Author Topic: Festool CMS-TS 55R Saw Table Module  (Read 4121 times)

0 Members and 1 Guest are viewing this topic.

Offline RichardinMK

  • Posts: 2
  • You have a problem? Try herding cats
Festool CMS-TS 55R Saw Table Module
« on: January 07, 2017, 01:08 AM »
I am very disappointed with the standard of workmanship in the saw blade slot on this item.  It appears to have been a afterthought made with a rotary rasp and a electric drill.  It is so bad I accused my supplier of selling 2nd hand goods.  After inspecting a BRAND NEW UNPACKAGED item I was obliged to retract my accusation as it was in a worse state that mine.  To rectify the burrs on the slot I had to lightly draw file the edges so the timber didn't snag on the raised edges.  Also to clean the rosin off the edges in the dismantled state without cutting the cloth or your finger.
I wonder if this is a batch that escaped inspection on a Friday afternoon.  [mad] [mad]

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline Mark Johnson

  • Posts: 37
Re: Festool CMS-TS 55R Saw Table Module
« Reply #1 on: January 07, 2017, 03:47 AM »
I have this module.  My observations:

On the top surface of the module, there is no burring around the slot.  On the insides of the slot, they are very rough as you describe.  Underneath, as in on the bottom of the module, there is very, very minor burring, but I really had not noticed it until I examined it after your post.

Mark

Offline jobsworth

  • Posts: 4402
  • Burger Babe Says: I Even Buy Green Bananas
Re: Festool CMS-TS 55R Saw Table Module
« Reply #2 on: February 19, 2017, 03:16 AM »
I have the 75 module. same thing but It doesnt affect the quality of the cut, I havent felt any burrs, so I dont sweat it. It does what it supposed to do and I cant ask for more than that.
Loving the Calif sun....