Author Topic: Syslite review  (Read 16726 times)

0 Members and 1 Guest are viewing this topic.

Offline Mr Jones

  • Posts: 63
Syslite review
« on: October 13, 2011, 06:44 PM »
The Syslite is a new offering from Festool for this autumn, apparently in short supply due to its popularity in Germany. I have had it for a day on site so any observations are short term. Apologies for the lack of inline images, hopefully you can view the attached pictures.

Firstly it comes in a nice bag which is made out of the latest (thinner) festool material, the same stuff as the new/latest rail bags. I hadn't expected a protective bag and it looks like it would survive well in a glove compartment or footwell.

The unit can be charged by mains or car charger (both supplied), another nod to the auto side of Festool.

The back has a sliding cover with a flexible hook attached, you have to remove this to clip on an exterior battery. The hook is very large and the connection is a ball joint so it's very flexible. There's a connector for a camera tripod in the base.

It can be powered by the BPC or BPS series batteries, which slide onto the back. I've tried it with my NiMh BPC packs from the c12 and one fully charged gave a couple of hours 100% light. The batteries do not charge the internal battery and only the external battery powers the light whilst it is attached.

It's a very powerful and white/neutral light, in fact it's quite unpleasant to look at or get caught in the corner of your eye, because of this I found it useful to put it on top of a pile of systainers pointing towards the ceiling, and it's powerful enough to lighten a gloomy room in that position. You can see from the attached photo the quality and quantity of light this gives off, it's very powerful.

I liked having it on the whole time but the batteries will not last a whole day, probably not what it is for anyway but it certainly helps in the grey English light, I'm hoping that after a full (2 hour charge) it will last a bit longer tomorrow. It's as usual a better product than I had envisaged but still it needs to be given the price. I've included 2 photos showing the difference it can make to an unlit cupboard.

I've included one last picture of it hanging from the workstation where it can easily blind you if you accidentally look at it.

I'm sure a lot of people will be picking these up in case they ever need it, and it will come in very handy if you ever need to look under the bonnet on a winter evening. It does have an auto leaning in design and I can see it being a perfect product for mechanics as you get a lot of light and very little heat, the 30% output function could come in useful to protect your eyesight if you use this as an inspection lamp.




« Last Edit: October 20, 2011, 06:38 PM by Mr Jones »

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline Greg Powers

  • Posts: 2270
  • Metric convert
    • Stargate Unofficiial
Re: Syslite review
« Reply #1 on: October 13, 2011, 07:20 PM »
That thing puts out a lot of light! surprised it does not come in a Sys1?
« Last Edit: October 20, 2011, 08:20 PM by GPowers »
Greg Powers
Size:XL

Offline Brice_Arnold

  • Posts: 105
  • Mechanical Engineer, Machinist, Tool Addict
Re: Syslite review
« Reply #2 on: October 13, 2011, 07:22 PM »
Thanks for the review.

I like the idea of the camera tripod mount. That means I can throw one of these on it.

http://www.amazon.com/Joby-GP2-D1EN-Gorillapod-Flexible-Digital/dp/B001QVUEFI/ref=sr_1_4?ie=UTF8&qid=1318548111&sr=8-4



Now we just need to wait til 2012
"A person is not wise simply because one talks a lot."

"Never argue with an idiot. They will drag you down to their level and beat you through experience."

"Insanity: doing the same thing over and over again and expecting different results."

Offline Mr Jones

  • Posts: 63
Re: Syslite review
« Reply #3 on: October 20, 2011, 06:42 PM »
Had a good week with this light, and noticed that it does work when plugged in which means you can use it all day as long as you have power! It has grown on me, like most Festool products it fits in well on site and has impressed me enough to forget about the price.

Offline Scott Burt

  • Magazine/Blog Author
  • *
  • Posts: 1985
  • painter/writer/educator
    • Prep to Finish
Re: Syslite review
« Reply #4 on: November 24, 2011, 11:27 AM »
I love the Syslite. We have been using it a TON. It is more than a work light. It is also a very cool flashlight and general purpose light. I even took it to hunting camp last weekend so that we wouldnt have to run the generator all night for light. Love it.

