Author Topic: CTM Midi Dust Extractor  (Read 1578 times)

0 Members and 1 Guest are viewing this topic.

Offline Bossman

  • Posts: 1
CTM Midi Dust Extractor
« on: November 24, 2018, 12:59 PM »
I have just been shown the new CTM midi which looks pretty impressive but the one thing that will stop me buying one is the introduction of two blow holes (one each side of the extractor), which you can attach the existing hose to and use to blow air. The downside with this is that when using as a conventional hoover, the blow holes moves the dust into the air. There is a vented door covering the holes which in my mind should have had some form of sponge defuser/filter but then that is only my opinion.
Sorry Festool I'm not buying this one.

 

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline Alex

  • Posts: 5729
Re: CTM Midi Dust Extractor
« Reply #1 on: November 24, 2018, 03:11 PM »
Completely unnecessary feature, those blow holes, I need a  vac to suck, not blow. Anyway, if I need to upgrade at one poin I'm not gonna let some holes get in my way, I'd just plug them, but I shouldn't have to. I agree with the idea that such blow holes introduce more particles back in to the air.

Offline Frank-Jan

  • Posts: 1018
  • Dutch Canadian living in Belgium
Re: CTM Midi Dust Extractor
« Reply #2 on: November 24, 2018, 06:09 PM »
The older festool vacs (ct22, 33 etc) also had such a feature, but in normal operation NO air would come out. (The cover acts as a one-way-valve)

If there IS coming air out of those "blowholes" when there is no hose attached, I assume it's just exhaust air, which is filtered, instead of a bypass like on the older models.



Offline Laminator

  • Posts: 320
Re: CTM Midi Dust Extractor
« Reply #3 on: November 26, 2018, 08:46 AM »
Years ago I used the blow outlet on my ct22.  Instantly learned that any dust trapped in the hose will spew out into the air so I abandoned the idea of using the vac to blow.

Offline Spandex

  • Posts: 3
Re: CTM Midi Dust Extractor
« Reply #4 on: November 26, 2018, 06:18 PM »
Surely all extractors have to blow air out (otherwise where would it go?  [wink]). So why is there going to be more dust in the exhaust air on the new design than there was in the old one?

Offline Gregor

  • Posts: 1084
Re: CTM Midi Dust Extractor
« Reply #5 on: December 03, 2018, 08:45 AM »
Years ago I used the blow outlet on my ct22.  Instantly learned that any dust trapped in the hose will spew out into the air so I abandoned the idea of using the vac to blow.
Simple solution to this problem is to shortcut the vac with the hose (connect it to both input and output) for a moment in which you shake/knock/beat the hose to dislodge the dust cakes that have built inside it. This takes care of any dust that might get blown free, after that you simply pull the hose from the inlet to use it as a blower (without causing visibility problems).

So why is there going to be more dust in the exhaust air on the new design than there was in the old one?
The problem (for vacs with a HEPA filter) isn't in the exhaust air, but the way it's emitted. Having an outlet eject a concentrated stream of air is likely to raise dust from the surfaces where it's directed at - hence you want a vacuum design where the outlet is big and diffused to cause as less wind as possible, so you can suck up dust from where it's sitting (instead of turning it airborne and float around the room for the next hours).

Offline Spandex

  • Posts: 3
Re: CTM Midi Dust Extractor
« Reply #6 on: December 03, 2018, 03:14 PM »
That’s not the issue the OP claimed existed.

That being said, I’m not sure it’s that big a deal anyway. The CT can be 3m away, pointing in any direction you choose.