Author Topic: Is this part from my Domino DF 500  (Read 981 times)

0 Members and 1 Guest are viewing this topic.

Offline Slider613

  • Posts: 37
Is this part from my Domino DF 500
« on: January 19, 2017, 05:57 PM »
This may seem a bit silly, just got a Domino (love it BTW), and while using it this plastic piece fell to the ground, I'm not positive if it's from the Domino or just some random piece of plastic on my bench that fell off. Could  it find anything missing on the Domino.

Any ideas?
TS 75 EQ, Router 1400 OF, Carvex PS420 EQB, Rotex 90 and 125, ETS 150/3, Domino DF 500 + Kit, CXS Drill set, T18 Drill Set, MFT/3, Rails 75" and 2x 55" with Connector and Case, Compact Cleaning Kit, Sys 4 TLsort/3, CT 48 with 27mm and 36mm anti static hose, Sys MFT-FX set.

Plus a whole stack of accessories

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline bobfog

  • Posts: 835
Re: Is this part from my Domino DF 500
« Reply #1 on: January 19, 2017, 06:01 PM »
Yes there are two of them that sit atop each side of the fence height adjustment rails.

« Last Edit: January 19, 2017, 06:04 PM by bobfog »

Offline Slider613

  • Posts: 37
Re: Is this part from my Domino DF 500
« Reply #2 on: January 19, 2017, 06:03 PM »
Thanks.
TS 75 EQ, Router 1400 OF, Carvex PS420 EQB, Rotex 90 and 125, ETS 150/3, Domino DF 500 + Kit, CXS Drill set, T18 Drill Set, MFT/3, Rails 75" and 2x 55" with Connector and Case, Compact Cleaning Kit, Sys 4 TLsort/3, CT 48 with 27mm and 36mm anti static hose, Sys MFT-FX set.

Plus a whole stack of accessories