Author Topic: Festool Drill Stand  (Read 22037 times)

0 Members and 1 Guest are viewing this topic.

Offline fp1337

  • Posts: 39
Re: Festool Drill Stand
« Reply #30 on: December 16, 2013, 02:54 PM »
I have this one: http://www.amazon.com/Wolfcraft-4525404-Attachment-4-Inch-8-Inch/dp/B000JCIMEA/ref=pd_cp_hi_0

Not the best, but better than most others in this technology. I have yet to find something better to drill 3/4 inch forstner holes straight in the middle of a large piece of wood (does not fit drill press). I can even enlarge an existing forstner hole which is not possible with just a drill. But I'm still interested in more accurate means.

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline unclefester

  • Posts: 24
Re: Festool Drill Stand
« Reply #31 on: January 01, 2014, 02:43 PM »
+1 on the "GARBAGE"  It's horrible in any position other than 90, and even drilling at 90 it's got a bit of slop.  

I had hopes of using it to drill out a 3/4 gridded bench top for clamping and just gave up after all of the randomness!

Cheers,
Eric

(Attachment Link)

(Attachment Link)

Your photos are great.  Makes me want to get the drill press and I don't even want one or would ever use it [laughing]

(Attachment Link)

Uncle Fester
Cut it twice, measure once and it's still too short

Offline mhmcgrath

  • Posts: 8
Re: Festool Drill Stand
« Reply #32 on: January 30, 2017, 09:41 AM »
Hi,
I'm new to the forum and just converting my shop to Festool.  I've been woodworking for many years using
a variety of tools added over the years.  I will be posting a shop tour and documenting my Festool "tooling up." 
But for now I wanted to offer an idea on this thread of a drill stand.
I own a Swiss Rex vise system (heavy duty version of the old Zyliss vise, which I also own).  It may work for
the Festool drills, though I can't test since I don't own one (yet!).  If its the standard metric collar size at the
drill's working end, it should work.
Watch the video for an idea of how it functions.  The drill stuff is later in the video, but you may like the vise
anyway!  I have a drill which I clamp in mine as an abrasive tool.


Cheers,
Mike
BTW, how do you format these posts (I'm a rookie poster) on a Mac? 
My lines just keep running out to the right!

Offline mhmcgrath

  • Posts: 8
Re: Festool Drill Stand
« Reply #33 on: January 30, 2017, 01:21 PM »
Here's a pic of the setup.



Sent from my iPhone using Tapatalk

Offline Holmz

  • Posts: 4010
Re: Festool Drill Stand
« Reply #34 on: January 30, 2017, 03:27 PM »
@mhmcgrath is that 43-mm diameter holed thing that is attached to the Zyliss vice something that comes with the newer Zyliss vices?
or
Was it something that was made and attached to the vice?



I just figured out the the US spelling is 'vise' and the rest of the world is 'vice'.

Offline mike_aa

  • Posts: 990
Re: Festool Drill Stand
« Reply #35 on: January 30, 2017, 05:58 PM »
@mhmcgrath is that 43-mm diameter holed thing that is attached to the Zyliss vice something that comes with the newer Zyliss vices?
or
Was it something that was made and attached to the vice?



I just figured out the the US spelling is 'vise' and the rest of the world is 'vice'.

@Holmz  when I see the word "vice" is what comes to mind!   [eek]

Offline mhmcgrath

  • Posts: 8
Re: Festool Drill Stand
« Reply #36 on: January 30, 2017, 08:56 PM »
@mhmcgrath is that 43-mm diameter holed thing that is attached to the Zyliss vice something that comes with the newer Zyliss vices?
or
Was it something that was made and attached to the vice?



I just figured out the the US spelling is 'vise' and the rest of the world is 'vice'.
It is integral to both the SwissRex (in my photo) and to the "modern" Zyliss vises - in the latter it is a separate, but rail compatible, fitting that comes with the vise. (several makes nowadays).  You can always check Ebay where these types of vises are up for sale.  They are in varying states of repair and completeness - I have purchased two over the years there that were BARGAINS.

Offline Z48LT1

  • Posts: 69
  • My excuse is I never expected to be caught.
Re: Festool Drill Stand
« Reply #37 on: January 30, 2017, 11:41 PM »
I need one of those SwissRex systems but Google is failing me.  Anyone know where I can get one in NA?

Best,

Gary

Offline Holmz

  • Posts: 4010
Re: Festool Drill Stand
« Reply #38 on: January 31, 2017, 06:17 AM »
@mike_aa I think of a CZ70, or a Sphinx, when I think of Miami Vice.

Offline mhmcgrath

  • Posts: 8
Re: Festool Drill Stand
« Reply #39 on: January 31, 2017, 06:27 AM »
I need one of those SwissRex systems but Google is failing me.  Anyone know where I can get one in NA?

Best,

Gary
I can recommend Advanced Machinery, right here in little old Delaware!  https://advanced-machinery.myshopify.com/. Small company, specialized European made equipment, good to work with.  This is where I purchased my SwissRex.


