Woodworking & Power Tools Forum - Festool Owners Group > FESTOOL DISCUSSIONS > Festool Tools & Accessories > 36mm AS hose on CT-Midi?
Pages: [1]   Go Down
« previous next »
  Print  
Author Topic: 36mm AS hose on CT-Midi?  (Read 1343 times)
0 Members and 1 Guest are viewing this topic.
BobKovacs

Offline Offline

Location: UNITED STATES (US)
Member Since: Nov 2007
Posts: 296
« on: January 15, 2011, 10:19 AM »
Getting a Kapex this week, and read that the dust collection is much better with the 36mm hose than the 27mm. Also saw it being used with a Midi, I thought in the same review. The specs for the 36mm hose don't list it as being applicable for the Midi and Mini, so I figured I'd ask here if it's possible to use the 36mm hose with the Midi.
Logged
Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.

Roger Savatteri

Offline Offline

Location: Los Angeles, Ca.
Member Since: Apr 2007
Posts: 502



WWW
« Reply #1 on: January 15, 2011, 10:41 AM »
The hose on the Midi is attached to the unit through an angled connector.
Simply wiggle it back and forth while applying an upward pull, it will come out.
(get a grip of the connector - not the green hose)
It might not seem as if it will at first, but it will.
Then simply wiggle in the wider end of the 36 hose.

Whenever I'm using the Midi with an SCMS, a 2200 router or the TS75 I'm using the 36 hose.

cheers.
« Last Edit: January 15, 2011, 11:24 AM by Roger Savatteri » Logged
Los Angeles, California
tbwessel

Offline Offline

Location: Copenhagen, Denmark
Member Since: May 2012
Posts: 1
« Reply #2 on: May 15, 2012, 06:11 PM »
Hey there.

Just got my new Kapex today, and at the same time I stumbled upon this great site and this thread.

Just to make sure, that I understand correctly - the angled connector is NOT to be removed, right? It's just the hose?

Thanks :-)
Logged
Ken Nagrod
Restricted

Offline Offline

Location: New Jersey
Member Since: Jul 2010
Posts: 3438
« Reply #3 on: May 15, 2012, 06:23 PM »
Yes, the right angle connector comes out.   Welcome! to the FOG!
Logged
Brice Burrell

Online Online

Location: Pittsburgh, PA, USA
Member Since: Mar 2007
Posts: 6200


Remodeling Contractor


WWW
« Reply #4 on: May 15, 2012, 10:52 PM »
Quote from: tbwessel on May 15, 2012, 06:11 PM
Hey there.

Just got my new Kapex today, and at the same time I stumbled upon this great site and this thread.

Just to make sure, that I understand correctly - the angled connector is NOT to be removed, right? It's just the hose?

Thanks :-)

I'm not sure Ken's response to your question was clear.  The angled connector (with hose attached) comes out.  It can be a little difficult to pull the angled piece free from the extractor but it will come out. 
Logged
Check out my new blog, The Green and Dark Blue Blog.
Pages: [1]   Go Up
  Print  
« previous next »
 
Jump to: