Author Topic: RO 150 bs RAS 115  (Read 965 times)

0 Members and 2 Guests are viewing this topic.

Offline Matty04

  • Posts: 13
RO 150 bs RAS 115
« on: February 06, 2018, 02:47 PM »
Any thoughts on comparing the Rotex 150 and the RAS 115 for heavy to medium paint removal? 
Thanks Mike

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline Alex

  • Posts: 5573
Re: RO 150 bs RAS 115
« Reply #1 on: February 06, 2018, 03:10 PM »
I have both, the RAS blows the RO150 out of the water with heavy paint removal. Like 4 or 5 times as fast. It does leave a rough surface which you have to clean up again with another, finer sander, like the RO150, but overall you're done much quicker.

The RO150 itself isn't bad either, it's just that the RAS, as a slowed down angle grinder, has a lot more speed. 650 vs 3800 RPM.

Dust collection with the RAS isn't that good though.

Offline live4ever

  • Posts: 646
Re: RO 150 bs RAS 115
« Reply #2 on: February 06, 2018, 03:17 PM »
The RAS is a mean nasty paint-eater.  If you need fast and are ready to finesse with other methods, that’s the ticket.
"What you have to do tomorrow, do today.  What you have to do today, do now."  - a wise grandfather who was clearly talking about purchasing Festools

Offline Peter Halle

  • Global Moderator
  • *
  • Posts: 11075
  • Another Avatar Coming Soon
Re: RO 150 bs RAS 115
« Reply #3 on: February 06, 2018, 04:02 PM »
Ras wins hands down for removal but you may need to follow up with another sander for smoothing.

Peter

Offline Matty04

  • Posts: 13
Re: RO 150 bs RAS 115
« Reply #4 on: February 06, 2018, 06:29 PM »

Thanks guys I’m sold.

Mike

Offline Ajax

  • Posts: 173
Re: RO 150 bs RAS 115
« Reply #5 on: February 07, 2018, 01:38 AM »
RAS

Best paint remover I’ve used.
Kapex KS120, MFT/3, TS55 REQ, RTS400, RO90 DX FEQ, D90 Assortment, RO150 REQ, ETS 150/3, PRO5, D150 Assortment, DF 500, Domino 4/5/8/10 Assortment, DF700 XL, Domino 12/14 Assortment,  CT Midi, MFT/3, Kapex MFT, 2 x SysRoll

Offline ear3

  • Posts: 3467
Re: RO 150 bs RAS 115
« Reply #6 on: February 07, 2018, 05:58 PM »
Agree with all the above, but what's your specific application?  Keep in mind that you always want to be cautious using the RAS, due to the higher probability of dishing the surface.
Kapex KS 120 w/UG Cart and Extensions • CXS Set • T18+3 w/Centrotec Installer's Set • PDC 18/4 • TS 75 • TSC 55 • HKC 55 w/250, 420 and 670 FSK rails • Carvex 420 w/Accessory Kit • Domino 500 Set • Domino 700 XL • OF 2200 w/Base Accessory Kit • OF 1400 • OF 1010 • MFK 700 EQ Set • LR 32 • MFS 400 w/2000, 1000, and 700 extensions • Rotex 90 • Rotex 150 • LS 130 • ETS-EC 150/5 • ETS 150/3 • Pro 5 LTD • RTS 400 • RAS 115.04 • RS 2 • HL 850 • Vecturo OS 400 • CT 26 w/Long-Life Bag • CT Sys w/Long-Life Bag • MFT/3