sancho57
 Online
Location: So Cal USA Member Since: Jan 2011
Posts: 1090
|
 |
« Reply #60 on: February 28, 2012, 08:48 PM » |
|
I guess your only an addict if you admit to your addiction! I only popped into my local tool shop and came out a festool nut (bloody sneaky festool) I came out with a ts55 and guide rails............. Oh and now the list is as follows Kapex with ug undermount Rotex 150 sander Dx 93 sander Ctl 26 dust extractor Ctl midi dust extractor Ti 15 impact driver C15 cordless drill Centrotec set Ps 400 jigsaw Spirit levels Of 2200 router and copying rings Ofk 700 edge router A few sortainers and systainers for all other tools (non festool) As I said I only popped in the shop Now the wife says she is a festool widow, she says it's not normal to have a festool catalogue next to the bed and recently she checked my browser history  only to find nothing but festool and FOG........... paddys got it bad, poor guy |
|
|
|
|
Logged
|
Shhhhhh Dont tell the wife butttttt I bought another…….
|
|
|
Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.
|
|
Peter Halle
Global Moderator
Online
Location: Powhatan, Virginia USA Member Since: Jul 2007
Posts: 6424
|
|
« Reply #61 on: February 28, 2012, 08:57 PM » |
|
I guess your only an addict if you admit to your addiction! I only popped into my local tool shop and came out a festool nut (bloody sneaky festool) I came out with a ts55 and guide rails............. Oh and now the list is as follows Kapex with ug undermount Rotex 150 sander Dx 93 sander Ctl 26 dust extractor Ctl midi dust extractor Ti 15 impact driver C15 cordless drill Centrotec set Ps 400 jigsaw Spirit levels Of 2200 router and copying rings Ofk 700 edge router A few sortainers and systainers for all other tools (non festool) As I said I only popped in the shop Now the wife says she is a festool widow, she says it's not normal to have a festool catalogue next to the bed and recently she checked my browser history only to find nothing but festool and FOG........... Have you ever thought about visiting the US? I am planning a get together of Festool users, members here, and those interested in Festool. Based on the fact that you were physically able to post, I could see you sharing tips for lots of others! Peter |
|
|
|
|
Logged
|
The tools in my truck were talking the other day. The Dewalts, PC's, Boschs, Makitas were not happy. They also were in the minority. Their complaint: They felt unused and unappreciated since the Festools moved in. I guess the truth hurts.
|
|
|
Paddyfin1
 Offline
Location: Southampton England Member Since: Jan 2012
Posts: 48
|
|
« Reply #62 on: February 29, 2012, 05:32 PM » |
|
I have a confession to make I've actually got the bug worse than Id like admit
I also brought another c15 and Installers kit for the business partner not to mention all the Mfs Routing templates and jigs
My addiction has only been slowed by the closure of my festool (drug) dealer so I have to buy blind of the Internet (Toolfest etc) imagine what would happen if I could actually get to try all pieces of festool kit !!!!!!!!'!!!
Ps I live in Southampton, Hampshire if a new 'drug' dealer wants to set up in my area feel free
............give me a pen or even a tshirt and I'll stay loyal forever
|
|
|
|
|
Logged
|
I guess your only an addict if you admit to your addiction!
I only popped into my local tool shop and came out a festool nut (bloody sneaky festool)
I came out with a ts55 and guide rails.............
Oh and now the list is as follows
Kapex with ug undermount
Rotex 150 sander
Dx 93 sander
Ctl 26 dust extractor
Ctl midi dust extractor
Ti 15 impact driver x 2
C15 cordless drill x 2
Cxs cordless drill
Centrotec set
Ps 400 jigsaw
Spirit levels
Of 2200 router and copying rings
Ofk 700 edge router
A few sortainers and systainers for all other tools (non festool)
As I said I only popped in the shop
Now the wife says she is a festool widow, she says it's not normal to have a festool catalogue next to the bed and recently she checked my browser history only to find nothing but festool and FOG...........
|
|
|
sancho57
Online
Location: So Cal USA Member Since: Jan 2011
Posts: 1090
|
|
« Reply #63 on: February 29, 2012, 08:12 PM » |
|
Toldja all…
Hes a gonner….
