Author Topic: Blade for HKC55 cordless saw  (Read 478 times)

0 Members and 1 Guest are viewing this topic.

Offline DanielOB

  • Posts: 148
Blade for HKC55 cordless saw
« on: April 19, 2017, 01:10 PM »
I need a blade for:

Construction works
1. studs 2x4 ... 2x12 cross-cut and rip-cut
2. plywood up to 3/4"
3. doors, windows

Fine furniture
1. soft & hardwood

What would be the best Festool blade?

I have 450 & 670 mm track for it

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline neeleman

  • Posts: 1167
Re: Blade for HKC55 cordless saw
« Reply #1 on: April 19, 2017, 01:34 PM »
There are only three blades for the HKC available.
- Panther Ø160x1,8x20-PW12 (#500460)
- Standaard Ø160x1,8x20-W18 (#500458)
- Fine Ø160x1,8x20-W32 (#500459)

I would buy all three of them like I did. Where the W18 saw blade is already supplied with the saw.
These blades get dull quicker because of the smaller kerf, also when hitting a nail.
It's always nice to have a few spare blades.
Festoolian since 1998.
FESTOOL:
SYSROCK BR10 | SYSLITE KAL II | SV-SYS D14 | DSC-AG125FH | CDD9.6 | SYSLITE DUO | DF700 | HKC55 | TXS2.6 | CTL SYS | CXS2.6 | DWC18 | CTWings | BHC18 | CS50 | CMS-OF | MFT/3 | MFT/3-VL | KS120 | TS55 R | PSC420 | PS420 | BS75 | RAS115 | RO90 | RO150 | DTS400 | RS400 | RTS400 | RS300 | LS130 | DX93 | ETS150/5 | ETS150/3 | OF1010 | OF1400 | OFK500 | MFK700 | T18 | EHL65 | CTL26 | CTL22 | CTL MIDI | WCR1000 | D27-AS Plug-it | D36 UNI-RS | D36x7 | D50x2.5 | FS800 | FS800/2 | FS1080/2 | FS1400/2 (2x) | FS3000/2 | FSK250 | FSK420 | Gecko Dosh | Toolie | CE-SYS-2010 | RB-SYS CART (2x) | LEV1400 | LEV350 | SYS-MFT
PROTOOL:
CHP26 | PDC18 | FLC UNI | VCP260 | DSC-AGP125 | DSC-AGP230 | DSG-AGP125 | DRP16

Offline RustE

  • Posts: 165

Offline rst

  • Posts: 1442
Re: Blade for HKC55 cordless saw
« Reply #3 on: April 19, 2017, 06:39 PM »
I use AGE blades in my Festsaws (55, 75, HKC),...buy them from Toolstoday.com

Offline Nat X

  • Posts: 215
Re: Blade for HKC55 cordless saw
« Reply #4 on: April 19, 2017, 07:00 PM »
Don't put a blade for the MT 55 in an HK saw. It's not made to spin that.