • Posts: 8
    • GallupandGallup.com
Re: Another chance to win tools, your choice of CXS or SysLite!
« Reply #15 on: January 17, 2013, 08:05 PM »
Bummed I didn't win a syslite but wow, that is an awesome giveaway! Would love to have those sysports in my shop!
Gallup & Gallup Design-Build-Remodel

Turning Dreams Into Homes For Three Decades

www.facebook.com/gallupandgallup

www.gallupandgallup.com