Its over for him
Life as he knows it will cease to exist
|
|
|
|
|
Logged
|
Shhhhhh Dont tell the wife butttttt I bought another…….
|
|
|
Peter Parfitt
Magazine/Blog Author
Offline
Location: England Member Since: Apr 2011
Posts: 964
|
|
« Reply #64 on: March 02, 2012, 03:25 AM » |
|
I have a confession to make I've actually got the bug worse than Id like admit
I also brought another c15 and Installers kit for the business partner not to mention all the Mfs Routing templates and jigs
My addiction has only been slowed by the closure of my festool (drug) dealer so I have to buy blind of the Internet (Toolfest etc) imagine what would happen if I could actually get to try all pieces of festool kit !!!!!!!!'!!!
Ps I live in Southampton, Hampshire if a new 'drug' dealer wants to set up in my area feel free
............give me a pen or even a tshirt and I'll stay loyal forever
Hi Paddy It is always sad when one's local guy closes down and it gets difficult to touch and feel the kit. I have used Toolfest quite a bit and have had no problems at all. I even dropped in there on my way through Woking and they are a really friendly bunch. On one occasion I was desperate for a particular item and phoned Warren who had it at my workshop the following day - and at no extra charge. Buying from any authorised Festool dealer means that you will have the full support of Festool even if you have bought via the internet. Peter |
|
|
|
|
Logged
|
Kapex 120, OF 2200, OF1400, TS55, TS55R, CMS-TS55R, PSC420, Domino 500, MFT3, Rotex 90, Rotex 150, CTL26, 1400 & 2700 Guide Rails and a lovely watch
Wish List: C15, HL850, BS75, DF700, Second Extractor, new secretary
|
|
|
Kev
Online
Location: Australia Member Since: Nov 2011
Posts: 2474
|
|
« Reply #65 on: March 02, 2012, 03:43 AM » |
|
I have a confession to make I've actually got the bug worse than Id like admit
I also brought another c15 and Installers kit for the business partner not to mention all the Mfs Routing templates and jigs
My addiction has only been slowed by the closure of my festool (drug) dealer so I have to buy blind of the Internet (Toolfest etc) imagine what would happen if I could actually get to try all pieces of festool kit !!!!!!!!'!!!
Ps I live in Southampton, Hampshire if a new 'drug' dealer wants to set up in my area feel free
............give me a pen or even a tshirt and I'll stay loyal forever
Hi Paddy It is always sad when one's local guy closes down and it gets difficult to touch and feel the kit. I have used Toolfest quite a bit and have had no problems at all. I even dropped in there on my way through Woking and they are a really friendly bunch. On one occasion I was desperate for a particular item and phoned Warren who had it at my workshop the following day - and at no extra charge. Buying from any authorised Festool dealer means that you will have the full support of Festool even if you have bought via the internet. Peter Can I even try to explain how dangerous it is living where I live? I have a great Festool deal with a huge range just 5 minutes from my house. Several others 30 and 50 minutes away ... I have to drive within 1 minute of my local most days. |
|
|
|
|
Logged
|
|
|
|
Peter Parfitt
Magazine/Blog Author
Offline
Location: England Member Since: Apr 2011
Posts: 964
|
|
« Reply #66 on: March 02, 2012, 10:08 AM » |
|
Dear Kev
I am miles from my nearest Festool stockist and so almost everything has to be done over the internet. I know that this would increase my cost of living but I would love to have a Festool dealer at the end of my road. My dream dealer would also sell coffee (so that I can take my time making up my mind) and maybe they should sell dresses or jewellery so my wife can feel at home there.
Eureka!!!!!
