Author Topic: ETS EC 125/3 EQ  (Read 850 times)

0 Members and 1 Guest are viewing this topic.

Offline wam3mac

  • Posts: 6
ETS EC 125/3 EQ
« on: March 12, 2019, 03:55 PM »
Will the Festool 493912 Edge Guide fit on the ETS EC 125/3 EQ?

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline neeleman

  • Posts: 1234
Re: ETS EC 125/3 EQ
« Reply #1 on: March 12, 2019, 04:00 PM »
No that one is for the Rotex RO 125.
Actually there is no edge guide for the ETS EC 125.
Only for the ETS 125 en ETSC 125 (201690).
Festoolian since 1998.
FESTOOL:
RTSC400Li | CTL MIDI I | SYSROCK BR10 | SYSLITE KAL II | SV-SYS D14 | DSC-AG125FH | CDD9.6 | SYSLITE DUO | DF700 | HKC55 | TXS2.6 | CTL SYS | CXS2.6 | DWC18 | CTWings | BHC18 | CS50 | CMS-OF | MFT/3 | MFT/3-VL | KS120 | TS55 R | PSC420 | PS420 | BS75 | RAS115 | RO90 | RO150 | RS400 | RTS400 | RS300 | LS130 | DX93 | ETS150/5 | ETS150/3 | OF1010 | OF1400 | OFK500 | MFK700 | T18 | EHL65 | CTL26 | CTL22 | WCR1000 | D27-AS Plug-it | D36 UNI-RS | D36x7 | D50x2.5 | FS800 | FS800/2 | FS1080/2 | FS1400/2 (2x) | FS3000/2 | FSK250 | FSK420 | Gecko Dosh | Toolie | CE-SYS-2010 | RB-SYS CART (2x) | LEV1400 | LEV350 | SYS-MFT
PROTOOL:
CHP26 | PDC18 | FLC UNI | VCP260 | DSC-AGP125 | DSC-AGP230 | DSG-AGP125 | DRP16

Offline Alex

  • Posts: 6023
Re: ETS EC 125/3 EQ
« Reply #2 on: March 12, 2019, 04:52 PM »
As neeleman said, they don't fit out of the box, but I know that if I wanted an edge guide on my ETS EC 125/3 EQ I would find a way to adapt one.

Offline Sanderxpander

  • Posts: 366
Re: ETS EC 125/3 EQ
« Reply #3 on: March 12, 2019, 07:15 PM »
Why would they have one that fits all their 125mm sanders except for the EC model??

Offline Alex

  • Posts: 6023
Re: ETS EC 125/3 EQ
« Reply #4 on: March 13, 2019, 02:48 AM »
It's not a single model but a separate edge guard for each sander. I guess they didn't make one for the EC sanders because they primarily aimed those at the automotive sector. A bit short-sighted of course to think people don't want to use them for anything they want.

Offline JimmyFord

  • Posts: 7
Re: ETS EC 125/3 EQ
« Reply #5 on: March 15, 2019, 06:42 PM »
It's not a single model but a separate edge guard for each sander. I guess they didn't make one for the EC sanders because they primarily aimed those at the automotive sector. A bit short-sighted of course to think people don't want to use them for anything they want.

I’ve been toying with the idea of trying to get a 3D print fabricator to make one for my ets ec, have you been successful at modding the guard from the rotex or the brushed ets?