Sent from my iPad using Tapatalk

Offline PreferrablyWood

  • Posts: 868
Re: Festool Drill Stand
« Reply #40 on: January 31, 2017, 03:13 PM »
I've been seriously considering getting a drill press but don't have a shop as yet, so if I could find a drill stand that at least sturdy enough It might be better for my mobile shop situation and work out fine for most of my uses; metal work, making precise jigs, Model making spindle sander etc.

I found this  at Dieter Schnid - Fine tools https://www.fine-tools.com/bohrstaender.html the last offering on the page  a DUSS Precision Drill Stand KB 43 solid as a rock and you can rotate the head so you can use it to drill in the middle of a piece, I had thought of making an offset bench so you could drill through to 240mm by flipping the stock around normally it comes with 120mm depth of travel which for most uses would be fine. Putting a heavy duty Festool drill in it would be great if you have a lot of centrotec bits.. Unfortunately the collar is 43mm so it wouldn't fit the beefier Festool drill  DR 20 FF https://www.toolstime.de/Festool-Bohrmaschine-DR-20-E-FF-Set-768933 just the smaller Quadrill https://www.toolstime.de/Festool-Bohrmaschinen-QUADRILL-DR-18-4-E-FFP-Set, which is no slouch and would be compatible with the PDC quick fix chucks I already own..
« Last Edit: January 31, 2017, 03:31 PM by PreferrablyWood »
850 HL E Planer rustic head standard head angle fence, MFS 400x2, MFS extensions MFS VB 700 x 1 MFS VB 1000 x 2 . CMS GE, sliding fence, VB and 2x VL extension tables, OF 2200, Accessory Set ZS OF 2200 M,36mm 5m antistatik hose, CMS OF+ CMS TS 75 insert modules. SYS-MFT Fixing-Set,  3.5m sleeved hose, Syslite duo, Sys 4 sort 3 x3, Sys Roll, Sys 1 Box x2 , classic Sys 3-Sort 4, classic Sys 3 Sort 6 x2, Sys Cart x3 Systainer 4 x2  as toolbox with selfmade inserts Systainer 5 as toolbox with insert.
Festool 18V HKC 55 Li 5.2 EB Plus FSK 420,FSK 250, Extra blade for the HKC 55 W32.TI 15, CXS 2.6 Ah version, RO 90 DX, PDC 18/4 plus DC UNI FF depth stop chuck,AD 3/8 square socket holder FF chuck, Centrotec Bits; -->Bit holder and bit selection BHS 65 CE TL 24x, ,Bradpoint DB WOOD CE SET ,Zobo (Forstner) D 15-35 CE-Zobo SET ,Masonary/stone bits DB STONE CE Set,Extender BV 150 CE, Countersink QLS D2-8 CE Hook turner HD D18, end centrotec<--.  TS 75 EBQ, PSC 420, OF 1010, RS 300 EQ, CTL Midi, MFT 3, Parf dogs x2pair +Bench dogs x2pair, FS 1080, FS 1900 .  will get Domino DF 700 XL,  CMS insert BS 120 Belt sander.

Offline charley1968

  • Posts: 491
Re: Festool Drill Stand
« Reply #41 on: February 11, 2017, 01:34 AM »
I'm on the fence for the Mafell BST 460 S. Haven't found much video footage so if anyone knows alink, feel free..
What i like about it is the ability to drill at a repeatable angle, i  can see some creative uses for that.
Just for today..

Offline neeleman

  • Posts: 1176
Re: Festool Drill Stand
« Reply #42 on: February 11, 2017, 05:28 AM »
Here's a video of the BST 320 which is similar to the 460 model.

Festoolian since 1998.
FESTOOL:
SYSROCK BR10 | SYSLITE KAL II | SV-SYS D14 | DSC-AG125FH | CDD9.6 | SYSLITE DUO | DF700 | HKC55 | TXS2.6 | CTL SYS | CXS2.6 | DWC18 | CTWings | BHC18 | CS50 | CMS-OF | MFT/3 | MFT/3-VL | KS120 | TS55 R | PSC420 | PS420 | BS75 | RAS115 | RO90 | RO150 | DTS400 | RS400 | RTS400 | RS300 | LS130 | DX93 | ETS150/5 | ETS150/3 | OF1010 | OF1400 | OFK500 | MFK700 | T18 | EHL65 | CTL26 | CTL22 | CTL MIDI | WCR1000 | D27-AS Plug-it | D36 UNI-RS | D36x7 | D50x2.5 | FS800 | FS800/2 | FS1080/2 | FS1400/2 (2x) | FS3000/2 | FSK250 | FSK420 | Gecko Dosh | Toolie | CE-SYS-2010 | RB-SYS CART (2x) | LEV1400 | LEV350 | SYS-MFT
PROTOOL:
CHP26 | PDC18 | FLC UNI | VCP260 | DSC-AGP125 | DSC-AGP230 | DSG-AGP125 | DRP16

Offline charley1968

  • Posts: 491
Re: Festool Drill Stand
« Reply #43 on: February 11, 2017, 01:28 PM »
Thank,@neeleman, that's about the only vid i found on google. Though, i believe it's the 46cm or 65 cm version; cuz afaik there's no 32cm version where one can rotate the pillar.
Just for today..