Festool need to start a new fashion line for ladies that includes handbags and jewellery. Then, if you buy a Domino you get a 50% discount on a dress for your wife. Buy a Kapex and a handbag gets thrown in free...Ah, we do need to cater for the ladies doing carpentry and so something for the husband will be required - I know - more tools, his and her Rotex. I think I need a rest.
Peter
|
|
|
|
« Last Edit: March 02, 2012, 10:57 AM by Stone Message »
|
Logged
|
Kapex 120, OF 2200, OF1400, TS55, TS55R, CMS-TS55R, PSC420, Domino 500, MFT3, Rotex 90, Rotex 150, CTL26, 1400 & 2700 Guide Rails and a lovely watch
Wish List: C15, HL850, BS75, DF700, Second Extractor, new secretary
|
|
|
sancho57
Online
Location: So Cal USA Member Since: Jan 2011
Posts: 1090
|
|
« Reply #67 on: March 02, 2012, 10:36 AM » |
|
I have a confession to make I've actually got the bug worse than Id like admit
I also brought another c15 and Installers kit for the business partner not to mention all the Mfs Routing templates and jigs
My addiction has only been slowed by the closure of my festool (drug) dealer so I have to buy blind of the Internet (Toolfest etc) imagine what would happen if I could actually get to try all pieces of festool kit !!!!!!!!'!!!
Ps I live in Southampton, Hampshire if a new 'drug' dealer wants to set up in my area feel free
............give me a pen or even a tshirt and I'll stay loyal forever
Hi Paddy It is always sad when one's local guy closes down and it gets difficult to touch and feel the kit. I have used Toolfest quite a bit and have had no problems at all. I even dropped in there on my way through Woking and they are a really friendly bunch. On one occasion I was desperate for a particular item and phoned Warren who had it at my workshop the following day - and at no extra charge. Buying from any authorised Festool dealer means that you will have the full support of Festool even if you have bought via the internet. Peter Can I even try to explain how dangerous it is living where I live? I have a great Festool deal with a huge range just 5 minutes from my house. Several others 30 and 50 minutes away ... I have to drive within 1 minute of my local most days. Dood You got it easy, I have both national woodworking stores about 15-20 mins away, My wood, finishing products , cab hardware supplier about 15-20mins away , I have a graeat lumber yrad about 30 mins All Have Festools, Luckly for me, I only really go to 2 of them and One of them has some very very knowledgeable people in festools. Im jonesing right now, very bad, I just bought the extension fence from Tom for my Kapex and MFT, I got to cut up some 1/4" cedar ply for a closet organizer this morning.. The voices in my head are screaming buy a jig saw, buy a jig saw…. I cant stop the voices in my head… buy a jig saw, Its only $250 bucks…. You can put it on your crdet card..Buy It Buy it Buy it… Some body help me Plllleeeeeeeaaasssseee |
|
|
|
« Last Edit: March 02, 2012, 10:38 AM by sancho57 »
|
Logged
|
Shhhhhh Dont tell the wife butttttt I bought another…….
|
|
|
Peter Halle
Global Moderator
Online
Location: Powhatan, Virginia USA Member Since: Jul 2007
Posts: 6424
|
|
« Reply #68 on: March 02, 2012, 10:55 AM » |
|
I have a confession to make I've actually got the bug worse than Id like admit
I also brought another c15 and Installers kit for the business partner not to mention all the Mfs Routing templates and jigs
My addiction has only been slowed by the closure of my festool (drug) dealer so I have to buy blind of the Internet (Toolfest etc) imagine what would happen if I could actually get to try all pieces of festool kit !!!!!!!!'!!!
