Author Topic: Dovetails with the OF 1010 Router: Which guide bushing?  (Read 3165 times)

0 Members and 1 Guest are viewing this topic.

Offline Dan Lyke

  • Posts: 324
    • Flutterby.net
Dovetails with the OF 1010 Router: Which guide bushing?
« on: January 27, 2007, 06:41 PM »
Just got back from a hardware store where the lure of a cheap dovetail jig caught me. The manual says I need a 7/16" OD guide bushing.

In looking through the Festool manual, I'm thinking that in Festool parlance this means a copying ring. Is this correct? And if so, does that mean I need the one with the 11mm diameter, which appears to be KR D 13.8/OF 1010, item number 484 176?

Or does this involve the Guide Bushing Adaptor (which the catalog doesn't have a picture of) and some other part?

Oh for a decent dealer near us. We've got one that allegedly carries parts of the line, although they stock nothing and want to hit me with a special order charge for every little part we want to order, and the one we've bought our stuff to is near my sweety's family, but that's four hours away.

Accomplished computer geek, novice woodworker, road cyclist, in Sonoma county, northern California.

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline JayStPeter

  • Posts: 364
Re: Dovetails with the OF 1010 Router: Which guide bushing?
« Reply #1 on: January 27, 2007, 07:52 PM »
Yes, and no.  You do need something like a copy ring, but you need one with a 7/16" OD.  Close probably won't be good enough in the case of a dovetail jig.  Most other brand routers use guide bushings made to fit into a 1.5" hole in the router base.  There are many mfrs of guide bushings in US sizes available from just about any woodworking store or home center.  The OF1400 has a std guide bushing adapter available (mine was included), not sure about the 1010.
Jay St. Peter

Offline Les Spencer

  • Posts: 487
Re: Dovetails with the OF 1010 Router: Which guide bushing?
« Reply #2 on: January 27, 2007, 08:00 PM »
Dan,

Contact Bob Marino about the Porter Cable adapter for the 1010. It is made to allow you to use PC type bushings.

Les (near Indy)
Les (near Indy) XL