Author Topic: Drywall  (Read 1262 times)

0 Members and 1 Guest are viewing this topic.

Offline saands

  • Posts: 9
Drywall
« on: July 06, 2018, 02:25 PM »
Hello,

I am new to this Forum and I just wanted to thank everyone for their valuable contributions. I also wanted to ask a question. I am wondering if anyone has used the ETS EC 150/5 sander to sand drywall?

Thanks!

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline Peter_C

  • Posts: 723
Re: Drywall
« Reply #1 on: July 06, 2018, 05:39 PM »
Hello,

I am new to this Forum and I just wanted to thank everyone for their valuable contributions. I also wanted to ask a question. I am wondering if anyone has used the ETS EC 150/5 sander to sand drywall?

Thanks!
I used mine last week for a drywall section repair, after a lame plumber cut the hole all wrong. It shreds the material so use a finer grit, as in over 220 grit, 320 grit would be a good place to start. Turn the speed down, along with suction. Abranet, or Granat net would be best to use, but anything that sands will get the job done.

If doing entire rooms or whole house, you might struggle to get it flat, especially if it is your first time. A regular manual hand sander on a pole is more assured to keep the wall flat.

How you do the mud is important. Thinner is better and the longer the knife you use the better for skim coating. Many folks will apply a following layer of very thin mud with a paint roller, then knife it.

Online Peter Halle

  • Global Moderator
  • *
  • Posts: 11600
Re: Drywall
« Reply #2 on: July 06, 2018, 05:55 PM »
I regularly use my ETS150/3 to sand drywall.  Love not having to blow boulders out of my nose at the end of the day.

Peter

Offline Sparktrician

  • Posts: 3674
Re: Drywall
« Reply #3 on: July 06, 2018, 06:32 PM »
I'd suggest that you look at the new Granat mesh abrasives for sanding drywall.  I've used regular Granat on my RO 125 and ETS 125.  Both work very well.  I seldom get called to do drywall work, so unless there's a real need, I'm unlikely to invest in the mesh abrasives.  I agree with Peter on the issue of a cleaner breathing environment. 
- Willy -

 "Remember, a chip on the shoulder is a sure sign of wood higher up." - Brigham Young

Offline RussellS

  • Posts: 220
Re: Drywall
« Reply #4 on: July 06, 2018, 10:29 PM »
Sanding drywall?  I have not done that in years.  I just use a damp/wet rag to wipe the dry drywall mud.  A wet rag smooths drywall mud great.  Maybe on the very last coat you might hand sand with a piece of fine grit paper.

Re: Drywall
« Reply #5 on: July 07, 2018, 03:24 PM »
Used the ETS EC 150/5 a number of times for drywall sanding, I was totally convinced after redoing a ceiling.

I don't do enough drywall to warrant a Planex - nor am I a painter (though I sometimes have to take on that role) so for me the ETS EC works really well, lightweight and agile.

Festool:  CS 50EB precisio set, Domino DF500, DF XL 700, OFK500 edge router, OF1010 router EHL65 planer, CTL Mini/Midi Vac, CTL 26 vac MFT800+1080 tables
DSC-AG Grinder,  RAS 115
Rotex 150, ETS EC 150/5 RTS400
Drills: T18, BHC18, CXS.
SysLite KAL II, SYS Rock.
Sys- and Sortainers galore.

Line up has been reduced with the introduction of Mafell/Metabo tools. Red Green and Blue do mix well in the shop.

Offline mobetta

  • Posts: 14
Re: Drywall
« Reply #6 on: July 08, 2018, 03:38 PM »
I use my pro 5 and DTS for the small jobs and inside corners. Planex for the big flats.

The EZ is on recon currently paired with the CT AC
RO125  pro 5  DTS400
DF500  DF700  TSC55  HKC55  TS55
DWC-18 Planex CT36AC  CT36  CTMidi  Ctsys x2