Ps I live in Southampton, Hampshire if a new 'drug' dealer wants to set up in my area feel free
............give me a pen or even a tshirt and I'll stay loyal forever
Hi Paddy It is always sad when one's local guy closes down and it gets difficult to touch and feel the kit. I have used Toolfest quite a bit and have had no problems at all. I even dropped in there on my way through Woking and they are a really friendly bunch. On one occasion I was desperate for a particular item and phoned Warren who had it at my workshop the following day - and at no extra charge. Buying from any authorised Festool dealer means that you will have the full support of Festool even if you have bought via the internet. Peter Can I even try to explain how dangerous it is living where I live? I have a great Festool deal with a huge range just 5 minutes from my house. Several others 30 and 50 minutes away ... I have to drive within 1 minute of my local most days. Dood You got it easy, I have both national woodworking stores about 15-20 mins away, My wood, finishing products , cab hardware supplier about 15-20mins away , I have a graeat lumber yrad about 30 mins All Have Festools, Luckly for me, I only really go to 2 of them and One of them has some very very knowledgeable people in festools. Im jonesing right now, very bad, I just bought the extension fence from Tom for my Kapex and MFT, I got to cut up some 1/4" cedar ply for a closet organizer this morning.. The voices in my head are screaming buy a jig saw, buy a jig saw…. I cant stop the voices in my head… buy a jig saw, Its only $250 bucks…. You can put it on your crdet card..Buy It Buy it Buy it… Some body help me Plllleeeeeeeaaasssseee Send me your credit card and I will make you feel twice as good. I'll order two!  Peter |
|
|
|
|
Logged
|
The tools in my truck were talking the other day. The Dewalts, PC's, Boschs, Makitas were not happy. They also were in the minority. Their complaint: They felt unused and unappreciated since the Festools moved in. I guess the truth hurts.
|
|
|
Kev
Online
Location: Australia Member Since: Nov 2011
Posts: 2474
|
|
« Reply #69 on: March 02, 2012, 10:56 AM » |
|
Dear Kev
I am miles from my nearest Festool stockist and so almost everything has to be done over the internet. I know that this would increases my cost of living but I would love to have a Festool dealer at the end of my road. My dream dealer would also sell coffee (so that I can take my time making up my mind) and maybe they should sell dresses or jewellery so my wife can feel at home there.
Eureka!!!!!
Festool need to start a new fashion line for ladies that includes handbags and jewellery. Then, if you buy a Domino you get a 50% discount on a dress for your wife. Buy a Kapex and a handbag gets thrown in free...Ah, we do need to cater for the ladies doing carpentry and so something for the husband will be required - I know - more tools, his and her Rotex. I think I need a rest.
Peter
Oh Peter, you've got it bad  Not wishing to rub salt ... My nearest Festool dealer has a little cafe 50m away ... I often start my Saturday with an egg and bacon sandwich - then, coffee in hand, down to the toys. Immediately round the corner is a selection of shops that interest my wife - but normally she would go 3 minutes further on to the shopping mall nearby. Even if you knew Sydney, the northern beaches peninsula where I live is quite unusual and coincidentally kind to home woodworkers (with the exception of the average size of a house block - because I'm near the surf beaches, 700sqm is a large block). Within a 10 minute driving radius are multiple specialist timber, general and specialized hardware, building materials, electrical specialists, etc - disproportionate to the rest of Sydney. There's even a discount tool warehouse that I purchased a cordless Dremel the other day for less than US eBay prices! But it's not all roses, Sydney is now officially more expensive to live in than New York - which means I'm working silly hours and probably spend more time buying tools than I get to spend using them. At least my home is a real "fixer upper" so there's lots of therapy waiting and ready! All the best, Kev |
|
|
|
|
Logged
|
|
|
|
Peter Parfitt
Magazine/Blog Author
Offline
Location: England Member Since: Apr 2011
Posts: 964
|
|
« Reply #70 on: March 02, 2012, 11:02 AM » |
|
Dear Kev
Gosh! Did you die and wake up in Heaven?
Summer is on the way here so it is not all bad!