Offline jmbfestool

  • Posts: 6604
Re: Syslite review
« Reply #5 on: November 24, 2011, 04:40 PM »



Just thought would show how I use my syslites   but didnt see the need to start a new topic so I have hijacked yours! Sorry! lol


JMB
*********************************************************************** [thumbs up]UK members click me
*********************************************************************** [thumbs up]

Offline jmbfestool

  • Posts: 6604
Re: Syslite review
« Reply #6 on: November 24, 2011, 05:06 PM »
I love the lights nice an bright!   Down side!   I wish they made a better plug!  It comes with a transformer like thing and you clip on the 3 prongs of a plug (earth,live,neutral)   

The problem is its one of those top heavy plugs!  Which annoy me because when you stick them in an extension lead instead of using up one socket it will use up 2 or even 3!  On my extension lead it takes up 3 sockets AND my leads are all GERMAN so they should of known!  Make it worse my extension leads only has 3 so I have to get two leads out to power two Festool systlites!  CRAZY!   

So I would like festool to design the plug like all other normal plugs!

Also they should of some how made it possible to unhook the hook so you could clip it onto the syslite its self so when you stick a battery on you can still hang it up. 


I have ordered two camera tripods to stick the syslites on!


JMB
*********************************************************************** [thumbs up]UK members click me
*********************************************************************** [thumbs up]

Offline Holzhacker

  • Posts: 883
    • www.aic-chicago.com
Re: Syslite review
« Reply #7 on: December 05, 2011, 12:47 PM »
I had no plans on picking one of these up. The review posted sounded fine but didn't exactly sway me. The thing just doesn't look that great in the pics. However I was at a dealer last week and checked them out. The dealer was also kind enough to let me toss it to the floor quite hard to test it. Of course I ended up buying one. I haven't used it much yet but did put it into service for a couple hours yesterday. The internal battery lasted for 1.5 - 2 hours continuous use on high and low. Didn't have a batt with to use more. I agree with the points of the previous review. In addition I would mention a couple other things that I find quite nice.
- The size and weight of this thing are really nice. Much better than one would assume from the standard pics. Hand carrying the unit is very comfortable. Hanging it from my pants pocket with the hook was also very nice.
- The rechargeable internal battery lasting roughly a couple hours is very nice.
- The festool owners manual does show a different house plug and adapters as being available.
- The bag is a nice feature but not all that necessary.
- At the price and light output it is very comparable to some of the Streamlight Firebox type lanterns.
I take flashlights seriously and pretty much thought this thing would be a bit of a joke. However I would say this is a very good combination worklight / flashlight. If you are thinking about one of these I would recommend it. Physically checking one out will probably sway you.
"The Code is not a ceiling to reach but a floor to work up from"

Offline Paul W.

  • Posts: 27
Re: Syslite review
« Reply #8 on: December 05, 2011, 01:11 PM »
I've been lucky enough to be able to try this one out.

At first I thought, "hey, this is kind of cool", not "I gotta have that!!"

I'm sure we've all bought something that we thought is going to be great and the reality is its has sat collecting dust somewhere. The true test on whether I 'actually' like something is if I drag it along in the morning. I'm in Winnipeg and its cold so I bring all my tools with batteries indoors where its warm each day. The Syslite comes back out with me daily.

I hate those halogens and initially thought this isn't as bright. BUT the 'pros' of being wireless, light, compact, go on my camera tripod far far out weigh the comparison. In fact, that comparison shouldn't be made. My bad.

Great handy light.

