Author Topic: Does the "Universal Cleaning Set D 36 UNI-RS-Plus" fit the CT 26 E HEPA?  (Read 723 times)

0 Members and 1 Guest are viewing this topic.

Offline ryanc

  • Posts: 13
I just bought the CT 26 E HEPA dust extractor along with the "Universal Cleaning Set D 36 UNI-RS-Plus" and now I'm wondering if they are not compatible.  I haven't received the items yet.  Can anyone please confirm for me?  Thanks!

Ryan

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline SRSemenza

  • Global Moderator
  • *
  • Posts: 8614
  • Finger Lakes Region, NY State , USA
Welcome to the forum!  [smile]

     Yes, the hoses all have the same size connector on the vac end and fit the vac port.

Seth

Offline ryanc

  • Posts: 13
Welcome to the forum!  [smile]

     Yes, the hoses all have the same size connector on the vac end and fit the vac port.

Seth

Great!  Thanks, Seth!

So all of those numbers like "D 27", "D 36", "D 50" are referring only to the non-vac end sizing, correct?  So that you can tell which tools will fit which hoses using these "D ..." numbers?

Thanks again!

Ryan

Offline SRSemenza

  • Global Moderator
  • *
  • Posts: 8614
  • Finger Lakes Region, NY State , USA
Welcome to the forum!  [smile]

     Yes, the hoses all have the same size connector on the vac end and fit the vac port.

Seth

Great!  Thanks, Seth!

So all of those numbers like "D 27", "D 36", "D 50" are referring only to the non-vac end sizing, correct?  So that you can tell which tools will fit which hoses using these "D ..." numbers?

Thanks again!

Ryan

Right .........  27mm , 36mm, 50mm.  Tool end. You will have a D36 hose from the cleaning set and a D27 hose from the vac. Good combination.  Some of the tools will accept both the D27 (fits inside the port) and D36 (fits outside the port) size.  Such as the track saws and 1400 router.

Seth

Offline ryanc

  • Posts: 13
Welcome to the forum!  [smile]

     Yes, the hoses all have the same size connector on the vac end and fit the vac port.

Seth

Great!  Thanks, Seth!

So all of those numbers like "D 27", "D 36", "D 50" are referring only to the non-vac end sizing, correct?  So that you can tell which tools will fit which hoses using these "D ..." numbers?

Thanks again!

Ryan

Right .........  27mm , 36mm, 50mm.  Tool end. You will have a D36 hose from the cleaning set and a D27 hose from the vac. Good combination.  Some of the tools will accept both the D27 (fits inside the port) and D36 (fits outside the port) size.  Such as the track saws and 1400 router.

Seth

Perfect!  Thanks, Seth!

Ryan