Peter
|
|
|
|
|
Logged
|
Kapex 120, OF 2200, OF1400, TS55, TS55R, CMS-TS55R, PSC420, Domino 500, MFT3, Rotex 90, Rotex 150, CTL26, 1400 & 2700 Guide Rails and a lovely watch
Wish List: C15, HL850, BS75, DF700, Second Extractor, new secretary
|
|
|
Kev
Online
Location: Australia Member Since: Nov 2011
Posts: 2474
|
|
« Reply #71 on: March 02, 2012, 11:12 AM » |
|
I have a confession to make I've actually got the bug worse than Id like admit
I also brought another c15 and Installers kit for the business partner not to mention all the Mfs Routing templates and jigs
My addiction has only been slowed by the closure of my festool (drug) dealer so I have to buy blind of the Internet (Toolfest etc) imagine what would happen if I could actually get to try all pieces of festool kit !!!!!!!!'!!!
Ps I live in Southampton, Hampshire if a new 'drug' dealer wants to set up in my area feel free
............give me a pen or even a tshirt and I'll stay loyal forever
Hi Paddy It is always sad when one's local guy closes down and it gets difficult to touch and feel the kit. I have used Toolfest quite a bit and have had no problems at all. I even dropped in there on my way through Woking and they are a really friendly bunch. On one occasion I was desperate for a particular item and phoned Warren who had it at my workshop the following day - and at no extra charge. Buying from any authorised Festool dealer means that you will have the full support of Festool even if you have bought via the internet. Peter Can I even try to explain how dangerous it is living where I live? I have a great Festool deal with a huge range just 5 minutes from my house. Several others 30 and 50 minutes away ... I have to drive within 1 minute of my local most days. Dood You got it easy, I have both national woodworking stores about 15-20 mins away, My wood, finishing products , cab hardware supplier about 15-20mins away , I have a graeat lumber yrad about 30 mins All Have Festools, Luckly for me, I only really go to 2 of them and One of them has some very very knowledgeable people in festools. Im jonesing right now, very bad, I just bought the extension fence from Tom for my Kapex and MFT, I got to cut up some 1/4" cedar ply for a closet organizer this morning.. The voices in my head are screaming buy a jig saw, buy a jig saw…. I cant stop the voices in my head… buy a jig saw, Its only $250 bucks…. You can put it on your crdet card..Buy It Buy it Buy it… Some body help me Plllleeeeeeeaaasssseee Hah - my local is open late enough that Fridays on the way home from the office typically suffer a minor diversion ... Today resulted in a DTS400 concealed in the boot and a Domino XL on order. I'm way beyond voices in my head ... Something alien takes complete control of my body - I feel like I'm watching a documentary through the eyes of a crazy person with a Festool fetish! (but I'll still sneak back there the next morning, also doing the rounds of shops that don't even sell Festool - like last week, which resulted in yet another surf board). |
|
|
|
|
Logged
|
|
|
|
Kev
Online
Location: Australia Member Since: Nov 2011
Posts: 2474
|
|
« Reply #72 on: March 02, 2012, 11:14 AM » |
|
Dear Kev
Gosh! Did you die and wake up in Heaven?
Summer is on the way here so it is not all bad!
Peter
 maybe - I was born in Luton after all Cheers, Kev |
|
|
|
|
Logged
|
|
|
|
sancho57
Online
Location: So Cal USA Member Since: Jan 2011
Posts: 1090
|
|
« Reply #73 on: March 02, 2012, 02:42 PM » |
|
Kev,
I think your possessed?