« Last Edit: December 05, 2011, 01:13 PM by Paint and Hammer »

Offline Greg Powers

  • Posts: 2270
  • Metric convert
    • Stargate Unofficiial
Re: Syslite review
« Reply #9 on: December 05, 2011, 01:18 PM »
I thought the Sys Lite was not available in the USA until mid 2012. But there are two USA posters in this thread that have been using it.  How did you guys get one?
Greg Powers
Size:XL

Offline Paul W.

  • Posts: 27
Re: Syslite review
« Reply #10 on: December 05, 2011, 01:24 PM »
I'm new to this forum and not sure how personal pics are appreciated or shared, but I'll add this here.

We have a tradition that every night we move an ornamental pickle around the tree. Each morning our 5 year old comes down and finds it. He has gotten into the habit of using the Syslite to find the pickle. Smart kid!


Offline Scott Burt

  • Magazine/Blog Author
  • *
  • Posts: 1985
  • painter/writer/educator
    • Prep to Finish
Re: Syslite review
« Reply #11 on: December 05, 2011, 02:10 PM »
I thought the Sys Lite was not available in the USA until mid 2012. But there are two USA posters in this thread that have been using it.  How did you guys get one?

I got mine this past summer from a friend who came to visit from Germany. That is the best way to get one. I am pretty sure Paint and Hammer had a similar experience.

Offline Holzhacker

  • Posts: 883
    • www.aic-chicago.com
Re: Syslite review
« Reply #12 on: December 05, 2011, 02:24 PM »
Just got back from Germany. Picked one up there. Also picked up some Surfix stuff to try out.
Shane if you are listening ... if the Surfix gets distributed here will the Sys package come in both 6" and 5"? I was going to buy the complete T-lock sys will all the stuff but it only came with 6" round pads. I don't have a 6" sander and have no intention of buying one. Couldn't talk the dealer into swapping out the 6" for 5" stuff. This may end up being another one of those, "I wish Festool would give us the option" kind of things. Also, transporting the Sys was going to be a pain. I bought Surfix pad, extra pads and refill bottles, no round buffer disks.
"The Code is not a ceiling to reach but a floor to work up from"

Offline Kristian

  • Posts: 204
Re: Syslite review
« Reply #13 on: January 24, 2012, 02:45 PM »
+1 on the SYSLITE being a great product. Just picked one up today. As mentioned earlier it's much more handy than one might expect from the product shots, it's sturdy built and gives out a great light. I usually carry round a small LED Lenser flashlight but I think the SYSLITE is going to replace that to a great extend. The distribution of light is so much better than the flashlight which is of course quite concentrated and the SYSLITE is easy to position using either the different angles on the base or the provided hook.

An expensive but very cool piece of kit.

- Kristian

Offline Timtool

  • Retailer
  • *
  • Posts: 1014
    • My website
Re: Syslite review
« Reply #14 on: January 24, 2012, 03:30 PM »
I have some feedback on mine, i think i have one of the oldest ones here, 4-5 months which i got for free in a festool contest.
It's a great piece of equipment, it frequently came in handy, but rarely in woodworking related activities. Like blast sanding and repainting the underside of my truck. One problem that i have with it now is that i need to press the ON button several times before it wants to turn on, kind of annoying. Maybe others are having this problem as well?
BR10, MFK 700, OS 400, ETS EC 150/3, KA 65-plus,TS55R, CT22E, CTLmini, CTL MIDI, CTM 36 AC HD, Kapex KS120, ETS125, ETS150/5, RO150, RO90, CXS-set, T-15+3 set, DTS400, OF900, OF1010, OF2200 set, Carvex PS420 EBQ set, EHL 65, SSU 200, Centrotec installer set, LR32-sys, FS-800, FS-LR-1400x2, domino 500+domino sys, domino 700 XL, Surfix-sys, Sys-box 1, Syslite, LEV-350, Sys-box,MFTB/1-2-4... MFTC, MFSC

Offline Nirvanabartez

  • Posts: 7
Re: Syslite review
« Reply #15 on: January 25, 2012, 03:29 AM »
Wow!! cant belieive how bright it is [eek] I like the fact it can take a fall or two