Offline TinyShop

  • Posts: 52
Re: Festool Drill Stand
« Reply #44 on: January 05, 2018, 09:21 PM »
I just stumbled on the following Made in Germany and very reasonably priced line of drill stands:

https://www.wabeco-remscheid.de/catalog/category/view/s/drill-stands-and-accessories/id/104/

And now commences the oft repeated search for a retailer (maybe the manufacturer?) that is willing to send one across the pond....

Oh, but before I begin the search: all of the drill stands I've found that are marketed on the Atlantic's right coast are designed for drills that have a "43mm neck size". I'm away from my tools at the moment so I can't verify what "neck size" my ~decade-old US-made 1/2" Milwaukee drill has. But, if I had to guess, I'd wager it's not 43mm. I only assume this based on our tendency in the U.S.A. to not adopt standards that the rest of the world uses. Anyways, does anyone know how the neck sizes of our drills compare to the 43mm standard? IOW, are our drills compatible with Euro-drill stands?

The only English-language video review I can find:



Edit: FWIW there are several eBay sellers that are specifying shipping to the U.S.A. for a selection of these drill stands. That makes it easy.
« Last Edit: January 05, 2018, 09:49 PM by TinyShop »

Offline Cheese

  • Posts: 3860
Re: Festool Drill Stand
« Reply #45 on: January 06, 2018, 11:57 AM »
I'm away from my tools at the moment so I can't verify what "neck size" my ~decade-old US-made 1/2" Milwaukee drill has. But, if I had to guess, I'd wager it's not 43mm.

I believe it's 46mm because I was also looking at using the Wabeco stand with a 1/2" Milwaukee for simple outdoor projects when you're away from the drill press.

Offline TinyShop

  • Posts: 52
Re: Festool Drill Stand
« Reply #46 on: January 06, 2018, 03:01 PM »
I'm away from my tools at the moment so I can't verify what "neck size" my ~decade-old US-made 1/2" Milwaukee drill has. But, if I had to guess, I'd wager it's not 43mm.

I believe it's 46mm because I was also looking at using the Wabeco stand with a 1/2" Milwaukee for simple outdoor projects when you're away from the drill press.

OK, thanks so much for the info!

And, although you correctly assumed that my drill has a "neck" (I've noticed that many drills nowadays - at least those that don't have an allowance for the installation of a right angle stabilizing handle - go directly from motor housing to the spinning end of the drill, so no "neck" to speak of) I should have stated that my drill features a splined neck that is designed to accept the right-angle stabilizing handle that it originally came with. This uniform "neck" gives me some hope that I can make my corded drill work with a euro-drill stand. Now to contact Wabeco to see if they can assist in devising a workaround to my drill's non-standard neck diameter/design.

I should note that I don't have a shop (only a storage room) which is the primary reason behind my moving in the direction of a drill stand. I don't want (nor do I want or have the dedicated space for) a drill press. Plus, I'm addicted in all areas of my life to tools/devices/spaces/stuff that have multiple uses/functions - like a telephone that is also still camera, video camera, audio recorder, computer, etc., or a TS 75 which is a track saw but also the business-end of my CMS table saw (w/sliding table), the latter of which is also my router table, soon-to-be sanding table and soon-to-be jigsaw table, etc. For my various uses (and owing to the self-imposed limitations demanded by my oath to voluntary simplicity), my mantra is, "Why own a dedicated tool when I can own one that can accomplish multiple functions?" Therefore, a high quality drill stand (which I can also perhaps adapt to my Fein Mulitmaster, which, as its name implies, is also adept at accomplishing numerous tasks) is right up my alley. ;)       

Offline TinyShop

  • Posts: 52
Re: Festool Drill Stand
« Reply #47 on: January 06, 2018, 03:28 PM »
I just discovered that what I assumed comprised the Fein "drill stand" is actually just an adapter designed to fit "popular" drill stands thus allowing the Fein MM (or, for that matter, the Vecturo) to work in conjunction with what are otherwise "standard" Euro-drill stands. This dovetails nicely with the recent discussion that appears elsewhere on this forum about the compatibility between the Vecturo and the Fein-branded drill stand adapter (and other Fein-branded accessories):

 http://festoolownersgroup.com/festool-jigs-tool-enhancements/fein-table-top-and-drill-jigs-support-with-vecturo/msg533533/#msg533533

Should be an easy matter procuring the adapter to allow the Vecturo (or, in my case, the Fein MM) to be used in conjunction with any "standard" drill stand - like those produced by Wabeco - should I encounter the need.

« Last Edit: January 07, 2018, 12:05 AM by TinyShop »