Author Topic: Festool CT VA 20 Cyclone - Video  (Read 1610 times)

0 Members and 1 Guest are viewing this topic.

Offline Peter Parfitt

  • Magazine/Blog Author
  • *
  • Posts: 4039
    • New Brit Workshop on YouTube
Festool CT VA 20 Cyclone - Video
« on: September 12, 2018, 12:04 PM »
Hi Everyone

I have had the CT VA 20 on loan from Festool UK for about 10 days now and have just completed the video. I do want to check it out with the CT Sys and also do a demo using it with the HL 850 in due course.

Here is the video:



It performed far better than I expected given that the cyclone is quite stubby.

Peter


Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline GoingMyWay

  • Posts: 564
Re: Festool CT VA 20 Cyclone - Video
« Reply #1 on: September 12, 2018, 12:08 PM »
Brilliant! As always, an extremely thorough and well thought out review!
Inquiring Minds Want to Know

Offline six-point socket II

  • Posts: 709
  • aka @the_black_tie_diyer
Re: Festool CT VA 20 Cyclone - Video
« Reply #2 on: September 12, 2018, 06:04 PM »
Fantastic video as usual Peter! Thank you very much!

Kind regards,
Oliver
Kind regards,
Oliver

Offline live4ever

  • Posts: 783
Re: Festool CT VA 20 Cyclone - Video
« Reply #3 on: September 12, 2018, 06:12 PM »
Great video, thanks!  I look forward to your experiences using it with the CT-SYS - that's going to be the make-or-break it for me. 
Current systainer to productivity ratio:  very high

Offline HowardH

  • Posts: 1123
Re: Festool CT VA 20 Cyclone - Video
« Reply #4 on: September 12, 2018, 09:03 PM »
as always, excellent review Peter! I had already made my mind up to get one Oct 1, when they are officially released here in the Colonies, but your review really cemented my decision.  i works great and fits right in. 
Howard H
The Dallas Texas Festool Fanatic!

Mark Twain:  "I didn't attend the funeral, but I sent a letter approving of it." "If you tell the truth you don't have to remember anything."

mft1080, Trion, MFT/3, T15, OF 1400, RO150FEQ, TS55, RTS400, CT22, CT36E, 800, 1080, 1400, 1900 rails, CSX, Vecturo, Qwas dogs, Parf Dogs, Zobo's, Syslite Uni, CMS GE

Offline Peter Parfitt

  • Magazine/Blog Author
  • *
  • Posts: 4039
    • New Brit Workshop on YouTube
Re: Festool CT VA 20 Cyclone - Video
« Reply #5 on: September 16, 2018, 06:18 AM »
Hi Everyone,

I have had quite a few people asking me about the CT Sys and so I am making a video about using this cyclone with that baby extractor.

I can tell you now that it works very well indeed but the actual figures will be in the video.

Peter

Offline Roachmill

  • Posts: 67
Re: Festool CT VA 20 Cyclone - Video
« Reply #6 on: September 16, 2018, 06:47 AM »
Thanks Peter. I have a SYS permanently housed in the shed and a CT VA on the way, so I'm a tad relieved to hear you've had good results so far! Hoovering out the wee SYS bags is a royal PITA!

Offline Peter Parfitt

  • Magazine/Blog Author
  • *
  • Posts: 4039
    • New Brit Workshop on YouTube
Re: Festool CT VA 20 Cyclone - Video
« Reply #7 on: September 16, 2018, 07:40 AM »
Thanks Peter. I have a SYS permanently housed in the shed and a CT VA on the way, so I'm a tad relieved to hear you've had good results so far! Hoovering out the wee SYS bags is a royal PITA!

I used to "Dyson" out my CT 26 bags in my early days as I had very little left over after buying all the kit.

Cyclones are the answer and I suspect that it will not be long before Festool produce a bigger drop box.

Peter

Offline Roachmill

  • Posts: 67
Re: Festool CT VA 20 Cyclone - Video
« Reply #8 on: September 16, 2018, 09:05 AM »
Thanks for the video Peter. I am now looking forward to emptying the SYS 98% less :D

Offline Peter Parfitt

  • Magazine/Blog Author
  • *
  • Posts: 4039
    • New Brit Workshop on YouTube
Re: Festool CT VA 20 Cyclone - Video
« Reply #9 on: September 16, 2018, 09:46 AM »
Here is the CT Sys with the cyclone



Peter

Offline Dick Mahany

  • Posts: 360
Re: Festool CT VA 20 Cyclone - Video
« Reply #10 on: September 16, 2018, 10:03 AM »
Here is the CT Sys with the cyclone



Peter

Thank you Peter.  I was surprised that the results were so good.  I had expected a possible decrease in efficiency given the smaller motor and lower flow of the CT-Sys.  I have to wonder why Festool claim that it isn't suitable for use with the CT-Sys?
« Last Edit: September 16, 2018, 10:06 AM by Dick Mahany »

Offline Peter Parfitt

  • Magazine/Blog Author
  • *
  • Posts: 4039
    • New Brit Workshop on YouTube
Re: Festool CT VA 20 Cyclone - Video
« Reply #11 on: September 16, 2018, 10:35 AM »
Hi Dick

I was surprised that the CT Sys did so well but my tests were quite crude and so the CT 26 may well yet have the edge.

Even so, the CTL Sys has done really well and I too do not know why Festool make that comment - I have not heard from Festool and so have no clue - perhaps I have missed something.

Peter

Offline jobsworth

  • Posts: 5189
  • Does Anyone Know What Time It Is?
Re: Festool CT VA 20 Cyclone - Video
« Reply #12 on: September 16, 2018, 11:19 AM »
I dunno Peter you used a expired container. It expired on Sept 2015 if I read that right. Look at the video at 4:24

hehehehehe [big grin]
« Last Edit: September 16, 2018, 11:22 AM by jobsworth »

Offline Peter Parfitt

  • Magazine/Blog Author
  • *
  • Posts: 4039
    • New Brit Workshop on YouTube
Re: Festool CT VA 20 Cyclone - Video
« Reply #13 on: September 16, 2018, 12:49 PM »
I dunno Peter you used a expired container. It expired on Sept 2015 if I read that right. Look at the video at 4:24

hehehehehe [big grin]

Hi Ron,

That is a good point - I must try and remember not to eat any ice cream left in the bottom !

On a more serious note, someone has written to me and cautioned that there may be a super duper reason why this should not be used with the CTL Sys and that the poor little extractor could burn out or otherwise shuffle off this mortal coil.

Everyone should therefore understand that there may be risks involved.

It really would be great to get a Festool opinion as I cannot see anything wrong with the setup and it is particularly sweet as the CTL Sys has such a small bag.

Peter