Maybe you can get Shane to give you a exorcism
your head will turn around as you scream domino, mft..
they'll strp you to your rack and you'll have CMS written on your stomach…
|
|
|
|
|
Logged
|
Shhhhhh Dont tell the wife butttttt I bought another…….
|
|
|
Paddyfin1
Offline
Location: Southampton England Member Since: Jan 2012
Posts: 48
|
|
« Reply #74 on: March 03, 2012, 12:44 PM » |
|
You say about festool making women's clothes to appease the non believers ( sorry I ment wives) whilst we're buying new toys (sorry ment tools) I've noticed that festool do make the non believers some tshirts but when I asked the wife if she wanted one she threatened me with violence This week I've been working near my nearest festool dealer in Winchester, after I explained that I don't get to play with any bits of kit he promptly told me that festool are coming for demos at the end of the month How will I explain another systainer or maybe a £500 table with holes in it Maybe I should offer her some new shoes............. |
|
|
|
|
Logged
|
I guess your only an addict if you admit to your addiction!
I only popped into my local tool shop and came out a festool nut (bloody sneaky festool)
I came out with a ts55 and guide rails.............
Oh and now the list is as follows
Kapex with ug undermount
Rotex 150 sander
Dx 93 sander
Ctl 26 dust extractor
Ctl midi dust extractor
Ti 15 impact driver x 2
C15 cordless drill x 2
Cxs cordless drill
Centrotec set
Ps 400 jigsaw
Spirit levels
Of 2200 router and copying rings
Ofk 700 edge router
A few sortainers and systainers for all other tools (non festool)
As I said I only popped in the shop
Now the wife says she is a festool widow, she says it's not normal to have a festool catalogue next to the bed and recently she checked my browser history only to find nothing but festool and FOG...........
|
|
|
Don T
Offline
Location: Phoenix, AZ Member Since: Jan 2008
Posts: 609
Phoenix, Az
|
|
« Reply #75 on: March 03, 2012, 12:53 PM » |
|
It's funny this subject of product for both spouses in the same place has come up. Several years ago my wife and I opened a high end kitchen toy store that unfortunately did not do well. I told my wife we should have a tool store next door so the wife could to the kitchen store and husband could to the tool store and they both could spend money without getting ticked at each other and business may have flourished but we never did it.
|
|
|
|
|
Logged
|
RO150, C12, DF 500 Q, CT33, TS75, MFT3, Kapex 120, MFT3/Kapex, MFK 700, RO 90, ETS150/3, CT22, Centrotec Installers Kit
|
|
|
Peter Parfitt
Magazine/Blog Author
Offline
Location: England Member Since: Apr 2011
Posts: 964
|
|
« Reply #76 on: March 03, 2012, 12:55 PM » |
|
Paddy,
There are some great handbag shops in Winchester, and shoe shops, and dress shops and....
and some great places to have coffee near the cathedral.
Don
What a brilliant idea - I suppose it is too late to give it a try - it could just work you know.
Peter
|
|
|
|
« Last Edit: March 03, 2012, 12:57 PM by Stone Message »
|
Logged
|
Kapex 120, OF 2200, OF1400, TS55, TS55R, CMS-TS55R, PSC420, Domino 500, MFT3, Rotex 90, Rotex 150, CTL26, 1400 & 2700 Guide Rails and a lovely watch
Wish List: C15, HL850, BS75, DF700, Second Extractor, new secretary
|
|
|
Don T
Offline
Location: Phoenix, AZ Member Since: Jan 2008
Posts: 609
Phoenix, Az
|
|
« Reply #77 on: March 03, 2012, 12:59 PM » |
|
If I would have had a plethora of money I would have done it and I would be sitting on easy street right now. Well at least in my mind.
|
|
|
|
|
Logged
|
RO150, C12, DF 500 Q, CT33, TS75, MFT3, Kapex 120, MFT3/Kapex, MFK 700, RO 90, ETS150/3, CT22, Centrotec Installers Kit
|
|
|
ScotF
Offline
Location: Southern Orange County, CA, USA Member Since: Jul 2009
Posts: 1368
|
|
« Reply #78 on: March 03, 2012, 01:18 PM » |
|
What is funny about my problem is that I get equally excited when I see someone else buying new Festools -- I was at my local dealer just yesterday and was excited for the customer buying a TS75 and CT combo!
Scot
|
|
|
|
|
Logged
|
|
|
|
|
