Author Topic: Domino Connector SV-SYS (700) set question  (Read 1203 times)

0 Members and 1 Guest are viewing this topic.

Offline James Biddle

  • Posts: 125
Domino Connector SV-SYS (700) set question
« on: May 11, 2018, 07:58 PM »
I bought this set from Tool Nut when it first came out and today opened the plastic to use it for the first time.  After going through everything, I found that I was a missing the wrench for the set.  Was it supposed to be included?

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline Birdhunter

  • Posts: 2243
  • Woodworker, Sportsman, Retired
Re: Domino Connector SV-SYS (700) set question
« Reply #1 on: May 12, 2018, 05:42 AM »
I bought 8 corner connectors from an eBay seller. No wrench was included, but I used an Allen wrench to get the tightening started and then switched to one of my existing wrenches to do the final tightening. If you need the wrench size, I can look it up.

I checked the Festool USA site and their description of the set mentions a wrench.

I’d call Festool and clarify the situation.
« Last Edit: May 12, 2018, 05:50 AM by Birdhunter »
Birdhunter

Offline Gregor

  • Posts: 896
Re: Domino Connector SV-SYS (700) set question
« Reply #2 on: May 12, 2018, 07:24 AM »
You need a 10mm hex wrench (or nut and a ratchet).

My guess is that it isn't included as one of these is available in basically every household that has a toolbox, here in germany.


Offline neeleman

  • Posts: 1188
Re: Domino Connector SV-SYS (700) set question
« Reply #3 on: May 12, 2018, 10:20 AM »
I assume you have the complete SV-SYS D14 systainer.
There should be a 4 mm hex key hidden in the foam lid.
At least it was in mine.

Festoolian since 1998.
FESTOOL:
SYSROCK BR10 | SYSLITE KAL II | SV-SYS D14 | DSC-AG125FH | CDD9.6 | SYSLITE DUO | DF700 | HKC55 | TXS2.6 | CTL SYS | CXS2.6 | DWC18 | CTWings | BHC18 | CS50 | CMS-OF | MFT/3 | MFT/3-VL | KS120 | TS55 R | PSC420 | PS420 | BS75 | RAS115 | RO90 | RO150 | DTS400 | RS400 | RTS400 | RS300 | LS130 | DX93 | ETS150/5 | ETS150/3 | OF1010 | OF1400 | OFK500 | MFK700 | T18 | EHL65 | CTL26 | CTL22 | CTL MIDI | WCR1000 | D27-AS Plug-it | D36 UNI-RS | D36x7 | D50x2.5 | FS800 | FS800/2 | FS1080/2 | FS1400/2 (2x) | FS3000/2 | FSK250 | FSK420 | Gecko Dosh | Toolie | CE-SYS-2010 | RB-SYS CART (2x) | LEV1400 | LEV350 | SYS-MFT
PROTOOL:
CHP26 | PDC18 | FLC UNI | VCP260 | DSC-AGP125 | DSC-AGP230 | DSG-AGP125 | DRP16

Offline jobsworth

  • Posts: 5097
  • Does Anyone Know What Time It Is?
Re: Domino Connector SV-SYS (700) set question
« Reply #4 on: May 12, 2018, 10:27 AM »

I wonder if my domino 500 set has the Alan wrench hidden in the foam. I have mines for about 5 years and never noticed if I it had one or not.

Ill have to check that
« Last Edit: May 12, 2018, 10:30 AM by jobsworth »

Offline James Biddle

  • Posts: 125
Re: Domino Connector SV-SYS (700) set question
« Reply #5 on: May 12, 2018, 07:03 PM »
You need a 10mm hex wrench (or nut and a ratchet).

My guess is that it isn't included as one of these is available in basically every household that has a toolbox, here in germany.

I was posting more for Festool to remove it from their included items rather than needing a 10mm wrench.

Offline Gregor

  • Posts: 896
Re: Domino Connector SV-SYS (700) set question
« Reply #6 on: May 13, 2018, 01:07 PM »
Oh, with wrench (which is ambiguous) you refered to the allen key.
That one should be somewhere in there, at least in mine it was.