Author Topic: connecting a festool hose with a mirka hose  (Read 659 times)

0 Members and 1 Guest are viewing this topic.

Offline funkyrooster

  • Posts: 3
connecting a festool hose with a mirka hose
« on: November 05, 2017, 05:54 AM »
I have a festool midi and a  mirka deros, is there anyway to connect both hose's together to create a longer hose,

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.

Offline bnaboatbuilder

  • Posts: 130
Re: connecting a festool hose with a mirka hose
« Reply #1 on: November 05, 2017, 08:29 AM »
You can easily remove the tool end connector on the festool hose and the vacuum end connector on the mirka hose, look for youtube videos if you don't know how. Then and only then will you be able to see if the spiral from the raw hose can slip over the spiral of the other. Electrical tape is a good way of taping them up without long term residue.

I've had a Ceros for 5 years and added the hose extension to double the length which required this technique.
- John